Instruction/ maintenance manual of the product 9000422 E Keyspan
Go to page of 12
Ref. No. 009775 Edition C April 2002 SEA Full Face Mask 9000422 E.
.
1 User Instructions SEA FULL F ACE MASK SEA Full Face Mask, Natural Rubber Model No. FN SEA Full Face Mask, Silicone Rubber Model No. FS SEA Full Face Mask, Chloropr ene Rubber Model No. FC SEA Full Face Mask Procomp Model No. FP 1. General The SEA full face mask is a panorama full view mask.
2 3. Selection of breathing pr otector equipped with filter – Applies to NON-USA users T ype of protective device Multiples of threshold concentration Remarks, limitations Full face mask with partic.
3 5. Maintenance and storage 5.1 T est for function and leak-tightness If components have been replaced (visor , valve discs or speech diaphragm), a test for function and leak-tightness must be carried out with an appropriate test device (e.g. Pr o-T ester).
4 5.4 Replacing the inhalation valve discs • Remove the connector lid. • Remove the rubber inhalation valve seat (by pulling from the tip) (fig. 13). • Remove the inh. valve disc (fig. 14) and replace it. • Put the valve seat back to the bottom of the valve body .
5 5.7 Cleaning Remove the filter , exhalation valve, inhalation valves, spectacle frame and speech diaphragm. Clean the facepiece and the components with lukewarm water and mild deter gent (neutral, pH 6-8) (e.g. washing-up liquid). A brush can be used for stubborn dirt.
6 6. Spare parts Item Description Part number Comments 1 Faceblank - New mask 2 & 3 Buckle with retainer FF-B - 4 Visor options: Polycarbonate (standard) Hard coated polycarbonate Laminated triple.
7 NOTES.
8 NOTES.
.
Safety Equipment Australia Pty Ltd A.C.N.: 002 727 586 North Shore Business Park 35/1 Jubilee Avenue, W arriewood NSW 2102, Australia Mail: Private Bag, Mona V ale NSW 2103, Australia T elephone: [+61] (0)2 9910 7500 — Fax: [+61] (0)2 9979 5364 Email: seansw@sea.
An important point after buying a device Keyspan 9000422 E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Keyspan 9000422 E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Keyspan 9000422 E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Keyspan 9000422 E you will learn all the available features of the product, as well as information on its operation. The information that you get Keyspan 9000422 E will certainly help you make a decision on the purchase.
If you already are a holder of Keyspan 9000422 E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Keyspan 9000422 E.
However, one of the most important roles played by the user manual is to help in solving problems with Keyspan 9000422 E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Keyspan 9000422 E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
