Instruction/ maintenance manual of the product XR622 Solid State Logic
Go to page of 10
Super -Analogue™ Outboar d XR622 X-Rack Master Module User ’s Guide This documentation package contains the User ’s Guide for your new X-Rack Master module. Depending on the age of your X-Rack, these pages may already be pr esent in your X-Rack Owner ’s Manual – please check to see if these pages match your Manual.
.
P age F-1 X-Rack Master Module F . Master Module F .1 Introduction Used in conjunction with the XR623 X-Rack Line Return module, the XR622 X-Rack Master module provides a complete small scale mix and monitor system for studios seeking a compact solution for mixing and monitoring in the analogue domain.
P age F-2 X-Rack Owner’ s Manual F .3.2 Monitor Section The Monitor Section enables the Mix and Record busses or a ster eo external input to be monitored, the sour ce to monitor being set by either the ‘MIX’, ‘REC’ or ‘EXT’ switches either separately or together , allowing great flexibility in recor ding and monitoring signals.
P age F-3 X-Rack Master Module F .4 Configuration F .4.1 Dim Level The attenuation applied to the monitor signal when the ‘DIM’ switch is active is set by the T otal Recall processor . The default level is –15dB, it can be adjusted as follows: • Press and hold SETUP/MIDI until the SETUP/MIDI LED flashes.
P age F-4 X-Rack Owner’ s Manual Optionally MIDI controllers can be mapped onto dif ferent Master module functions. T o do this: • Press and hold SETUP/MIDI until the SETUP/MIDI LED flashes. • Use the D-Pot to select ‘ m1 ’ (MIDI Setup). Press the D-Pot to select the MIDI Setup menu.
P age F-5 X-Rack Master Module F .5 Performance Specification The following page contains audio performance specification figures for the X-Rack Master module. No other Solid State Logic products ar e covered by this document and the performance of other Solid State Logic products can not be inferr ed from the data contained herein.
P age F-6 X-Rack Owner’ s Manual F .6 Calibration Information The X-Rack Master module is factory calibrated and should only need calibration if a potentiometer or other component has been replaced or if it is suspected that ther e is a problem with calibration.
P age F-7 X-Rack Master Module F .7 Connector Details Ins Snd, Mix, Rec, Fol Mon Location: Rear Panel Conn’ T ype: 25-pin ‘D’ T ype Female Pin Description Cct 1 Follow Monitor Right (+ve) 8 14 F.
P age F-8 X-Rack Owner’ s Manual F .8 Physical Specification Depth: 200mm / 7.9 inches including front panel knobs, excluding connectors 275mm / 10.9 inches including front panel knobs and connectors Height: 171mm / 6.75 inches W idth: 35mm / 1.4 inches front/r ear panels 49mm / 1.
An important point after buying a device Solid State Logic XR622 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Solid State Logic XR622 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Solid State Logic XR622 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Solid State Logic XR622 you will learn all the available features of the product, as well as information on its operation. The information that you get Solid State Logic XR622 will certainly help you make a decision on the purchase.
If you already are a holder of Solid State Logic XR622, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Solid State Logic XR622.
However, one of the most important roles played by the user manual is to help in solving problems with Solid State Logic XR622. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Solid State Logic XR622 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center