Instruction/ maintenance manual of the product JGFC34SKB Smeg
Go to page of 32
Instruction manual COOKER 90 X 60 60 X 60 60 X 50.
3 – 31 Thank you for choosing our product. We advise you to read this manual carefully. It contains all necessary instructions for maintainin g unaltered the appearance and functional qualities of the cooker.
Contents 3 1 INSTRUCTIONS FOR S AFE AND PROPER US E _ _______________________________ 4 2 INSTALLATION OF THE APPLIANCE __________________________________________6 3 ADAPTATION TO DIFFERE NT TYPES OF .
Introduction 4 1 INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND TH EREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PL ACE FOR THE WHOLE WORKING LIFE OF THE COOKER. WE ADVISE READING THIS MANUAL AND ALL TH E INS TRUCTIONS THEREIN BEFORE USING THE COOKER.
Introduction 5 LOWER THE GLASS COVER SLOWL Y AND BY HAND. WARNING: THE GLASS COVE R MAY SHATTER IF IT OVERHEATS. SWITCH OFF A LL RINGS AND WAIT FOR THEM TO COOL DO WN BEFO RE CLOSING THE COVER. DURING USE THE APPLIANCE BECOMES VERY HOT. TAKE CARE NOT TO TOUCH THE HEATING ELEMENTS INSIDE THE OVEN.
Instruction for the installer 6 2 INSTALLATION OF THE APPLIANCE It is the law that all gas applia nces are installed by competent persons . Corgi gas installers ar e approved to work to safe and satisfactory standa rd s.
Instruction for the installer 7 2.1 Electrical connection Make sure that the power line voltage m atches the sp ecifications indicated on the rating plate locate d inside the storage compartment.
Instruction for the installer 8 2.1.1 Connection to the gas bottle inside the compartment in the co oker (on some models only) Open the side door and put in a gas b ottle (max. 15 kg). Fit one end of the pipe to the pipe holder and fix it to one of the clamps suppli ed.
Instruction for the installer 9 3 ADAPTATION TO DIFFERENT TYPES OF GAS Before performing any cleaning o r main tenan ce work, detach the appliance from the electrical socket.
Instruction for the installer 10 3.2 Burner and nozzle character istics table (60 cm. models) Burner Rated heating capacity (kW) LPG – G30/G31 28/37 mbar Nozzle diameter 1/100 mm By-pass mm 1/100 Reduced flowrate (W) Flowrate g/h G30 Flowrate g/h G31 Auxiliary 1.
Instruction for the installer 11 3.3 Burner and nozzle character istics table (90 cm. models) Burner Rated heating capacity (kW) LPG – G30/G31 28/37 mbar Nozzle diameter 1/100 mm By-pass mm 1/100 Reduced flowrate (W) Flowrate g/h G30 Flowrate g/h G31 Auxiliary 1 50 30 350 73 71 Semi-rapid 1.
Instruction for the installer 12 3.4 Arrangement of burners on cooking hob BURNERS 1. Auxiliary 2. Semi-rapid 3. Rapid (60 X 60) 4. Triple crown 5. Rapid (60 X 50) 3.5 Arrangement of burners on cooking hob BURNERS 1. Auxiliary 2. Semi-rapid 3. Rapid 4.
Instruction for the installer 13 3.6 Adjustment of the oven bur ner (only for gas oven models) To adjust the oven burners follow the procedure describe d below from inside the oven: • Open the oven door; • Remove the oven dish and shelf. • Lift up the oven floor and remove.
Instruction for the installer 14 4 FINAL OPERATIONS After replacing the nozzles, reposition the flame- spreader crown s, the bu rner caps and the grids. Following adjustment to a gas other than the preset one, replace the gas adjustment label fixed to th e appliance with the one co rresponding t o the new gas.
Instruction for the installer 15 4.4 Mounting the rear top skirtboard (where applicable) • Loosen screws A located bene ath the skirt. • Loosen nuts B . • Position the skirt above th e top, taking care to align pins C with holes D . • Secure the skirt to the top by tightenin g screws E .
Instruction for the user 16 5 DESCRIPTION OF CONTROL PANEL All the oven controls are gro uped together on th e front panel. The table b elow provides a description of the symbols used.
Instruction for the user 17 ELECTRIC OVEN THERMOSTAT KNOB (CERTAIN MODELS ONLY) Selection of cooking temperature is carried o ut by turning the knob clockwi se to the required temperature, between 50 ° and 260 °C. The tell-tale light comes on to indicate that the oven i s warming up.
Instruction for the user 18 6 USE OF THE COOKING HOB 6.1 Lighting of the cooking hob burners Before lighting the hob b urners check that the flam e caps a re in the correct position and t hat thei r burner caps are in place, making su re that the holes A in the flame caps correspond to the spar k plugs and thermocouple s.
Instruction for the user 19 6.3 Diameter of contai ners (60 cm. models) BURNERS (60 X 50) 1. Auxiliary 2. Semi-rapid 5. Rapid Ø min. and max. (in cm. ) 12 – 14 16 – 22 18 – 24 BURNERS (60 X 60) 1. Auxiliary 2. Semi-rapid 3. Rapid 4. Triple crown Ø min.
Instruction for the user 20 6.5 Switching on the electric hob 6.5.1 Switching on the electric hobs The cookers are equi pped with hobs of different di ameters. These are controlled by a switch and are turned on by turnin g the knob to the desi red position.
Instruction for the user 21 7 USE OF THE OVEN For those models with el ectronic programmer, bef or e using the oven make su re that the displa y shows the symbol .
Instruction for the user 22 7.4 Use of the electric grill 7.4.1 Using the grill in coo kers with electric oven For short c ooking proced ures, such as the final cris ping of meat wh ich is already cooked, select the static grill function and turn the thermostat knob to the maximum t emperature.
Instruction for the user 23 How to use the grill Once the grill is lit, the red warn ing light will come on. Leave the oven to heat up for five minutes before placing the food inside. Food should be flavoured and basted with oil or melted butter bef ore cooking.
Instruction for the user 24 7.5.2 Electric lighting of the gas grill burner Having opened the oven door, press the k nob and turn it clockwise to the grill position. Once the burner is lit, hold the knob down for a bout 10 seconds. I f the burner has not come on by this time, release the knob an d wait for at least one mi n ute before trying again.
Instruction for the user 25 8 ELECTRONIC PROGRAMMER (O NLY ON EQUIPPED MODELS) LIST OF FUNCTIONS MINUTE-COUNTER KEY COOKING TIME KEY END-OF-COOKING KEY DECREASE TIME KEY INCREASE TIME KEY 8.1 Clock adjustment When using the oven for the first tim e, or after a power failure, the display flashes reg ularly and indicates .
Instruction for the user 26 8.4 End of cooking When cooking is over, the oven w ill automatically switch off and, at the same time, an intermittent alarm will sound. After switching off the alarm, the display will once again sh ow the right time together with the symbol , indicating that the oven has returned to manual operation mode.
Instruction for the user 27 9 DIGITAL TIMER (CERTAIN MODELS ONLY) This component allows an on-off beeper to be set to indicate the end of the cooki ng time. It is therefore just a timer, wi th no programming functions. LIST OF FUNCTIONS TIME-SETTING BUTTON VALUE DECREASE BUTTON VALUE INCREASE BUTTON 9.
Instruction for the user 28 11 CLEANING AND MAINTENANCE 11.1 Cleaning stainless steel and enamelled versions To maintain stainless steel in g ood condition it mu st be cleaned regularly after ea ch use, once it ha s cooled down.
Instruction for the user 29 11.2.4 The spark plugs and thermocouples To function properly the spark plugs an d thermocouples must always be clea n (on the models which are equipped with them). Check them regula rly and clean with a damp cloth if necessary.
Instruction for the user 30 12 EXTRAORDINARY MAINTENANCE The oven may req uire extraordinary maintenance or replacement of parts subject to wear su ch as seals, bulbs, and so on. The following i nstructions describe how t o carry out these minor maintenance operations.
.
914771991/ C.
An important point after buying a device Smeg JGFC34SKB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg JGFC34SKB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg JGFC34SKB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg JGFC34SKB you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg JGFC34SKB will certainly help you make a decision on the purchase.
If you already are a holder of Smeg JGFC34SKB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg JGFC34SKB.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg JGFC34SKB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg JGFC34SKB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
