Instruction/ maintenance manual of the product HB96CSS-3 Smeg
Go to page of 19
22 Contents INSTRUCTIONS FOR THE USER: these contain user advice, descri ption of the commands and the correct procedures for cleaning an d maintenance of the appliance . INSTRUCTIONS FOR THE INST ALLER: these instructions are intended f or the qualifie d technician who must perform th e installation, put it into operation and test the appliance.
23 Precautions f or use 1. INSTRUCTIONS FOR USE THIS MANU AL IS AN INTEGRAL P AR T OF THE APPLIANCE. IT MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLA CE FOR THE WHOLE WORKING LIFE OF THE HOB. WE URGE Y OU TO READ THIS MANU AL AND ALL THE INFORMA TION IT CONT AINS CAREFULL Y BEFORE USING THE APPLIANCE.
24 Instructions f o r disposal 2. INSTRUCTIONS FOR DISPOSAL – OUR EN VIRONMENTAL CARE Our product's packing is made of non-poll uting materials, therefore compatible with the environment and recyclable . Ple ase help by disposing of the packing corr ectly .
25 Safety inst ructions 3. SAFETY INSTRUCTIONS REFER T O THE INST ALLA TION INSTRUCTIONS FOR THE SAFETY REGULA TIONS FOR ELECTRIC OR GAS APPLIANCES AND VENTILA TION FUNCTIONS.
26 Instructions f or the User 4. KNO W Y O UR APPLIANCE A u xiliar y Bur ner (A UX) Semi-rapid Burner (SR) Rapid Bur ner (R) Ultra-rapid Burner (URP).
27 Instructions f or the User 5. USING THE HOB 5.1 Gas hob Before lighting the hob b ur ners, chec k that the flame-spreader crowns are correctly in place with their respec tive b ur ner caps, making sure that the holes A in the flame-spreaders are a ligned with the plugs and ther mocouples.
28 Instructions f or the User 5.2 Practical ti ps for us ing the burner s F or better burn er efficiency and to minimise gas consumption , use pans with a flat, smooth base and a lid that hav e a suitable siz e for the burner , thus av oiding that the flames reach the side s of the pan (see point "5.
29 Instructions f or the User 6. CLEANING AND MAINTENANCE NEVER USE A JET OF STEAM FOR CLEANING THE APPLIANCE. Before performing an y opera tio ns requiring access to powered parts, switch off the po we r suppl y to the appliance. 6.1 Cleaning s tainless stee l T o keep stainless steel in good condition it shou ld be cleaned regular ly after use.
30 Instructions f or the installer 7. INST ALLING THE APPLIANCE 7.1 P ositioning This is a class 1 ( B2 ) and 3 ( A , B1 )appliance. The f ollowing operation requires buil ding and/or carpentr y work , theref ore it must be carried out by a skilled technician.
31 Instructions f or the installer 7.3 Heights f or type B installation (full base) B 1 B 2 DIST ANCES B C L H MINIMUM 630 mm 50 mm 904 mm 750 mm MAXIMUM 650 mm ---.
32 Instructions f or the installer 7.3.1 Sup porting base Make two openings in the rear par t of the base as descr ibed in the figure below . The left opening must be used for gas connections , and the r ight one for electrical connections.
33 Instructions f or the installer 7.4 Mounting for t ype A installations Once the hob is correctly positioned in its suppor t, place the brack ets ( A ) ov er the bottom par t of the product ( B ). Attachment requires 2 brackets f or each side of the hob .
34 Instructions f or the installer 7.5 Mounting for t ype B installations Once the hob is correctly positioned on th e suppor ting base, complete the mounting by tightening the pro duct using the 4 supplied metric screws , by screwing them through the 8mm Ø holes made bef ore installation.
35 Instructions f or the installer 7.6 Electrical connection Make sure that the v oltage and capaci ty of the power line conf or m to the data shown on the plate located under the casing. Do not remove this plate f or any reason. The appliance must be connected to ear th i n compliance with electr ical system safety regulations.
36 Instructions f or the installer 8. GAS CONNECTION Bef ore installation, m ake sure th at the local distr ibution conditions (n ature and pressure of the gas) and the state of regulation of the appliance are compatib le.
37 Instructions f or the installer Installation with th e fle xible hose must be carried out so that the length of the piping does not exceed 2 metres fully e xtend ed; make sure that the hoses do not come into contact wi th moving parts and that they are not crushed in any wa y .
38 Instructions f or the installer 9. AD APT A TION T O DIFFERENT TYPES OF GAS Before carrying out the following operations, disconnect the appliance from the electricity supply . The appliance is preset for natural gas G2 0 (2H) at a pressure of 20 mbar .
39 Instructions f or the installer 9.2 Burner and nozzle c haracteristics table Rapid R ATED HEATING CAPACITY ( K W) LPG – G30/ G31 28/37 mbar Nozzle diameter 1/100 mm By-pass 1/100 mm Reduced capacity (W) Capacity g/h G30 Capacity g/h G31 Au x i l i a r y ( 1 ) 1.
40 Instructions f or the installer 10. FINAL OPERATIONS FOR GAS APPLIANCES After making the adjustments descr ibed above , reassemble the appliance by f ollowing the instruction s in point "9.1 Replacement of n ozzles on the hob" in rev erse order .
An important point after buying a device Smeg HB96CSS-3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg HB96CSS-3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg HB96CSS-3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg HB96CSS-3 you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg HB96CSS-3 will certainly help you make a decision on the purchase.
If you already are a holder of Smeg HB96CSS-3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg HB96CSS-3.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg HB96CSS-3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg HB96CSS-3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
