Instruction/ maintenance manual of the product GKL64-3 Smeg
Go to page of 15
Table of Contents 19 1. Precautions for safety and use ________________________ 20 2. Fitting the appliance in the top ________________________ 21 2.1 Fixing to the suppo r ting structu re _______________________________________21 3. Electrical connection ________________________________ 23 4.
Precautions for Safety and Use 20 1. Precautions f or safety and use THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. TAKE GOOD CARE OF IT AND KEEP IT TO HAND THROUGHOUT THE HOB'S LIFE CY CLE. USERS ARE ADVISED TO READ THIS MANUAL AND ALL THE INSTRUCTIONS IT C ONTAINS BEFORE USING THE HOB.
Instructions for the Installer 21 2. Fitting the appliance in the top The procedures required below must be carried out by a skilled builder and/or joi ner. The hob can be installe d on various material s, including masonry, metal, solid wood and wood finished with plastic lamin ates, pr ovided the material is heat-resistant (T 90° C).
Instructions for the Installer 22 Fit the insulating gasket provided carefu lly around the outside edge of the hole made i n the top as shown below, pressi ng it down with your hands so that its entire surface fits snugly.
Instructions for the Installer 23 3. Electrical connection Check that the power su pply line voltage and size are as specified on the n ameplate underneath the applian ce's casing.
Instructions for the Installer 24 4. Gas connection If the appliance is installed above an ov er, t he gas hose must be passe d around the back of the oven to prevent overheating. The connection to the gas mains ma y be made using a copper pip e or a continuous-wall steel hose in accordance with the relev ant regul ations.
Instructions for the Installer 25 4.1 Bottled gas connection Use a pressure regulator and ma ke the conne ction to the gas cylinder in a ccordance with the relevant regulations. Make sure that the gas supply pressure is as st ated in the table in point "5.
Instructions for the Installer 26 5. Adapting to dif ferent types of gas Before carrying out the operations describ ed below, disconnect the a ppliance from the electricity supply. The hob is tested with G20 (2H) natural gas at the pressure of 20 mbar.
Instructions for the Installer 27 5.2 Adjusting fo r bottled gas Burner Nominal heat capacity (kW) Bottled gas – G30/G31 30/37 mbar Nozzle diameter 1/100 mm By-pass mm 1/100 Reduce d heat capacity (W) Capacity g/h G30 Capacity g/h G31 Auxiliary 1.05 48 30 400 76 75 Semi rapid 1.
Instructions for the Installer 28 5.4 Adjusting fo r natural gas The appliance is tested with G20 (2H) natural gas at the pressure of 20 mbar. To return the appliance to the condition required to use this ty pe of gas, proce ed as described in point “5.
Instructions for the Installer 29 5.7 Adjusting the minim um setting for natural gas and town gas Reassemble the compone nts on the burner and fit the knobs onto the tap rods.
Instructions for the User 30 6. Description of contr ols 6.1 The fr ont panel All the hob's control and monitori ng devices are placed together on the front panel.
Instructions for the User 31 7. Using the hob Check that the fixing rings, burn ers, flame diffuser rings a nd pan stands are fitted correctly. The burner pins A must be fitted into the recesses B in the flame diffuser ring. The holes C in the flame diffuser ring must mate with the ignition plugs and thermocouples D on the hob.
Instructions for the User 32 7.4 P an diameters BURNERS 1 Auxiliary 2 Semi rapid 3 Rapid 4 Double flame 5 Ultra rapid 6 Rapid 7 Rapid 8 Double flame min.
Instructions for the User 33 8. Cleaning and maintenance Before carrying out any operations, disconnect the ap pliance from the electricity supply. 8.1 Cleaning stainless steel To keep the hob in good condition, it must be clea ned regularly, after each use, first allowing it to cool.
An important point after buying a device Smeg GKL64-3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg GKL64-3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg GKL64-3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg GKL64-3 you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg GKL64-3 will certainly help you make a decision on the purchase.
If you already are a holder of Smeg GKL64-3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg GKL64-3.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg GKL64-3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg GKL64-3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
