Instruction/ maintenance manual of the product Freestanding Cooker CSA150X-6 Smeg
Go to page of 40
Table of Contents 1. PRECAUTIONS FOR SAFETY AND USE ____________________________ 4 2. INSTALLING THE APPLIANCE ____________________________________ 6 3. ADAPTATION TO DIFFERENT TYPES OF GAS ______________________ 12 4. FINAL OPERATIONS ___________________________________________ 14 5.
Presentation 1. PRECA UTIONS FOR SAFETY A ND USE THIS MANUAL IS AN INTEGR AL PART OF THE APPLIANCE. TAKE GOOD CARE OF IT AND KEEP IT TO HAND THROUGHOUT THE COOKER'S LIF E CYCLE. USERS ARE ADVISED TO READ THIS MANUAL AND ALL THE INSTRUCTIONS IT CONTAINS BEFORE USING THE COOKER.
Presentation THE NAMEPLATE WITH THE T ECHNICAL DATA, SERIAL NUMBER AND MAR K IS IN A VISIBLE POSITION IN THE STORAGE COMPARTMENT. THE NAMEPLATE MUST NEVE R BE REMOVED . NEVER PLACE PANS WITH BOTTOMS WHICH ARE NOT PERFECTLY FLAT AND SMOOTH ON THE HOB PAN STANDS.
Instructions for the Installer 6 2. INST ALLING THE APPLIANCE It is the law that all gas appliances ar e installed by authorised persons . Clearance around the cooker must comply with the requirements of AS5601.
Instructions for the Installer The appliance has a termin al board on its rear. To access it, remove the back cover. Make the electrical connecti on in accordance with t he wiring diagram shown below. Operation at 380-415V3N ~: use a H05RR-F or H05RN-F five-wire cable (cable of 5 x 2.
Instructions for the Installer 8 Overall dimensions: location of g as and electrical connection points (all measures in mm). A 110 B 760 C 170 D 150 2.3 Gas connection This appliance is suitable f or installati on with Natural Gas or ULPG (propane). Refer to page 13 for the relevant burner press ure and appr opriate injector sizes.
Instructions for the Installer parts are placed in the correct positio n. When the installatio n is completed the installation connections of cooker will r e quire to be leak tested, the burner operating pr essure and fl ame checked and adjusted.
Instructions for the Installer 10 2.5 Clearance above and around domestic cookers Extract from AS5601 REQUIREMENTS 1 Overhead clearances – (Mea surement A ) Range hoods and exhaust fans sha ll be installe d in accordanc e with the manufacturer’s instructio ns.
Instructions for the Installer 2.6 depth) of the cooking surfac e area. Where the cook ing applian ce is fitted with a ‘splashback’, protection of the rear wall is not requir ed.
Instructions for the Installer 12 3. AD APT A TION T O DIFFERENT TYPES OF GAS Before performing any clea ning or maintenanc e work, switch off the power supply to the appliance . The cooking hob of the cooker is preset for G20 natural gas at a pressure of 20 mbar.
Instructions for the Installer 3.2 Burner and nozzle characte ristics table Burner ULPG ( PROPANE ) – 2.75 KPa Nominal gas consu mption (MJ/h) Injector (mm) Auxiliary 3.9 0.54 Semi rapid 6.3 0.68 Rapid 10.8 0.88 Fish Burner 6.8 0.72 WOK 13.5 1.00 DUAL WOK Inner ring 3.
Instructions for the Installer 14 4. FINAL OPERA TIONS After changing the nozzles, put t he p an stands, the bur ner caps and flame diffuser rings back in place. After adjusting for use of a gas other th an the gas used for testing the appliance, repl ace the gas s etting label on the applianc e with the l abel for the new gas.
Instructions for the User 5.1 5. DESCRIPTION OF CONTROLS The front panel All the cooker's control and monitori ng d evices are placed togeth er on the front panel. At first use after a power blackout, press th e middle knob for 1 / 2 seconds to enable oven cook ing operations.
Instructions for the User 16 LEFT-HAND OVEN FUNCTION SELECTOR KNOB Turn the knob to select one of the followin g functions: NO FUNCTION SET GRILL ELEMENT + FAN TOP AND BOTTOM HEATING ELEMENTS TOP AND .
Instructions for the User RIGHT-HAND OVEN THERMOSTAT KNOB The cooking temperature is set by turning the knob clockwise to the value req uired, between 50° and 2 80° ( )C. The light comes on to indicate that the oven is heating up. This light goes out whe n the set temperatur e is reached.
Instructions for the User 18 5.2 Electronic Analogue Clo ck (left/right oven) LIST OF FUNCTIONS MINUTE-MINDER BUTT ON END OF COOKI NG BU TTON CLOCK ADJUSTMENT AND RESET VALUE DECREASE BUTTON VALUE INCREASE BUTTON 5.
Instructions for the User 5.2.2 Minute-Minder - This function does not stop cooking; it simply activates the buzzer. Press the key and the display will ligh t up as shown in figure 1; 1 2 - Within 6/7 seconds, pr ess the or keys to set the minute-minder.
Instructions for the User 20 5.2.3 Programming Cooking duration: the 2nd button can be pressed to se t the cooking duration. Before it can be s et, the thermostat must be turned to the cooking temp erature required and the f unction selector knob to any setting.
Instructions for the User Starting cooking: as well as setting a cooking duration, the cooki ng start time can also be set (wit h a maximum dela y of 12 hours from the curre nt time). To set the cooking start/end time, proceed as follows: - Set the cooking duration as d escribed in the previous point.
Instructions for the User 22 6.1 6. USING THE HOB Lighting the hob burners Before lighting the hob burn ers check tha t the flame diffuser ring s are correctly in pla ce with their re specti ve burner caps, making sure that th e holes A in the flame diffusers are aligned with the plugs and thermocouples.
Instructions for the User 6.2 Practical hints for using the hob burn ers For better burner efficiency and to min imise gas consumpt ion, use pans with lids of sui table size for t he burne r, so that flames do not re ach up the sides of the p an (see point "6.
Instructions for the User 24 7.1 7. USING THE O VENS Precautions and General Advice When the oven is used for the first time, it should be h eated to the maximum temperature (250-220°C) for lo ng enough to burn off any oily residues left by the manufacturing pr ocess, which migh t contaminate foods with unpleasant smells.
Instructions for the User 8. USING THE "PIZZA" FUNCTION This appliance is equippe d with a functio n specially developed for coo king pizza. This function is identifi ed by the symbol on the oven function s knob. To cook a pizza, proce ed as descr ibed below.
Instructions for the User 26 8.2 Attention • Grilling processes must never last more than 60 minutes. • The oven door must be closed during gr ill and grill + rotisserie cooking operations. • To prevent hazardous overheating, the ap pliance's glass lid must always be raised when usin g the oven or grill.
Instructions for the User 9. A CCESSORIES A V AILABLE The oven is fitted with 4 runners for placing trays and shelves at different heights. Oven shelf: for cooking food on plates, small cakes or roasts or foods requiri ng light grilling. Tray grid: for placing on top of a tray for cooking foods which may drip .
Instructions for the User 28 Chromium-plated gripper: useful for removing hot shelves and tray s. Roof liner: remove it to simplify cl eaning inside the oven. Pizza plate: specially design ed for cooking pizza. For use as described in point "8 Using the "pizza" function".
Instructions for the User 10. COOKING AD VICE The oven should always be preheated in fan mode to 30/40°C above the cooking temperature. This consi derably shortens c ooking times and reduces electricity consumption, as well as giving better results. The oven door must be closed during coo king operations.
Instructions for the User 30 10.2 Hot air cooking (left/right oven ) FUNCTION SELECTOR THERMOSTAT SET AT 50 - 250°C THERMOSTAT SET AT 50 - 280°C ( ) This system is suitable for cooking on sev eral shelves, even with foods of different kinds (fish, meat, et c.
Instructions for the User 10.4 Hot-air grilling (left/right oven) FUNCTION SELECTOR THERMOSTAT FROM 50° C TO 200°C THERMOSTAT FROM 50° TO 200°C Allows uniform heat distribution w ith better penetration to the c ore of foods. Foods are lightly browned on the outside but sti ll soft on the inside.
Instructions for the User 32 10.6 Rotisserie cooking (left-hand oven) FUNCTION SELECTOR THERMOSTAT SET AT 50 -250°C Prepare the spit with the fo od, block ing fork screws A . Insert frame B into the third guide from the bottom. Remo ve handle D and position the spit shaft so that pulley E is gui ded on the link of fram e B in the right side.
Instructions for the User 10.7 Recommended cooking tables Cooking times , for meat in particular, vary dep ending on the f ood's thickness and quality an d personal prefer ence.
Instructions for the User 34 HOT-AIR COOKING RUNNER HEIGHT FROM BOTTOM TEMPERATURE (°C) TIME IN MINUTES PASTA LASAGNE PASTA BAKES CREOLE RICE 2 2 2 190 - 210 190 - 210 190 - 220 20 - 25 25 - 30 20 - .
Instructions for the User 11. CLEANING AND MAINTENANCE Never use a jet of steam for cleaning the inside of the oven . 11.1 Cleaning stainless steel To keep stainless steel in good cond ition, it must be cleaned regularly, after each use, first allowing it to cool.
Instructions for the User 36 11.2 Cleaning the hob components Before carryi ng out any operation in volving ac cess to live pa rts, disconnect the appli ance from th e electricity supply.
Instructions for the User 11.2.4 The burner caps, flame di ffuser rings and burners The burner caps and flame diffuser rin gs can be removed for easier clea ning; wash them in hot wat er and non-abrasive detergent, taking care to remove all deposits, and wait for them to dry completely.
Instructions for the User 38 11.3.1 Oven liners (main oven) The main oven is fitted w ith enamell ed liners that are co ntinuously self- cleaning. These liners simplify c leaning of the ove n and ensure it continues to perform well over time.
Instructions for the User 11.4 Door glazing The glass in t he door shoul d always be kept thoroughl y clean. Use absorbent kitchen rol l; remove stubborn dirt with a damp spon ge and ordinary detergent. Do not use abrasive or corrosive clea ners for cleaning the door gl azing.
Instructions for the User 40 • Before cleaning, remove a ny dirt burnt onto the stone with the aid of a metal spatula or a scraper of the kind used for clean ing ceramic hobs; • For best results, .
Instructions for the Installer 12. EXTRA ORDINAR Y MAINTENANCE Occasionally, the ovens will require minor servicing proc edures or the replacement of parts subject to wear and tear, such as gaskets, light bulbs, etc. The specific operations fo r eac h procedure of this kind are provided below .
Instructions for the Installer 42 12.2 Removing the door Open the door complet ely and insert t he pins (supplie d) into the holes from the inside. Close the door to an an gle of about 45° and lift it off. To reassemble, fit the hing es into their groov es, then lower the door into pl ace and extract the pins.
An important point after buying a device Smeg Freestanding Cooker CSA150X-6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg Freestanding Cooker CSA150X-6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg Freestanding Cooker CSA150X-6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg Freestanding Cooker CSA150X-6 you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg Freestanding Cooker CSA150X-6 will certainly help you make a decision on the purchase.
If you already are a holder of Smeg Freestanding Cooker CSA150X-6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg Freestanding Cooker CSA150X-6.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg Freestanding Cooker CSA150X-6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg Freestanding Cooker CSA150X-6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
