Instruction/ maintenance manual of the product Built-in Hob SE435XT Smeg
Go to page of 12
Dear Customer, Thank you for having purchased one of our products. We are certain that this new, modern, functional and practical appliance, built with the very highest quality materials, will meet your requirements in the best possible way. This hob is easy to use.
2 1 Normal plate Ø 145 of 1000 W 2 Normal plate Ø 180 of 1500 W 7 Control knob for electric plate n° 1 8 Control knob for electric plate n° 2 13 Warning light indicating that one or more plates ar.
3 USE 1) SWITCHING ON THE ELECTRIC PLATES The hobs may be equipped with three types of electric plates: normal, thermostat and rapid plates indicated by a red mark. The normal plates and the rapid plates are controlled by a 7 - position switch (see fig.
4 USE WARNINGS: When the plate is switched on for the first time, or if it has remained unused for a long period, it should be dried for 30 minutes on switch position n° 1. This will eliminate any moisture that may have been absorbed by the insulating material.
5 CLEANING IMPORTANT: Always disconnect the appliance from the electricity main before carrying out any cleaning operation. 3) HOTPLATE If you want to preserve the surface clean and bright, periodically wash the hot plate with lukewarm soapy water. Following this, all parts should be thoroughly rinsed and dried.
6 INSTALLATION Installation and maintenance must only be carried out by a qualified installer. Incorrect installation could cause damage to persons, animals and property for which the manufacturer cannot be held responsible.
7 INSTALLATION FIG. 8 6) ELECTRICAL CONNECTIONS Electrical connection must be carried out in compliance with the specifications and provisions in force.
8 CONVERSIONS Disconnect the appliance from the mains supply prior to any conversions being carried out. 7) CHANGING THE TYPE OF POWER SUPPLY Although they leave our factory preset for single- phase connection, certain appliances may by converted to the threephase system.
9 SERVICING Always disconnect the appliance from the electricity main before proceeding with any servicing operation. 8) REPLACING THE ELECTRICAL COMPONENTS For access to the various parts, remove the hotplate from the top of the cabinet. Then overturn it, unscrew screw “Z” and remove under part.
VOLTAGE 110 V~ FREQUENCY 50/60 Hz TOT. RATING 5000 W MODEL WITH 4 NORMAL PLATES 10 TECHNICAL DATA.
11 TECHNICAL ASSISTANCE AND SPARE PARTS This appliance, before leaving the factory, has been carefully tested and regulated by expert and specialized personnel in order to guarantee the best performances. Any repairs or adjustments which may be subsequently required may only be carried out by qualified personnel with the utmost care and attention.
12.
An important point after buying a device Smeg Built-in Hob SE435XT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg Built-in Hob SE435XT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg Built-in Hob SE435XT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg Built-in Hob SE435XT you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg Built-in Hob SE435XT will certainly help you make a decision on the purchase.
If you already are a holder of Smeg Built-in Hob SE435XT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg Built-in Hob SE435XT.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg Built-in Hob SE435XT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg Built-in Hob SE435XT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
