Instruction/ maintenance manual of the product Built-in Electric Hob SA435X-1 Smeg
Go to page of 8
Dear Customer, Thank you for having purchased one of our products. We are certain that this new, modern, functional and practical appliance, built with the very highest quality materials, will meet your requirements in the best possible way. This appliance is easy to use.
2 1 Normal plate Ø 145 of 1000 W 2 Normal plate Ø 180 of 1500 W 3 Rapid plate Ø 145 of 1500 W 4 Rapid plate Ø 180 of 2000 W 5 Thermostat plate Ø 145 of 1500 W 6 Thermostat plate Ø 180 of 2000 W .
3 USE 1) SWITCHING ON THE ELECTRIC PLA TES The hobs may be equipped with three types of electric plates: normal, thermostat and rapid plates indicated by a red mark. The normal plates and the rapid plates are controlled by a 7 - position switch (see fig.
IMPORT ANT : Always disconnect the appliance from the electricity main before carrying out any cleaning operation. 3) HOTPLA TE If you want to preserve the surface clean and bright, periodically wash the hot plate with lukewarm soapy water. Following this, all parts should be thoroughly rinsed and dried.
5 INST ALLA TION Installation and maintenance must only be carried out by a qualified technician. Incorrect installation could cause damage to persons, property and animals for which the manufacturer cannot be held responsible.
6 CONVERSIONS Disconnect the appliance from the mains supply prior to any conversions being carried out. 7) CHANGING THE TYPE OF POWER SUPPL Y Although they leave our factory preset for single- phase connection, certain appliances may by converted to the threephase system.
7 SER VICING Always disconnect the appliance from the electricity main before proceeding with any servicing operation. 8) REPLACING THE ELECTRICAL COMPONENTS For access to the various parts, remove the hotplate from the top of the cabinet. Then overturn it, unscrew screw “Z” and remove under part.
VOLTAGE 240 V~ FREQUENCY 50/60 Hz TOT. RATING 7000 W MODEL WITH 2 RAPID PLA TES + 2 THERMOST A T PLA TES VOLTAGE 240 V~ FREQUENCY 50/60 Hz TOT. RATING 6000 W MODEL WITH 2 RAPID PLA TES + 2 NORMAL PLA TES (with protector) VOLTAGE 240 V~ FREQUENCY 50/60 Hz TOT.
An important point after buying a device Smeg Built-in Electric Hob SA435X-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg Built-in Electric Hob SA435X-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg Built-in Electric Hob SA435X-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg Built-in Electric Hob SA435X-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg Built-in Electric Hob SA435X-1 will certainly help you make a decision on the purchase.
If you already are a holder of Smeg Built-in Electric Hob SA435X-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg Built-in Electric Hob SA435X-1.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg Built-in Electric Hob SA435X-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg Built-in Electric Hob SA435X-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
