Instruction/ maintenance manual of the product SMCWPCI-N2 SMC Networks
Go to page of 36
EZ Connect™ N Pro Draft 11n Wireless PCI Adapter SMCWPCI-N2.
i LIMITED W ARRANTY Limited W arrant y S tatement: SMC Networks, Inc. (“SMC”) warrants it s products to be free from defects in workmanship and materials, under normal use and service , for the applica ble warranty term. All SMC products c arry a standard 90-day limited warrant y from the date of purchase from SMC or its Authorized Reseller .
ii LIMIT A TION OF LIABILITY : IN NO EVENT , WHETHER BASED IN CO NTRACT OR TO RT (INCLUDIN G NEGLIGENCE) , SHALL SM C BE LIABLE FOR IN CIDENT AL, CON SEQUENTIA L, INDIRECT , SPECIAL, OR PUNITIVE DAMAG.
iii Compliances Federal Communica tion Commission In terference St atement This equipment has b een tested and foun d to comply wi th the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to p rovide reasonable protection against harmful interf erence in a residential ins tallation.
iv Compliances Europe – EU Declaration of Conformity This device complies with the essential requirem ents of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order.
v Compliances Council recommendation 1999/519/EC of 12 July 1999, limitations of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz) Č esky [Czech] SMC Networks tímto prohlašuje, že tento Radio LAN device je ve shod ě se základními požadavky a dalšími p ř íslušnými ustanoveními sm ě rnice 1999/5/ES.
vi Slovensky [Slovak] SMC Networks týmto vyhlasuje, že Radio LAN device sp ĺň a základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
5 Table of Contents Chapter 1 - Getting Started with the SMCWPCI-N2 6 C h a p t e r 2 - W i r e l e s s L A N N e t w o r k i n g 7 T r a n s m i s s i o n R a t e ( T r a n s f e r R a t e ) 7 T y p .
6 Chapter 1 - Getting S t arted with the SMCWPCI-N2 Congratulations on purchasing the SMCWPCI-N2. This manual provides information for setting up and configuring the SMCWPCI-N2.
7 Chapter 2 - Wireless LAN Networking This section provides background information on wireless LAN networking technolog y . T HE INFORMA TION IN THIS SECT ION IS FOR YOUR REFERENCE. C HANGING NETWORK SETT INGS AND P ARTICULARL Y SECURITY SETTTINGS SHOULD ONL Y BE DO NE BY AN AUTHORIZED ADMI NISTRA TOR.
8 communicate directly to each other . An ad-hoc network may sometimes be referred to as an Independent Basic Service Set (IBSS). T o set up an ad-hoc network, configure all the st ations in ad-hoc mode. Use the same SSID and channel for each station .
9 When a number of wireless stations are connecte d using a single access p oint, you have a Basic Service Set (BSS)..
10 In the ESS diagram below , commu nication is done through the access point s, which relay data packet s to other wireless stations or devices connected to th e wired network. Wireless stations can then access resources, such as a printer , on the wired network.
11 In an ESS en vironment, users are able to move fr om one access point to another wi thout losing t h e connection. In the diagram below , when the user moves from BSS (1) to BSS (2) the SMCWPCI-N2 automatically switches to the channel used in BSS (2).
12 Wireless L AN Security Because wireless networks are not as secure as wire d networks, it’s vital that security settings are clearly understood and applied. The list below shows the possible wireless secu rity levels on your SMCWPCI-N2 starting with t he most secure.
13 Chapter 3 - Hardware and Wireless Utility This chapter introduces the Adapter and prepares you to use the Wireless Utility. About Your Draft 11n Wireless PCI Adapter With the Adapter, you can enjoy wireless mobility within almost any wirele ss networking environment.
14 Hardware and Wireless Utility Installation Follow the instructions be low to install the PCI Ca rd and Wireless Utility. Do not insert the EZ Connect™ N Wirel ess PCI Adapter until instructed. 1. Put the EZ Installation & Document ation CD in to your CD-ROM drive.
15 4. T o install to the default folder location click [Next] . It is recommended to use the default folder location unless you are an advan ced user . T o change the installation folder click the [Browse] button and specify a new location. Click [Next] to continue .
16 8. T urn off your compute r . 9. Insert the EZ Conne c t™ N Wireless PCI Adapter in to an available PCI slot. IMPORT ANT : For correct inst allation of new hardware please refer to your Computer use r manual. 10. Once the EZ Connect™ N Wireless PCI Adapter is inserted screw on the antenna s.
17 14. A “Hardware Inst allation” warning may appear , click [Continue Anyway]. 15. Click [Finish] to complete the Driver/Utility installation..
18 Using the Utility to Configure Your Network The following are explanations on how to configure a nd use the Utility program. After completing the installation procedure, a new ico n as shown below will automatically appear in the lower right tray bar.
19 The following table describes the items found o n the Link Information screen. Wireless Network St atus Profile Name The name of the current selected configuration profile. Set up the configuration name on the Profile t ab. SSID Displays the wireless network name.
20 channel Channel Wid th 20MHz only or 40/20MHz channel support Security S tatus Security Shows the security type – Disable, WEP , WP A/WP A2, W AP-PSK/W AP2-PSK or 802.1X Authentication Displays the authentication mode. TCP/IP S tatus IP Address Displays the computer's IP address.
21 Connecting to a different network Hold your mouse pointer ov er the network icon, and click the right mouse button to select the network. Click the Connect button to connect the available network. If no configuration p rofile exists for that network, the Profile Settings window opens to ask to create a p rofile for the network.
22 Scan Available Networks Click the Browse button on the Profile Settings scr een to scan for available inf rastructure and ad hoc networks. On this list, click Refresh to refresh the list at any time. To configure a profile for Ad-Hoc or Infrastructure mode, select the Network Typ e field on the Profile Settings.
23 Click Next to continue. To define the security mode, select the desi red se curity mode from the drop down list. And then click Next to continue. Please see following table for details of security mode s.
24 Protocol) authenticates wireless LAN client s using only server -side digital certificates by creating an encr ypted SSL /TLS tunnel between the client an d the authentication server . T he tunnel then protects the subsequent us er authentication e xchange.
25 Advanced Settings After Security Settings are finished, the Advanced Settings screen will be shown as following. SMC recommends usin g the default values. The following table describes the item s found on the Advanced Se ttings screen. Power Save Mode Shows the power save mode.
26 After advance settings are finished, the following scre en is displayed as below. You can activate the profile now or later. WPS Wi-Fi Protected Setup (WPS) is based on pu sh-butto n or PIN (Personal Ident ification Number) entry authentication to provide strong WPA/WPA2 encryption key s to client dev ices.
27 4. After WPS detects security setti ng you will be prompted to save them to a new profile as shown below. Click Save to save settings 5. After clicking save the following will be displ a yed to confirm WPS is connected successfully. Note: If WPS fails, click the PBC bu tton few more times to try again.
28 WPS Setup - PIN Configuration The WPS PIN (Personal Identification Number) setu p is optional to the WPS button setup. It is more secure than using the WPS button.
29 Note: You may have to click PIN for few more times to try again. If you still cannot connect to an access point this way, please make sure the PIN co de you provided to acce ss point is correct.
30 Chapter 4 - Maintenance This chapter describes how to unins tall or upgrade th e Wireless Utility. Uninstall the Driver Follow the step s below to remove (or uninstall) the Card d river from your computer . Step 1. To remove the driver from the OS, go to Start -> Control Panel Step 2.
31 Glossary For unfamiliar terms used below , look for entries elsewhere in the glossary . A D -H OC (IBSS) Ad-hoc mode does not require an AP or a wired network. A network that transmits wireless from computer to computer without the use of a base station ( access point).
SSID The SSID (Service Set Identity) is a unique name shared among all wireless devices in a wire- less network. Wireless devices must have the same SSID to communicate with each other .
SMCWBR11-G SMCWPCI-N2.
An important point after buying a device SMC Networks SMCWPCI-N2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SMC Networks SMCWPCI-N2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SMC Networks SMCWPCI-N2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SMC Networks SMCWPCI-N2 you will learn all the available features of the product, as well as information on its operation. The information that you get SMC Networks SMCWPCI-N2 will certainly help you make a decision on the purchase.
If you already are a holder of SMC Networks SMCWPCI-N2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SMC Networks SMCWPCI-N2.
However, one of the most important roles played by the user manual is to help in solving problems with SMC Networks SMCWPCI-N2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SMC Networks SMCWPCI-N2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
