Instruction/ maintenance manual of the product 2102 SMC Networks
Go to page of 8
Model 2102 Gas Alarm Panel.
Model 2102 Gas Alarm Panel Instruction Manual Part Number: T10004 12/02 Rev. B APPLICABILITY & EFFECTIVITY This man ual provides instructions for the following Sierra Monitor products: Model Descr.
2102 Alarm Panel Table of Contents Table of Contents 1.0 Product Description ......................................................................................................................................... 1 1.1 Introduction .................
2102 Alarm Panel Page 1 2102 Alarm Panel 1.0 Product Description 1.1 Introduction The Model 2102 is a dual Channel Gas Alarm Panel housed in a NEMA 12, JIC type enclosure.
2102 Alarm Panel Page 2 2102 Alarm Panel 1.2 Configuration The Model 2102 is available with or without a built in audible alarm at the controller: Model 2102 - 00: Standard Controller. Model 2102 - 01: Controller with audible alarm annunciator (common to both gas monitors) installed in the enclosure door.
2102 Alarm Panel Page 3 2102 Alarm Panel Terminal 1: Normally open: Connects to Commons during alarm. Terminal 2: Common. Terminal 3: Normally connected to Common: Opens during alarm. Connect the 120 VAC power source to the large terminal strip marked “N” “G” “H” for Neutral, Ground, Hot.
2102 Alarm Panel Page 4 2102 Alarm Panel 3.0 Specifications Enclosure NEMA 3, JIC Type Operating Temperature +32 0 F to 113 0 F (0 0 C to +45 0 C) Input Power 120 VAC, 50 - 60 Hz 240 VAC available Fuse ¼ Ampere Size 8.3 x 8.3 x 4.4 in (HWD) (20.0 x 20.
2102 Alarm Panel Page 5 2102 Alarm Panel 4.0 Warranty SIERRA MONITOR CORPORATION warrants its products to be free from defects in workmanship or material under normal use and service fo r two years after date of shipment. SMC will repair or replace without charge any equipment found to be defec tive during the warranty period.
An important point after buying a device SMC Networks 2102 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SMC Networks 2102 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SMC Networks 2102 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SMC Networks 2102 you will learn all the available features of the product, as well as information on its operation. The information that you get SMC Networks 2102 will certainly help you make a decision on the purchase.
If you already are a holder of SMC Networks 2102, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SMC Networks 2102.
However, one of the most important roles played by the user manual is to help in solving problems with SMC Networks 2102. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SMC Networks 2102 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
