Instruction/ maintenance manual of the product 04H8095 Sirius Satellite Radio
Go to page of 36
Auto LANStreamer PCI Adapter 04H8095 Installation Guide.
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Server Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.
1 Connecting to a Netware 3.12 Server Windows for Workgroups C:WINDOWS ❒ NO ❒ IBM Auto LANStreamer PCI Adapter (use the driver on disk 3 of 5, Netware DOS requester Installation disk) 7 Highlight option 6 to continue with installation. 8 When prompted, insert the corresponding disks to complete file transfer and driver installation.
1 Connecting to Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.04. • Driver Name: Windows 95 Default • Novell Netware server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
1 Connecting to Netware 3.12 Server Windows 95 SR2 10 Insert disk 1 of 5 (Auto LANStreamer PCI Driver Diskette), set the path to “A:” and click “OK.” (If you have an HP preloaded HDD, set the path to “C:MASTERSLANLNSTRMDISK2”) 11 At the “Copying Files” window, click on “OK.
2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Server Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.
2 Connecting to a Netware 4.11 Server Windows for Workgroups ❒ NO ❒ IBM Auto LANStreamer PCI Adapter (use the driver on disk 3 of 5, Netware DOS requester Installation disk) 7 Highlight option 6 to continue with installation. 8 When prompted, insert the corresponding disks to complete file transfer and driver installation.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.04. • Driver Name: Windows 95 Default • Novell Netware 4.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 10 Insert disk 1of 5 (Auto LANStreamer PCI Driver Diskette), set the path to “A:” and click “OK.” (If you have an HP preloaded HDD, set the path to “C:MASTERSLANDRVLNSTRMDISK2”) 11 At the “Copying Files” window, click on “OK.
3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 3 Connecting to a Windows NT 3.51 Server Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.
3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 7 Click on “Drivers” then on “Add Adapter.” 8 With “Unlisted or Updated Network Adapter”, click on “OK.” 9 Insert disk 1 of 5 (Auto LANStreamer PCI Driver Diskette), set the path to “A:” and hit enter.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • IBM AUTO LANStreamer PCI card and drivers disk. • Driver Name for Vectra VL8 and VL7: W95setup.inf Size: 40KB Date: 9/ 17/96. • Driver Name for Vectra VE7/VE8: Streamer.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Click on “Finish.” 10 When prompted to insert the disk labeled “IBM Streamer Family Adapter Option Diskette”, click “OK.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 “C:MASTERSLANDRVLNSTRMDISK4WIN95”) 25 Click on “Yes” button to finish the setup installation and restart your computer.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • IBM AUTO LANStreamer PCI Drivers diskettes Ver. 3.04 • Driver Name for Vectra VL8 and VL7: OEMSETUP.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 9 In the “Windows NT Setup” enter the path to your NT files, and click on the “Continue” button.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 box..
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 Windows NT Workstation Version 4.0 Requirements • HP Vectra with Microsoft Windows NT Workstation 4.0 installed. • IBM AUTO LANStreamer PCI Drivers diskettes Ver. 3.04 • Driver Name for VL8 and VL7: OEMSETUP.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 9 With “Wired to the Network” checked, click on “Next.” 10 Click on “Select from List”, then click “Have Disk.” 11 Set the path to “A:NT” in the “Insert Disk” dialog box, and then insert the disk 4 of 5 , Auto LANStreamer PCI drivers disk.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 26 To complete the installation, remove the floppy disk, and click on “Yes” to restart your computer.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 Requirements • HP Vectra with Microsoft Windows NT Workstation 4.0 installed. • IBM AUTO LANStreamer PCI Drivers diskettes Ver.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 6 Click on “Start”, up to “Settings”, and open “Control Panel.” 7 Select the “Network” icon in the “Control Panel” program group. 8 Click on “YES” in the “Network Settings“ dialog box, and NT Networking will be installed on your computer.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 (If you do not have the required information, contact your network administrator) 25 Verify that “Networking has been installed on this computer” and click on “Finish.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • IBM AUTO LANStreamer PCI Drivers diskettes Ver. 1.04 • D r i v e r N a m e : O E M S E T U P .
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 10 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” dialog box, and click on “Continue” in the second “Network Adapter Card Detection” dialog box.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.01. • Driver Name for for VL8 and VL7: IBMMPC.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups D:MASTERSLANLNSTRMDISK2”) 10 Select “IBM Streamer Family Adapter” and click on “OK.” 11 Verify that “IBM Streamer Family Family Adapter [NDIS2]” is listed under “Network Drivers” and click on “Close.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • IBM AUTO LANStreamer PCI card and drivers disk. • Driver Name for VE7/VE8: Streamer.sys Size: 85KB Date:09/13/96. • Microsoft Windows NT Server 4.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Option Diskette”, click “OK.”Insert Disk 1 of 5 of IBM Auto LANStreamer drivers disks and set path to “A:” (If you have an HP pre-loaded HDD, set the path statement to “C: MASTERSLANDRVLNSTRMDISK1”).
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 computer..
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2.
.
V ersion Number Lans PCI Rev .1.
An important point after buying a device Sirius Satellite Radio 04H8095 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sirius Satellite Radio 04H8095 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sirius Satellite Radio 04H8095 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sirius Satellite Radio 04H8095 you will learn all the available features of the product, as well as information on its operation. The information that you get Sirius Satellite Radio 04H8095 will certainly help you make a decision on the purchase.
If you already are a holder of Sirius Satellite Radio 04H8095, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sirius Satellite Radio 04H8095.
However, one of the most important roles played by the user manual is to help in solving problems with Sirius Satellite Radio 04H8095. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sirius Satellite Radio 04H8095 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
