Instruction/ maintenance manual of the product axis communications dome network camera Axis Communications
Go to page of 62
USER MANUAL AXIS Q6035 PTZ Dome N etwork Camera.
About this document This manual is int ended for administra tors and users of AXIS Q6035 PTZ Dome Netw ork Camera, a nd is applicable t o fi rmware 5.41 and later. It includes instru ctions fo r using and managing the product on your network. Previous experience of networking will be of use when using this product.
AXIS Q60 35 PTZ Dome Netw ork Camer a T able of Content s H a r d w a r e O v e r v i e w ....... ................... ................ 5 C o n n e c t o r s ... .......... .......... .......... ............ ....... 5 L E DI n d i c a t o r s . .......
AXIS Q60 35 PTZ Dome Netw ork Camer a T able of Content s S y m p t o m s ,P o s s i b l eC a u s e sa n dR e m e d i a lA c t i o n s ............ ......... 5 2 Technical Speci fi c a t i o n s ...................................... 56 M u l t i - C o n n e c t o rC a b l e( s o l ds e p a r a t e l y ) .
AXIS Q60 35 PTZ Dome Netw ork Camer a H a rd w a re O v e r v i ew Hardware Overview 1 2 3 4 5 6 7 1 Part number (P/N) & Serial number (S/N) 2 Network connector (PoE+) 3 Multi-connector 4 SD card slot (SDHC) 5 Status LED indicator 6 Control button 7 Power button Connectors For technical sp eci fi cations, see page 56 .
AXIS Q60 35 PTZ Dome Netw ork Camer a H a rd w a re O v e r v i ew SD card slot - A standard or high-capacity SD card (not included) can be used for local recording with removable storage. NOTICE To prevent corruption of recordings, the SD card should be unmounted before removal.
AXIS Q60 35 PTZ Dome Netw ork Camer a A ccessing the P r oduct Accessing the Product To install the Axis product, refer to the Ins tallation Guide supplied with the product.
AXIS Q60 35 PTZ Dome Netw ork Camer a A ccessing the P r oduct Access from the Internet Once connected, the Axis product is accessible on your local net work (LAN). To access the product from the Internet you must con fi gure your network router to allow incoming data traf fi c to the product.
AXIS Q60 35 PTZ Dome Netw ork Camer a A ccessing the P r oduct Select the desired capture mode fro m the drop-down list and click OK . See also Capture Mode, o n page 18 . The Live View Page The controls and layout of the Live View page may have been customized to meet speci fi c installation requirements and user preferences.
AXIS Q60 35 PTZ Dome Netw ork Camer a A ccessing the P r oduct The Snapshot button takes a snapshot of the video image. The location where the image is saved can be speci fi ed in the AMC Control Panel. Click the View Full Screen button and the video image will fi ll the entire screen.
AXIS Q60 35 PTZ Dome Netw ork Camer a A ccessing the P r oduct Pan and Tilt bars – Use the arrows to pan and tilt the camera view, or click on a position on the bar to steer the camera view to that position. Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to zoom to that position.
AXIS Q60 35 PTZ Dome Netw ork Camer a Media Str eams Media Streams The Axis product provides several audio and video stream form ats. Your requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.
AXIS Q60 35 PTZ Dome Netw ork Camer a Media Str eams T h eA M CC o n t r o lP a n e lc a nb eu s e dt oc o n fi gure various video and audio settings. P l ease see the AXIS Media Control User’s Manual for more information. The AMC Control Pane l is automatically installed on fi rst use, a fter which it can be con fi gured.
AXIS Q60 35 PTZ Dome Netw ork Camer a Media Str eams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later. • QuickTime adds latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths a bove, although Axis do es not guarantee this.
AXIS Q60 35 PTZ Dome Netw ork Camer a Settin g Up the P r oduct Setting Up the Product The Axis product can be con fi gured by users w ith administrator or operator r ights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page.
AXIS Q60 35 PTZ Dome Netw ork Camer a Video and A udio Video and Audio The video and audio settings ca n be used to optimize video a nd audio quality. You can con fi gure the following: • Vide o stream settings. See page 16 . •S t r e a m p r o fi les.
AXIS Q60 35 PTZ Dome Netw ork Camer a Video and A udio Image The default image setting s can be con fi gured under Video & Audio > Video Stream .S e l e c t t h e Image tab. The following settings are available : • Resolution . Select the default resolution.
AXIS Q60 35 PTZ Dome Netw ork Camer a Video and A udio Camera Settings The Video & Audio > Camera Settings page provides access to advanced image settings for the Axis product. Capture Mode Capture mode de fi nes the maximum resolution and maximum frame rate ava ilable in the Axis prod uct.
AXIS Q60 35 PTZ Dome Netw ork Camer a Video and A udio Wide Dynamic Ra nge Wide dynamic range can imp rove the exposure when there is a considerabl e con trast between light and dark ar eas in the image. Enable WDR in intense backlight conditions. The different WDR se ttings adjust for various amounts of contrast in the image.
AXIS Q60 35 PTZ Dome Netw ork Camer a Video and A udio 2. To include an overlay image, select Include overlay image at the coordinates . The overlay image must fi rst be uploaded to the Axis product, see Overlay Image . 3. To include date and time, select Include date and Incl ude tim e .
AXIS Q60 35 PTZ Dome Netw ork Camer a Video and A udio Audio Settings The audio functionality for each video stream is enabled under Video & Audio > Video Stream > Audio . Note A multi-connector cable (available from Axis; Multi-Connector Cable (sold separately) ) is required when connecting external audio equipment to the Axis product.
AXIS Q60 35 PTZ Dome Netw ork Camer a Video and A udio • G726 Sample rate - The number of times per second the sound is sampled. A hig her sample rate w ill provide better audio quality, but also requires a g reater bandwidth. Bit rate - Set the required bit rate depending on the selected encoding.
AXIS Q60 35 PTZ Dome Netw ork Camer a Live V ie w Con fi g Live View Con fi g You can customize the Live View page and alter it to suit your requirements. It is possible to de fi ne the following features of t h eL i v eV i e wp a g e . •S t r e a m P r o fi le.
AXIS Q60 35 PTZ Dome Netw ork Camer a Live V ie w Con fi g Browser Viewer Description AMC Recommended viewer in Internet Explorer (H.264/M otion JPEG). QuickTime H.264. Java applet A slower imaging alter native to AMC (Motion JPE G). Requires one of the following installed on the client: • JVM (J2SE) 1.
AXIS Q60 35 PTZ Dome Netw ork Camer a Live V ie w Con fi g - Active/Inact ive displays two buttons, one or each action. To con fi g u r et h ea c t i v ea n di n a c t i v es t a t e s ,g ot o System Options > Ports & Devices > I/O Ports and set the port’s Normal state .
AXIS Q60 35 PTZ Dome Netw ork Camer a PTZ (P a n T ilt Zoom) PTZ (Pan Tilt Zoom) Preset Positions A preset position is a prede fi ned view that can be used to quickly steer the camera to a speci fi c location.
AXIS Q60 35 PTZ Dome Netw ork Camer a PTZ (P a n T ilt Zoom) the most movement will b e followed. Autotracking continues until the moving object stops or disap pears from the monitored area. Movement in areas blocked by pr ivacy masks and i n exclude areas does not trigger autotracking .
AXIS Q60 35 PTZ Dome Netw ork Camer a PTZ (P a n T ilt Zoom) 90° -90° -180°/180° 0° 90° -90° -180°/180° 0° A B B A 1 2 Top view A Pan limit start B Pan limi t end Gatekeeper The Gatekeeper monitors an area such as an entrance gate.
AXIS Q60 35 PTZ Dome Netw ork Camer a PTZ (P a n T ilt Zoom) For more information see the online help . Tour Recording The guard tour function in this product includes tour recording, which allows recording o f a custom tour using an input device such as a joystick, mouse, keyboard or through the VAP IX® Application Programming Interface (API).
AXIS Q60 35 PTZ Dome Netw ork Camer a PTZ (P a n T ilt Zoom) When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum pan/tilt movement speed, i.e. the speed the camera view move s at when the joystick is pus hed all the way out in any directio n.
AXIS Q60 35 PTZ Dome Netw ork Camer a Detector s Detectors Motion Detection Motion detection is used to generate an alarm when ever movement starts or stops in the camera view.
AXIS Q60 35 PTZ Dome Netw ork Camer a Detector s Motion Detection Parameters The parameters controlling motion dete ction are described in the table below: Parameter Object Size History Sensitivity Description Object size relative to window size. Object memory length.
AXIS Q60 35 PTZ Dome Netw ork Camer a Applications Applications Third party applications can be uploa ded to and installed on the Axis product. F or information about available applications, downloads, trials and licenses, go to www.
AXIS Q60 35 PTZ Dome Netw ork Camer a Ev e n t s Events The Axis product can be con fi gured to perfo rm actions when diffe rent events occur, for e xample, start a record ing when motion i s detected. The set of conditions that de fi nes how and when the action is triggered is called an Action Rule .
AXIS Q60 35 PTZ Dome Netw ork Camer a Ev e n t s Available actions include: • Output Port — activate an I/O port to control an external device. • Play Audio Clip —s e e Audio Clips, on page 22 . • PTZ Control - Autotracking — start autotracking, see Autotracking, on page 26 .
AXIS Q60 35 PTZ Dome Netw ork Camer a Ev e n t s To add additional criteria, se lect the Additional conditions option and add additional triggers. To prevent an action from being triggered repeatedly, a Wait at least time can be set.
AXIS Q60 35 PTZ Dome Netw ork Camer a Ev e n t s To use the schedule in an Action Rule, select the schedule from the Sch edule drop-down list in the Action Rule Setup page. Recurrences Recurrences are used to trigge r Action Rules repea tedly, for example e very 5 minutes or every ho ur.
AXIS Q60 35 PTZ Dome Netw ork Camer a Re c o rd i n g s Recordings T h eA x i sp r o d u c t c a nb ec o n fi gured to record video continuously or according to an action rule: • To start a c ontinuous recording, see page 38 . • To s et up action rules, see page 35 .
AXIS Q60 35 PTZ Dome Netw ork Camer a Re c o rd i n g s Note If a new stream pro fi le is selected while a recording is ongoing, the reco rding will be stopped and saved in the recording list and a new recording with the new stream pro fi le will star t.
AXIS Q60 35 PTZ Dome Netw ork Camer a System Options System Options Security Users User access control is enabled by default and can be con fi gured under System Options > Security > Users . An administrator can set up other users by givi ng them user names and passw ords.
AXIS Q60 35 PTZ Dome Netw ork Camer a System Options IEEE 802.1X IEEE 802.1X is a standard for port-based Network Admission Control p roviding secure authentication of wired and wireless network devices. IEEE 802.1X is based on EAP (Extensible Authentication Protocol).
AXIS Q60 35 PTZ Dome Netw ork Camer a System Options To change the date and time settings, select the preferred Time mode under New Server Time : • Synchronize with computer time sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.
AXIS Q60 35 PTZ Dome Netw ork Camer a System Options AXIS Video Hosting System (AVHS) AVHS used in conjunction with an AVHS service, provides easy and s ecure Internet access to live and recorded video accessible from any location. For more information and help to fi nd a local AVHS Service Provider go to www.
AXIS Q60 35 PTZ Dome Netw ork Camer a System Options Link-Local IPv4 Address Link-Local Address is enabled by defau lt and assigns the Axis product an additional I P address which can be used to access the product from other hosts on the same segment on the loca l network.
AXIS Q60 35 PTZ Dome Netw ork Camer a System Options Note This FTP server has nothing to do with the product’s ability to transfer images via FTP to othe r locations and servers. RTSP The RTSP server running in the Axis product allows a connecting client to start an H.
AXIS Q60 35 PTZ Dome Netw ork Camer a System Options The following traps are available: •C o l d s t a r t •W a r m s t a r t •L i n k u p • Authentication failed SNMP v3 provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required.
AXIS Q60 35 PTZ Dome Netw ork Camer a System Options 3. Click Format and select the desired fi le system. Note During formatting any previous data stored on the disk will be lost. Mounting is done automatically when the c ard is inserted or whe n the product is started.
AXIS Q60 35 PTZ Dome Netw ork Camer a System Options Port Status The list on the System Options > Ports & Devices > Port Status page shows the status of the product’s input and output ports. Note A multi-connector cable (available from Axis) is requ ired when connecting I/O devices to the Axis product.
AXIS Q60 35 PTZ Dome Netw ork Camer a System Options Server Report - Provides information abo ut the product status in a pop -up window. The A ccess Log is automatically included in the Server Report. Parameter List - Shows the product's parameters and their current setti ngs.
AXIS Q60 35 PTZ Dome Netw ork Camer a System Options 4. The process is now com plete, the prod uct has been reset to the factory default settings. The default IP address is 192.168.0.90 5. Re-assign the IP address. It is also possible to reset parameters to fa ctory default via the web interface.
AXIS Q60 35 PTZ Dome Netw ork Camer a T r oubleshootin g Troubleshooting Checking the Firmware Firmware is softwar e that determines the functionality o f network devices. One of your fi rst actions when troubleshooting a problem should be to check the curr ent fi rmware version.
AXIS Q60 35 PTZ Dome Netw ork Camer a T r oubleshootin g arp -s <IP address> <serial number> temp ping -s 408 <IP address> In Windows , type the following from a command/DOS prompt (.
AXIS Q60 35 PTZ Dome Netw ork Camer a T r oubleshootin g The IP address has been changed by DHCP If the product and the client are on the same network, run AXIS IP Utility to locate the pro duct. Identify the product using its model or serial number. Move the Axis product to an isolated network, or to one with no DHCP or BOOTP server.
AXIS Q60 35 PTZ Dome Netw ork Camer a T r oubleshootin g Why do I not get maximum frames per second? See Performance Considerations, on page 60 . Set a Capture Mode that prioritizes frame ra te. Changing the capture mode to prioritize frame ra te will lower the maximum resolution.
AXIS Q60 35 PTZ Dome Netw ork Camer a T r oubleshootin g Browser freezes Firefox can sometimes freeze on a slow computer Lower the image resolution Problems uploading fi les Limited space There is only limited space avail able for the upload of your own fi les.
AXIS Q60 35 PTZ Dome Netw ork Camer a T echnical Speci fi cations Technical Speci fi cations Function/group Item Speci fi cat ions Models AXIS Q6035 60 Hz AXIS Q6035 50 Hz Image sensor 1/2.8” Progressive scan CMOS Lens f4 . 7–9 4m m F 1 . 6–3 .
AXIS Q60 35 PTZ Dome Netw ork Camer a T echnical Speci fi cations Function/group Item Speci fi cat ions Security Password protection, IP address fi ltering, HTTPS encryption*, IEEE 802.
AXIS Q60 35 PTZ Dome Netw ork Camer a T echnical Speci fi cations Function/group Item Speci fi cat ions VCCI Class B C-tick AS/NZS CISPR 22 KCC Class B EN/IEC 60950-1 IEC 60529 IP52 IEC 60721-4-3 Class 3K3, 3M3, EN/IEC 60068-2 Midspan: EN 60950-1, GS, UL, cUL, CE, VCCI, CB, KCC, UL-AR Weight Camera: 2.
AXIS Q60 35 PTZ Dome Netw ork Camer a T echnical Speci fi cations Function Pin Notes Speci fi cations GND 1 Ground 3.3 V DC Power 2 Can be used to power auxiliary equipment. Note: This pin can only be u sed as power out. Max load = 250 mA Digital input — Connect to GND to a ctivate, or leave fl oating (unconnected) to deactivate.
AXIS Q60 35 PTZ Dome Netw ork Camer a T echnical Speci fi cations Connection diagram: 3.3 V max 250 mA 1 2 A B A I/O con fi gured as input B I/O con fi gured as output I/O connector 1 2 3 4 5 6 DC .
AXIS Q60 35 PTZ Dome Netw ork Camer a T echnical Speci fi cations • Viewing on poorly performing client computers lower s perceived performance . Frame rate affected.
User Manual Ver. M1.8 AXIS Q6035 P TZ Dome Network C amera Date: June 2012 © Axis Communicati ons AB, 2011 - 2012 Part No. 46 631.
An important point after buying a device Axis Communications axis communications dome network camera (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axis Communications axis communications dome network camera yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axis Communications axis communications dome network camera - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axis Communications axis communications dome network camera you will learn all the available features of the product, as well as information on its operation. The information that you get Axis Communications axis communications dome network camera will certainly help you make a decision on the purchase.
If you already are a holder of Axis Communications axis communications dome network camera, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axis Communications axis communications dome network camera.
However, one of the most important roles played by the user manual is to help in solving problems with Axis Communications axis communications dome network camera. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axis Communications axis communications dome network camera along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
