Instruction/ maintenance manual of the product JU-NE0511-S1 Siig
Go to page of 12
1 USB 3.0 Gigabit E thernet Adapter Pro Quick Installation Guide 04-0879A Introduction The USB 3.0 Gigabit Ethernet Adapter Pro adds one 10/100/1000 Mbps Ethernet port to your USB enabled system. Features and Benefits • Compliant with USB 3.0 specification and backwards compatible with USB 2.
2 • Supports Wake-on-LAN and all USB 3.0 power saving modes • Supports IPv4/IPv6 pack Checksum Offload Engine (COE) to reduce CPU loading System Requirements • Desktop or notebook computer with an available USB port (USB 3.0 recommended) • Mac ® OS X 10.
3 Layout Figure 1: USB 3.0 Gigabit Ethernet Adapter Pro LED Indicators Two LEDs to monitor your network connection. • Connectivity LED (Green): On when network cable is connected • Activity LED (Orange): Blinking when network activity is detected USB 3.
4 Mac OS Installation Follow the instructions below to install the USB 3.0 Gigabit Ethernet Adapter Pro driver. Note: Do not connect the USB 3.0 Gigabit Ethernet Adapter Pro to your computer before instructed to do so. 1 . Insert the driver CD, then double click Drivers icon on desktop.
5 7. Wait for several minutes for driver installation. 8 . At Summary , click Restart to restart the computer. 9 . After rebooting, connect the USB 3.0 Gigabit Ethernet Adapter Pro into an available USB port (USB 3.0 is recommended) of your computer, then plug your network cable into the USB 3.
6 Figure 2 Green bullet before AX88179 USB 3.0 to Gigabit Ethernet means successful network connection; otherwise, it shows grey. Apply.
7 Uninstall the Driver on MAC OS 1 . Insert the driver CD. 2 . Double click the Drivers icon on desktop, select MAC folder, then double click AX88179_178A.dmg . 3. For Mac 10.6 / 10.7: At the prompted window, double click AX88179_178A_ Uninstall . For Mac 10.
8 Windows Installation Follow the steps below to install the driver. Note : Do not connect the USB 3.0 to Gigabit Ethernet Adapter Pro to your computer before instructed to do so. 1 . Insert the driver CD. Close the CD autoplay box if prompted. 2 . Click Windows key and R .
9 4 . At the InstallShield Wizard Complete, click Finish . 5 . Plug the USB 3.0 Gigabit Ethernet Adapter Pro into an available USB port (USB 3.0 is recommended) of your computer, then plug your network cable into the USB 3.0 Gigabit Ethernet Adapter Pro .
10 Blank Page.
11 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/ Notebook systems and external peripherals.
An important point after buying a device Siig JU-NE0511-S1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siig JU-NE0511-S1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siig JU-NE0511-S1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siig JU-NE0511-S1 you will learn all the available features of the product, as well as information on its operation. The information that you get Siig JU-NE0511-S1 will certainly help you make a decision on the purchase.
If you already are a holder of Siig JU-NE0511-S1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siig JU-NE0511-S1.
However, one of the most important roles played by the user manual is to help in solving problems with Siig JU-NE0511-S1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siig JU-NE0511-S1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
