Instruction/ maintenance manual of the product I/O Expander 2S SIIG
Go to page of 12
1 CyberPro PCI 2S Quick Installation Guide 04-0342C Introducing the CyberPro PCI 2S The CyberPro PCI 2S high-speed serial I/O card provides two additional 9-pin serial ports. Depending on the model purchased, this board will fit into either a Full or Low Profile chassis.
2 Package Contents • CyberPro PCI 2S board • 2-port fan-out cable • Low profile bracket (Dual Profile board only) • Driver CD • Quick installation guide Layout Figure 1. Layout * Note: Depending on the model purchased, the bracket size will be either Full or Low profile.
3 Fan-out Cable 25-pin connector 9-pin serial 9-pin serial Figure 2. Fan-out cable Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed.
4 5. Set JP1 and JP2 jumper settings to the desired voltage only if your serial device needs additional power from the serial port. However, most serial devices do not require additional power. For more information see Figure 1 on page 2 . The jumpers can be removed if power is not required.
5 Windows 98/98SE 1. At the Add New Hardware Wizard , click Next . 2. Select Search for the best driver for your device (Recommend) , then click Next . 3. Insert the driver CD, check Specify a location , uncheck the other boxes, type in D:9x, then click Next .
6 3 . Double click Multi-function adapters, SIIG CyberPro 2S PCI board and PCI Function should be displayed. Windows NT 4.0 1. From the desktop click Start, then Run . 2. Insert the driver CD, type in D:NT4Install_serial.exe, then click OK . (Change D: to match your CD-ROM drive letter) 3.
7 32-bit Windows XP/Server 2003 1. At the Found New Hardware Wizard, insert the driver CD. For XP w/SP1 or earlier/ Server 2003 : go to step #2. For XP w/SP2 or later/Server 2003 wSP1 or later : select No, not this time , click Next . 2 . Select Install the software automatically (Recommended , then click Next .
8 To Verify Windows 2000/XP/Server 2003 Installation 1. Right click My Computer , click Manage , then click Device Manager . 2. Click on the + (plus sign) in front of Ports (COM & LPT) , CyberSerial PCI 16Cxxx... should be displayed two times. 3 .
9 Changing COM Port Address Some serial devices need a specific COM port in order to work. If your serial device works properly, do not change this setting. Windows 95/98/98SE/ME 1. From the Device Manager window double click Ports (COM & LPT) , then double click the CyberSerial PCI serial port you want to change.
10 Blank Page.
11 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
CyberPro PCI 2S is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation.
An important point after buying a device SIIG I/O Expander 2S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG I/O Expander 2S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG I/O Expander 2S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG I/O Expander 2S you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG I/O Expander 2S will certainly help you make a decision on the purchase.
If you already are a holder of SIIG I/O Expander 2S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG I/O Expander 2S.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG I/O Expander 2S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG I/O Expander 2S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
