Instruction/ maintenance manual of the product CN-GP1021-S1 Siig
Go to page of 8
1 Dual Profile GigaLAN PCIe Quick Installation Guide 04-0466B I ntroducing the Dual Profile GigaLAN PCIe The Dual Profile GigaLAN PCIe adds Gigabit Ethernet to your system.
2 Package Contents • Dual Profile GigaLAN PCIe • Spare enhanced full height bracket • Driver CD • Quick Installation Guide Layout The model shown is with a low profile bracket installed. A full height bracket is included for full height systems.
3 Hardware Installation Note : For full-height systems, replace the currently mounted bracket with the included Full Height bracket. General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed.
4 Software Installation This section provides information on how to install the Dual Profile GigaLAN PCIe drivers. Windows 2000 1. Install the board, boot up Windows. 2. At the Found New Hardware Wizard , click Next . 3. Select Search for a suitable driver for my device (recommended) , then click Next .
5 Windows Vista™ Windows Vista operating system has built-in driver support for this controller. Just install the board and Vista will automatically detect and install the correct drivers for it. No driver installation is needed. Verify Windows Installation Windows 2000/XP/Server 2003 1.
6 Blank Page.
7 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
Dual Profile GigaLAN PCIe is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are either registered trademarks or trademark.
An important point after buying a device Siig CN-GP1021-S1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siig CN-GP1021-S1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siig CN-GP1021-S1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siig CN-GP1021-S1 you will learn all the available features of the product, as well as information on its operation. The information that you get Siig CN-GP1021-S1 will certainly help you make a decision on the purchase.
If you already are a holder of Siig CN-GP1021-S1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siig CN-GP1021-S1.
However, one of the most important roles played by the user manual is to help in solving problems with Siig CN-GP1021-S1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siig CN-GP1021-S1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
