Instruction/ maintenance manual of the product CN-GP1011-S3 Siig
Go to page of 8
1 Dual Profile GigaLAN PCI Quick Installation Guide 04-0323E I ntroducing the Dual Profile GigaLAN PCI The Dual Profile GigaLAN PCI adds Gigabit Ethernet to your system. This adapter supports 10/100/1000 Ethernet, eliminating network bottlenecks. Features and Benefits • Integrated 10/100/1000 transceiver • Supports PCI 2.
2 Board Layout The board shown is with a low profile bracket installed. For full height form factor systems, a full height bracket is included. RJ45 port 1000/ACT Figure 1. Dual Profile GigaLAN PCI LED Indicators Two LEDs to monitor your network connection are visitble through the slot bracket.
3 Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in your body by touching your computer case for a few seconds. Avoid any contact with internal parts and handle cards only by their external edges.
4 4. Insert the driver CD, check Specify a location , uncheck the other boxes, type X:PCIWin98SE, then click Next . (Change X: to match your CD-ROM drive) 5. Click Next , Finish , then click Yes to restart. Windows ME 1. Install the board and boot up Windows.
5 7. At the Input Network Address window, click OK . 8. At the Input Tx Early Threshold window, click OK . 9. At the Network window, click Close . 10. Input your TCP/IP address or select DHCP , then click OK . (Check with your system administrator for the correct settings) 11.
6 For XP SP2 or later/Server 2003 SP1 or later : Select No, not this time , then click Next . 3. Insert the driver CD, select Install the software automatically (Recommended) , then click Next . 4. Accept the selected driver, click Next , then click Finish .
7 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
Dual Profile GigaLAN PCI is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation.
An important point after buying a device Siig CN-GP1011-S3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siig CN-GP1011-S3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siig CN-GP1011-S3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siig CN-GP1011-S3 you will learn all the available features of the product, as well as information on its operation. The information that you get Siig CN-GP1011-S3 will certainly help you make a decision on the purchase.
If you already are a holder of Siig CN-GP1011-S3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siig CN-GP1011-S3.
However, one of the most important roles played by the user manual is to help in solving problems with Siig CN-GP1011-S3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siig CN-GP1011-S3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
