Instruction/ maintenance manual of the product CE-000012-S1 Siig
Go to page of 8
1 Introducing the HDMI 4-Port Switch The HDMI 4-Port Switch allows you to connect and switch up to four high-definition digital audio/video source devices through one High-Definition Multimedia Interface (HDMI) on your high-definition television.
2 Layout Figure 1. Front Panel Layout Figure 2. Rear Panel Layout Input Select Button HDMI In 1 Power Jack HDMI Out IR Receiver Device LED Power LED HDMI In 2 HDMI In 3 HDMI In 4.
3 Remote Control Figure 3. Remote Control On/Off Direct Input Select Next/Previous Input Select.
4 Installation 1. Connect the HDMI cable (not included) from the HDMI source device(s) into the HDMI inputs. 2. Connect the HDMI cable (not included) from your HDTV, monitor, projector or another HDMI receiving device into the HDMI Out port. 3. Plug the power adapter into the HDMI switch.
5 Operation Turn On/Off Remote Control • Press the On/Off button to power on or power off the switch Front Panel Input Select Button • Press to power on the switch.
6 Blank Page.
7 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
HDMI 4-Port Switch is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Other names used in this publication are for identification only and may be trademarks of their respective companies. April, 2008 Copyright ©2008 by SIIG, Inc.
An important point after buying a device Siig CE-000012-S1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siig CE-000012-S1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siig CE-000012-S1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siig CE-000012-S1 you will learn all the available features of the product, as well as information on its operation. The information that you get Siig CE-000012-S1 will certainly help you make a decision on the purchase.
If you already are a holder of Siig CE-000012-S1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siig CE-000012-S1.
However, one of the most important roles played by the user manual is to help in solving problems with Siig CE-000012-S1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siig CE-000012-S1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
