Instruction/ maintenance manual of the product VS0116 ATen
Go to page of 13
User Manual VS-0116 Read this guide thoroughly and follo w the installation and operat ion procedures carefully in order to preve nt any damage to the unit s and/or any devices that connect to them. This package con tains: 1 VS-01 16 16 Port Video S plitter with Audio 1 VGA/Audio Cable (1.
Note: This is an FCC Class A product. In a domestic environment th is product may caus e radio interfe rence in which case the user may be required to take adequate measures. This equipment has been tested and found to comp ly with the limit s for a Class A digit al device, pursuant to Part 15 of the FCC Rules.
- 3 - Over view The VS-01 16 16 Port Video S plitter with Audio duplicate s the video and audio signals from an inp ut source (i.e. a co mputer) and routes them to up to 16 out put devices (monitors, projectors, etc.). Furthermore, it can be ca scaded to additional A TEN video splitters to support thousands of monito rs.
- 4 - Fe at u r e s Supports up to 250 MHz bandwidth High resolution video—19 20x1440@60Hz Supports VGA, SVGA, XGA, SXGA, and Multisync video cards and moni tors Supports DDC, DDC2, .
- 5 - System Requirements A VGA, SVGA, XGA, SXGA, or Multisync monitor for each output port you will be using ca pable of the highest resolution that you will be using in the installati on. S peakers for each output port you will be using (optio nal).
- 6 - VS-0116 F ront V iew No. Description Function 1 Activity LED Lights to indicat e that the unit is in use. 2 Power LED Lights to indicate tha t the unit is receiving power .
- 7 - VS-0116 Re ar V iew * If you connect a DDC type monitor , all other monitors must be able to su pport the highest resolution that the DDC monitor can provide. No. Description Function 1 Cable T ie Slot Attach a cable tie here to fasten the cables.
- 8 - Hardware Inst alla tion Before y ou Begin Single St age Setting up the Video S plitter is simply a ma tter of plugging i n the cables. Refer to the installation diagram on the next page (the numbers in the diagram corresp ond to the numb ered steps) and do the following: 1.
- 9 - Single St age Inst allation Diagram: 1 2 5 3 4.
- 10 - Cascading T o provide video display to additional monitors, the VS-01 16 supports cascading up to 3 levels of vid eo splitters. Cascading addi tional Video S plitters involves the fol lowing six steps. Refer to the installation diagram on the next page (the numbers in the diagram corresp ond to the numb ered steps) and do the following: 1.
- 11 - Cascaded Inst allation Diagram: 1 2 4 5 3.
- 12 - Specifica tions Model VS-01 16 Connection Computer 1 Monitors 16 Connectors Input 1 x HDB-15 (male) 1 x 3.5mm Mini Stereo Jack (femal e) Output 16 x HDB-15 (female) 16 x 3.
- 13 - VGA Pin As signments Get ting Help If you need to contact A TEN technical supp ort with a problem, visit our w ebsite at www .aten.com . Pin Signal Pin Signa l Pin Signal 1 Red Video 6 Analog G.
An important point after buying a device ATen VS0116 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ATen VS0116 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ATen VS0116 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ATen VS0116 you will learn all the available features of the product, as well as information on its operation. The information that you get ATen VS0116 will certainly help you make a decision on the purchase.
If you already are a holder of ATen VS0116, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ATen VS0116.
However, one of the most important roles played by the user manual is to help in solving problems with ATen VS0116. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ATen VS0116 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
