Instruction/ maintenance manual of the product VS108 ATen
Go to page of 11
VS-104 / VS-108 USER MANUAL Video Splitter vs104-108.fm Page 1 Wednesday , June 11, 2008 10:4 4 AM.
FCC Information WARNING!!! This equip ment gener ates, uses , and can radiate r adio frequency energy and if not installed an d used in acco rdance with t he instruct ion manual, may caus e interfe rence to radio commun ications.
- 3 - VS-104 / VS-108 User Manual Pa c k a g e C o n t e n t s The VS-102 Video S plitter package contains the following items: 1 VS-104 or VS-108 Video Splitter 1 Power Adapter 1 User Manual* 1 Quick S t art Guide Check to make sure t hat all the components are present and that nothing got damaged in shipping.
- 4 - Over view The VS-104 / VS-108 Video S plitter is a boosting device to duplicate the video signal from one so urce to 4 (VS-104) or 8 (VS-108) outputs, and is ideal for any monitor using analog signals. The VS-104 and VS-108 also extend the transmission distance up to 210 feet making them excellent for public broadcast systems.
- 5 - Fe at u r e s One Video Input to 4/8 V ideo Outputs T ran smission Distance: 65m (210ft.) Suitable for SVGA, VGA and Multisync Monitors Daisy Chainable Power Saving Mode: Power LED F lashes to Indicate When Computer Is Off.
- 6 - F ront and Rear V iews Note: 1. This product is not suitable for CGA, EGA, or Monochrome type monitors using a digital video signal . 2. UL2919 rated cable is recommended for the best vid eo quality.
- 7 - Inst alla tion St an dalone Inst alla tion 1. Connect the video signal from the PC to the VIDEO IN port of the Video S plitter with a high density HD-15 cable. 2. Connect the VIDEO OUT ports of the Video S pli tter to the display monitors with high den sity HD-15 cables.
- 8 - Inst alla tion Diagra m vs104-108.fm Page 8 Wednesday , June 11, 2008 10:4 4 AM.
- 9 - Specifica tions Function VS-104 VS-108 Connectors Input 1 High Density HD-15 M Output 4 High Density HD-15 F 8 High Density HD-15 F VGA Bandwidt h (-3db) 250 MHz 200 MHz VGA Res/V ert Freq. 1920 x 1440 @60 Hz 1600 x 1200 @60 Hz Power Consumption DC 9V , 180mA (max.
- 10 - HD-15 Pin As signments Vi d e o I n Vi d e o O u t Pin Assignment Pin Assignment 1 Red video input 9 No pin 2 Green video input 10 Logic ground 3 Blue video input 1 1 ID bit 4 Ground 12 Serial dat a line (SDA) 5 Ground 13 H.
- 11 - Limited W arr anty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM TH E DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION.
An important point after buying a device ATen VS108 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ATen VS108 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ATen VS108 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ATen VS108 you will learn all the available features of the product, as well as information on its operation. The information that you get ATen VS108 will certainly help you make a decision on the purchase.
If you already are a holder of ATen VS108, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ATen VS108.
However, one of the most important roles played by the user manual is to help in solving problems with ATen VS108. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ATen VS108 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
