Instruction/ maintenance manual of the product 25734 Axis Communications
Go to page of 14
Before attempting to connect or operate this product, please read these instructions completely. Product Instructions 25734 81-IN6215 06/01/07 C OMMUNICATIONS.
- 2 - ! ! SAFETY PRECAUTIONS IMPORT ANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read befor e the unit is operated. 2. Retain Instructions - The safety and operating instructions should be retained for futur e refer ence.
- 3 - ! ! ELECTRICAL SPECIFICATIONS (OUTDOOR ONLY): NOTE: This unit is designed for operation in an upright position. Installing the unit upside down may cause damage to the internal equipment, and will void the warranty.
- 4 - 2. In the kit there are (8) aluminum spacers - (4) 1" and (4) ½". Thread (2) spacers - (1) 1" and (1) ½" - on top of each of the (4) 2" spacers that are already located on the base bracket inside the housing. 3. Then start (3) 8-32x3/8” phillips head screws onto the 3½ inch spacers inside the housing.
- 5 - Connect the power plug and the ethernet cable to the back of the camera. CAMERA POWER +12 VDC -12 VDC Power Connection - Reference Only CONTROL RJ45 Ethernet Connector ALARMS 1 Alarm 1 Blue 2 Alarm 2 Violet 3 Alarm 3 Gray 4 Common White Installing Axis 213 Camera ( cont.
- 6 - Attach cameras using these (3) holes Installing Axis 214 Camera 1. Install the AXIS 214 camera to the 2685 mounting plate using the (3) 3mm x 12mm bolt and lock washers provided. 2. The AXIS 214 camera requires 1” of spacing for optimal position within the housing.
- 7 - Installing Axis 231D/232D Camera 1. Install the camera onto the quick release bracket. Loosen one of the screws on the bottom of the camera, see diagram below. 2. Place quick release bracket onto the bottom of the camera, making sure that the (3) locking buttons line up with the keyhole slots in the Q/R bracket.
- 8 - Wiring Connections CONTROL RJ45 Ethernet Connector ALARMS 1 Alarm 1 Blue 2 Alarm 2 Violet 3 Alarm 3 Gray 4 Common White POWER 1 Camera Power (24V AC) Red 2 Camera Power (24V AC) Orange Installing Axis 231D/232D Camera ( cont. ) 7. Then start (3) 8-32x3/8” phillips head screws onto the (3) ½" spacers inside the housing.
- 9 - 12. Now grab the camera assembly and connector the RJ45 cable and the input cable to the camera. Open screw slots Installing Axis 231D/232D Camera ( cont. ) 13. Attach the camera assembly to the housing by sliding the (3) open screw slots over the screws in the housing.
- 10 - Installing Axis 233 Camera 1. Note the position of the mounting holes on the camera bracket (see diagram below). 5. Now attach (4) 1” spacers (located in the packet that came with the housing) to the base bracket. 2. Since the 233 camera operates on 24vac, the power board that is located inside the housing is not needed.
- 11 - Installing Axis 233 Camera ( cont. ) 8. Turn the camera counter-clockwise . 9. When the locking buttons hit the end of the keyhole slots, tighten the locking screw. 7. Place the Quick Release plate onto the bottom of the camera, Make sure that the locking screws on the AXIS 233 camera line up with the keyhole slots on the Q/R plate.
- 12 - Chart A Wiring Color Code Power and Control Inputs (Outside of housing) CONTROL RJ45 Ethernet Connector Separate Power Supplies for Camera and Accessory Power Camera: 25 watts (V A), 24 V AC, C.
- 13 - The unit is setup with (2) individual power inputs. 1. Accessory Power (yellow and green wire) 2. Camera Power (red and orange) If you wish to provide a single power transformer it is recommended that: 1.
- 14 - Part Number Description 1 RPFD7015 Lower T rim Ring 2 FD7T T inted Replacement Capsule FD7C Clear Replacement Capsule 3 RPFD703 Dome Clamping Bracket 4 RPFD072 24 V ac Heater 5 RPFD080 (12 Vdc).
An important point after buying a device Axis Communications 25734 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axis Communications 25734 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axis Communications 25734 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axis Communications 25734 you will learn all the available features of the product, as well as information on its operation. The information that you get Axis Communications 25734 will certainly help you make a decision on the purchase.
If you already are a holder of Axis Communications 25734, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axis Communications 25734.
However, one of the most important roles played by the user manual is to help in solving problems with Axis Communications 25734. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axis Communications 25734 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
