Instruction/ maintenance manual of the product BC-16 Siemens
Go to page of 2
ENGLISH 1 BC -16 R e ader Ins ta ll ation Not e 81 733-2 06-20 EN Genera l The BC -16 is a Magnetic Stripe Card-only R eader for u se w ith B ewator Entro and Entro Lit e Door Contr ollers. The BC -16 can be mounted externally or internally , if mounted ext ernally the use of the SH-2 Rain Hood is advised.
ENGLISH 2 C onnecting the BC -16 to DC -12 and DC -22 Entro Door C ontr oller s - or the DC800 Entr o Lit e Door C ontr oller Note! For Entro : connect to the Cloc k & Data t erminal block. Set the link J4 in the door c ontroll er to +V = Vin, but NEVER exc eed 12V a s power sup ply .
An important point after buying a device Siemens BC-16 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siemens BC-16 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siemens BC-16 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siemens BC-16 you will learn all the available features of the product, as well as information on its operation. The information that you get Siemens BC-16 will certainly help you make a decision on the purchase.
If you already are a holder of Siemens BC-16, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siemens BC-16.
However, one of the most important roles played by the user manual is to help in solving problems with Siemens BC-16. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siemens BC-16 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
