Instruction/ maintenance manual of the product EV-1626-NWGQ 6~50mm SECO-LARM USA
Go to page of 16
NVD Bullet Cameras On -Screen Display Manual Note: Products with model numbers that end with “Q” or th at have a round green “Q” sticker ar e RoHS compliant.
On -Screen Display Manual 2 SECO- LARM U.S.A., Inc. Precautions: PLEASE READ THIS MANUA L THOROUGHLY B EFORE USING TH E CAMERA TO BECOME FAMI LIAR WITH THE CORRECT OPE RATIONAL PRO CEDURES. Do not open the camera body or touch any electrical parts.
On -Screen Display Manua l 3 SECO- LARM U.S.A., Inc. 10 10 11 15 15 15 16 Day/Night ................................................... 3DNR ........................................................ Special .............................................
On -Screen Display Manual 4 SECO- LARM U.S.A., Inc. Menu Diagram: SETUP MENU SETTINGS SETTING OPTIONS 1) LENS DC/MANUAL Range: 0~100 Level Adj ustable 2) EXPOSURE SHUTTER (seconds) FLK, 1/60, 1/250, 1.
On -Screen Display Manua l 5 SECO- LARM U.S.A., Inc. Special Menu Dia gram: SPECIAL MENU DEFAULT SETTINGS SETTING OPTIONS 1) CAMERA TITLE OFF ON / OFF 2) DIGITAL – EFFECT O FF FREEZE / MIRROR / D -ZOOM / GAMMA / NEG .
On -Screen Display Manual 6 SECO- LARM U.S.A., Inc. Lens: This function controls the br ightness of the image. 1. Move the arrow indicator to LENS using the UP and DOW N buttons on the SETUP menu scree n. 2. Select the desired lens type by pressing the LEFT a nd RIGHT buttons.
On -Screen Display Manua l 7 SECO- LARM U.S.A., Inc. AGC (AUTOMATIC GAIN CONTROL) : A higher gain increases brightness, but also in creases any noise. A. OF F: Deactivates the AGC function. B. LOW: Sets aut omatic gain control to LO W. C. MIDDLE: Sets automatic gain control to MIDDLE.
On -Screen Display Manual 8 SECO- LARM U.S.A., Inc. BLC OFF BLC ON C. Select a mode using the LEFT an d RIGHT buttons, then press the SET button. Select BLC to adjust the des ired BLC area and GAIN level. GAIN: Adjust the BLC sens itivity. DEFAULT: Go back to factory set ting.
On -Screen Display Manua l 9 SECO- LARM U.S.A., Inc. D-WDR (Digital Wide Dynam ic Range) : A. Select D- WDR using the UP and DOWN buttons on the EXPOSUR E menu screen. B. Select the desire d feature by using the LEFT and RIGHT buttons. D-WDR : When there ar e both bright and dark image area s, D-WDR makes both of them distinct.
On -Screen Display Manual 10 SECO- LARM U.S.A., Inc. Day / Night: 1. Select DAY / NIGHT using the UP and DOWN buttons on the S ETUP menu screen. 2. Select the desired mode using th e LEFT and RIGHT buttons. A. DELAY: Set the delay before swit ching to NIGHT mode.
On -Screen Display Manua l 11 SECO- LARM U.S.A., Inc. Special: 1. Select SPECIAL by using the UP and DOWN buttons. 2. Select one of the modes by u sing the UP and DOWN buttons. CAM TITLE : When input, the Camera ID is displayed on the monitor. A. Move th e arrow indicator to CAMERA ID using the U P and DOWN buttons on the S ETUP menu screen.
On -Screen Display Manual 12 SECO- LARM U.S.A., Inc. E. To select the camera title position on screen, move the cursor to POS and p ress the SET button. F. Created camera title is displayed. G. Select a new position by using the four directional button s.
On -Screen Display Manua l 13 SECO- LARM U.S.A., Inc. MIRROR OFF MIRROR ON C. D-ZOOM: Digital zoom available. (1x~32x) PAN: -100~100 adjustable r ange. TILT: -100~ 100 adjustable range. D. GAMMA: 0.05~1.00 adjustable r ange. E. NEG. IM AGE: ON: Activates negative image.
On -Screen Display Manual 14 SECO- LARM U.S.A., Inc. PRIVACY : Hides desire d on-screen area. RETURN: Select RETU RN to save the changes in the E XPOSURE menu and return t o the SETUP menu. A. Set up the a rea mode using the four directional buttons.
On -Screen Display Manua l 15 SECO- LARM U.S.A., Inc. Adjust: 1. When the SETUP menu scr een is displayed, select ADJUST using the UP and DOWN buttons. 2. Select the desired mode by us ing the UP and DOWN button s. SHARPNESS: Improves im age clarity.
On -Screen Display Manual 16 SECO- LARM U.S.A., Inc. IMPORTANT Users and in stallers of this product are re sponsible f or ensuring t his product co mplies with all national, state, and loc al l aws and statutes relat ed to moni toring and recor d ing audio and vi deo signals.
An important point after buying a device SECO-LARM USA EV-1626-NWGQ 6~50mm (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SECO-LARM USA EV-1626-NWGQ 6~50mm yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SECO-LARM USA EV-1626-NWGQ 6~50mm - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SECO-LARM USA EV-1626-NWGQ 6~50mm you will learn all the available features of the product, as well as information on its operation. The information that you get SECO-LARM USA EV-1626-NWGQ 6~50mm will certainly help you make a decision on the purchase.
If you already are a holder of SECO-LARM USA EV-1626-NWGQ 6~50mm, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SECO-LARM USA EV-1626-NWGQ 6~50mm.
However, one of the most important roles played by the user manual is to help in solving problems with SECO-LARM USA EV-1626-NWGQ 6~50mm. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SECO-LARM USA EV-1626-NWGQ 6~50mm along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
