Instruction/ maintenance manual of the product NTEX04911.0 Sears
Go to page of 28
Serial Number Decal CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Keep this manual for future reference. Model No.
2 T ABLE OF CONTENTS W ARNING DECAL PLACEMENT W ARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . .
3 W ARNING: T o reduce the risk of serious injury , read all important precautions and instructions in this manual and all warnings on your exercise bike before using your exercise bike. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
4 Seat Accessory T ray Seat Handlebar Handlebar Heart Rate Monitor Pedal/Strap Wheel Leveling Foot Console Backrest Adjustment Handle Handle Thank you for selecting the revolutionary NORDICTRACK ® GX 5.
5 M8 Locknut (86)–2 M6 W asher (88)–8 M4 x 16mm Screw (77)–7 M8 x 16mm Screw (69)–8 M8 x 65mm Button Bolt (70)–2 M6 x 38mm Screw (25)–8 M6 x 18mm Screw (75)–2 M10 x 105mm Bolt (65)–4 M.
6 • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you fi nish assembly .
7 3 3. Orient the Seat Frame (52) as shown. Attach the Seat Frame (52) to the Seat Carriage (41) with four M8 x 16mm Screws (69). 52 69 41 4. Tip: A void damaging the wires inside the Seat Handlebar (1 1) during this step. Attach the Seat Handlebar (1 1) to the Seat Frame (52) with two M8 x 65mm Button Bolts (70) and two M8 Locknuts (86).
8 5 5. Plug the Seat Pulse Wire (10) into the receptacle in the Right Rear Shield (97). 97 10 6. Attach the Seat (9) to the Seat Frame (52) with four M6 x 38mm Screws (25) and four M6 Washers (88).
9 8 7 103 75 7. Attach the Backrest (8) to the Seat Frame (52) with four M6 x 38mm Screws (25) and four M6 W ashers (88). 8. Attach the Backrest Cover (103) to the Backrest (8) with two M6 x 18mm Screws (75).
10 9 44 40 42 43 2 10 Wire T ies Wire T ies 1 9. Orient the Upright (2) and the T op Shield (44) as shown. Slide the T op Shield upward onto the Upright. Have a second person hold the Upright (2) and the T op Shield (44) near the Frame (1) until step 10.
11 11 12 13 1 1. Identify the Right Handlebar (20), which is marked with a “Right” sticker , and orient it as shown. Attach the Right Handlebar (20) to the Upright (2) with two M8 x 16mm Screws (69). Attach the Left Handlebar (7) in the same way .
12 14 15 16 14. Identify and orient the Front Upright Cover (58) as shown. Attach the Front Upright Cover (58) to the Upright (2) with two M4 x 16mm Screws (77). 16. Plug the Power Adapter (51) into the receptacle on the frame of the exercise bike. T o plug the Power Adapter (51) into an outlet, see HOW T O PLUG IN THE POWER ADAPTER on page 14.
13 HOW TO PUT ON THE HEART RA TE MONITOR The heart rate monitor has two components: a chest strap and a sensor unit (see the drawing below). Insert the tab on one end of the chest strap into one end of the sensor unit, as shown in the inset drawing. Press the end of the sensor unit under the buckle on the chest strap.
14 HOW TO PLUG IN THE POWER ADAPTER IMPORT ANT : If the exercise bike has been exposed to cold temperatures, allow it to warm to room temperature before plugging in the power adapter . If you do not do this, you may damage the console displays or other electronic components.
15 CONSOLE DIAGRAM FEA TURES OF THE CONSOLE The advanced console offers an array of features designed to make your workouts more effective and enjoyable. When you use the manual mode of the console, you can change the resistance of the pedals with the touch of a button.
16 HOW TO USE THE MANUAL MODE 1. Begin pedaling or press any button on the console to turn on the console. When you turn on the console, the display will light. The console will then be ready for use. 2. Select the manual mode. Press the Manual Control button on the console to select the manual mode.
17 Press the Home button to return to the default menu (see HOW T O CHANGE CONSOLE SETTINGS on page 20 to set the default menu). If necessary , press the Home button again. When a wireless iFit Live module is connected, the wire- less symbol at the top of the display will show the strength of your wireless signal.
18 HOW TO USE AN ONBOARD WORKOUT 1. Begin pedaling or press any button on the console to turn on the console. When you turn on the console, the display will light.
19 HOW TO USE AN IFIT LIVE WORKOUT 1. Begin pedaling or press any button on the console to turn on the console. When you turn on the console, the display will light. The console will then be ready for use. 2. Insert the iFit Live module into the console.
20 HOW TO CHANGE CONSOLE SETTINGS The console features a user mode that allows you to view usage information, select a unit of measurement, and adjust the contrast level of the display .
21 Inspect and tighten all parts of the exercise bike regu- larly . Replace any worn parts immediately . T o clean the exercise bike, use a damp cloth and a small amount of mild soap. IMPORT ANT : T o avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight.
22 HOW TO ADJUST THE DRIVE BEL T If the pedals slip while you are pedaling, even while the resistance is adjusted to the highest setting, the drive belt may need to be adjusted. T o adjust the drive belt, first unplug the power adapter . Then, you must remove the top shield, the right pedal, and the right shield (see the instructions below).
23 EXERCISE GUIDELINES These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember , proper nutrition and adequate rest are essential for successful results.
24 1 1 Frame 2 1 Upright 3 2 Front Stabilizer Cover 4 1 Console 5 1 Rail 6 1 Adjustment Bar 7 1 Left Handlebar 8 1 Backrest 9 1 Seat 10 1 Seat Pulse Wire/Pulse Grip Set 11 1 Seat Handlebar 12 1 Brake .
25 Note: Speci fi cations are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *These parts are not illustrated.
26 2 4 20 49 69 69 67 67 77 77 77 77 77 77 58 57 100 100 100 8 9 10 10 10 11 7 25 25 49 56 69 70 70 25 25 88 88 75 75 77 77 77 77 77 77 77 77 77 88 88 69 52 97 98 99 99 103 86 104 105 EXPLODED DRA WING A Model No.
27 1 5 6 12 13 14 15 16 17 17 19 19 21 22 23 24 27 26 29 30 30 31 33 95 28 33 34 35 36 37 38 39 41 42 43 45 46 47 3 3 48 48 50 50 51 53 55 55 55 55 59 89 74 59 55 89 59 59 59 74 18 55 89 59 74 74 64 8.
ORDERING REPLACEMENT P ARTS T o order replacement parts, please see the front cover of this manual. T o help us assist you, be prepared to provide the following information when contacting us: • the.
An important point after buying a device Sears NTEX04911.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sears NTEX04911.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sears NTEX04911.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sears NTEX04911.0 you will learn all the available features of the product, as well as information on its operation. The information that you get Sears NTEX04911.0 will certainly help you make a decision on the purchase.
If you already are a holder of Sears NTEX04911.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sears NTEX04911.0.
However, one of the most important roles played by the user manual is to help in solving problems with Sears NTEX04911.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sears NTEX04911.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
