Instruction/ maintenance manual of the product VCC-3912 Sanyo
Go to page of 16
INSTRUCTION MANUAL COLOR CCD Camera VCC-3912 L53L 2/US G B 1995 , 11, 1.
1AC6P1P0866-- L53L2/US (1095SY) 21350 Lassen Street, Chatsworth, CA 91311 Printed in Japan SANYO INDUSTRIAL VIDEO COLOR VIDEO CAMERA LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, t.
CONTENTS ACCESSORIES .................................................... 1 INFORMATION TO USER .................................. 2 FEATURES .......................................................... 3 PRECAUTIONS ....................................
Safety Guard THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT. WARNING: TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK , DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
FEATURES Electronic iris function The electronic iris function regulates the electronic shutter speed. To the contrary of electronic shutters with a fixed speed, the electronic iris modifies the shutter speed according to the CCD input.
PRECAUTIONS In case of problem Do not use the camera if smoke or a strange odor comes from the unit, or if it seems not to function correctly. Disconnect the power cord immediately, and consult your dealer (or a Sanyo Authorized Service Center). Do not open or modify Do not open the cabinet, as it may be dangerous and cause damage to the unit.
PREPARATION Camera installation A: Lens mount cap Remove the lens mount cap before installing the lens (sold separately). • Use with t his cam era a CS m ount type auto-iris lens (for 1/3 inc h) . Auto- iris len ses regu late the amount of light entering the camera according to the brig htness of the su bject.
Installation of a DC type lens (sold separately) 1/3 inch CS mount type (Flange-back: 12.5 mm) 1 Remove the lens mount cap. 2 Install the auto-iris lens onto the camera. Sanyo auto-iris lenses (sold separately) • VCL-C S8LY: S tandard angle, f = 8 mm • VC L-CS4LY: Wide angle, f = 4 m m • VCL-CS 2LY: Ultra- wide angle, f= 2.
PREPARATION Installation of a VIDEO type lens (sold separately) 1/2 or 2/3 inch C mount type (Flange-back: 17.526 mm) 1 Remove the lens mount cap. 2 Attach the supplied C mount adaptor to the auto-iris lens. 3 Install the auto-iris lens onto the camera.
CONNECTIONS Basic connection for monitoring or recording The peripheral devices (VCR, monitor, etc.) and cables are sold separately. 1 Make the video signal connection between the camera and the monitor or time lapse VCR. 2 Connect DC connecting cord from the AC adaptor to the 12V DC IN terminal on the camera.
CONNECTIONS Multiple camera connections The following two connections can be used when using 4 monitoring cameras. The power connection is as described on page 8, and should be realized for each camera. The peripheral devices (VCR, monitor, multi-video processor, camera switcher, etc.
SETTINGS The switches setting illustrated are the factory default settings. A: Flange-back adjustment If the pick-up surface is not correctly positioned with relation to the lens focal point, the picture will be out of focus (in particular when using auto-iris power zoom lenses, sold separately).
SETTINGS C: White balance adjustment Normally the WB (white balance) switch is set to the A (automatic) position and the white balance is adjusted automatically. If a manual white balance adjustment is necessary, follow the steps below. Set the WB switch to the M (manual) position, then adjust the color.
If using a VIDEO type auto-iris lens • The ALC volume on the lens should be turned all the way to Av (Average). • If the backlight compensation function does not compensate properly for the conditions, set using the LEVEL volume on the lens.
TROUBLESHOOTING Before taking the camera for repairs, please check below to make sure that the camera is used correctly. If it still does not perform correctly, please consult your dealer or a Sanyo Authorized Service Center.
SPECIFICATIONS Camera Color system : NTSC color TV system (525 TV lines, 60 fields/sec.) Interlace : PLL 2:1 interlace Image device : 1/3 inch interline transfer CCD Picture elements : 537 (H) x 505 (.
An important point after buying a device Sanyo VCC-3912 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo VCC-3912 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo VCC-3912 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo VCC-3912 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo VCC-3912 will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo VCC-3912, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo VCC-3912.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo VCC-3912. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo VCC-3912 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
