Instruction/ maintenance manual of the product SSC-17TQ Samsung
Go to page of 25
COLOR DUAL QUAD OBSER V A TION SYSTEM SSC-17TQ INST ALLA TION MANUAL POWER 00403A Cover_SSC-17TQ 10/9/03 11:31 AM Page 1.
e-3 e-2 CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
e-5 e-4 Chapter 3: Setting each item function at SETUP MENU 3-1) CLOCK/DISPLAY SET MENU function setting .............e-30 3-2) CHANNEL TITLE MENU function setting .....................e-31 3-3) SYSTEM SET MENU function setting .......................
e-7 e-6 1-2) System Components The system consists of the following: POWER LCD MONITOR DUAL QUAD BOX STANDARD CAMERA PIR CAMERA CAMERA BRACKET Screws (M3 x 6) Screws (M4 x 20) PLASTIC ANCHOR (HUD 5) S.
e-9 1-3) CAMERA composition and installation method 1) Standard Camera composition (SOD14C) a. Lens It has a focal length of 3.8mm and makes it possible for you to observe a relatively wide area. b. Microphone Capable of picking up all sound in the vicinity of the camera location and transmitting to the monitor.
e-11 e-10 f. Speaker It outputs the sound signal which was transfered from the monitor. • PIN configuration of the PIR CAMERA is the same as the STANDARD CAMERA.
e-13 e-12 ➃ 6-pin modular jack Used to connect the camera to the monitor. <Sensor Detection Angle & Area> 1> Vertical Detection Line 2> Horizontal Detection Area ⑤ 5-Pin Terminal B.
e-15 e-14 ➅ Function Switch A function switch for the PIR sensor operation. ⑦ PIR Sensor A thermal heat sensor that detects infrared radiation projected by warm objects. ⑧ Microphone Capable of picking up all sound in the vicinity of the camera location and transmitting to the monitor.
e-17 e-16 4. Connect the Camera connector(RJ-11) cable to the case-rear as well as the cable to be connected to the terminal. 5. Align the two holes of the case-rear to the holes of the plastic anchors, and then fasten the screw- tappings (BH M3 X 30).
e-19 e-18 4) CAMERA MOUNT BRACKET(SBR-110) & STANDARD CAMERA(SOD14C) (1) Overview CAMERA MOUNT BRACKET (SBR-110) is used to attach the camera to a wall, ceiling or shelf. (2) Installation Explains the installation of CAMERA MOUNT BRACKET as wall as the installation of the camera onto the CAMERA MOUNT BRACKET.
e-21 e-20 1-4) CAMERA Composition and Connecting Method to SYSTEM After positioning monitor and installing three cameras to a desired location, please connect CAMERA to SYSTEM through CAMERA CABLE (MCB-60 or MCB-100) as shown in the below figure. Please check whether or not it is properly connected.
f) Connect the A/O (HOT) terminal on the rear panel to the Alarm IN terminal of the VCR. g) Connect the A/O (COLD) terminal on the rear panel to the Ground terminal of the VCR. h) Connect the A/R terminal on the rear panel to the Alarm Reset terminal of the VCR.
e-25 1-8) Mounting the DIGIT AL DUAL QUAD (SOQ-080N) ACCESSORY Screws (TH M4X20, 4EA) Screws (BH M3X6, 4EA) Rack Mount Adapters (2EA) Screw (BH M3X6) Screw (BH M3X6) Rack Mount Adapter Rack Mount Adap.
e-27 e-26 2-4) SET - KEY Alarm function and loss function can be cancelled while the alarm or loss is working. 2-5) QUAD/P AGE- KEY Allows users to display QUAD A or QUAD B at QUAD DISPLAY MODE.
e-29 e-28 2-12) ENTER- KEY As a multi functional ENTER key, it is used for 1. entering from the menu into the submenu, 2. moving into the full screen of selected channel. 2-13) MENU- KEY Display the Setup menu on the screen. Press it again to exit the Setup menu.
e-31 e-30 DATE TYPE : MM/DD/YY ↔ YY/MM/DD ↔ DD/MM/YY. DATE [MM/DD/YY] • Month(MM) : 01 ~ 12 • Day(DD) : 01 ~ 31 • Year(YY) : 00(2000) ~ 99(2099) TIME [HH:MM:SS] • Hour(HH) : 00 ~ 23 • Minute(MM) : 00 ~ 59 • Second(SS) : 00 ~ 59 3-2) CHANNEL TITLE MENU function setting You may change CHANNEL TITLE.
e-33 e-32 PIP POSITION : BOTTOM-RIGHT ↔ TOP-LEFT ↔ TOP-RIGHT ↔ BOTTOM-LEFT. • Select the PIP position among the four options listed above. BORDER COLOR : GRAY ↔ WHITE ↔ BLACK.
e-35 e-34 EVENT DETECT... • Select “EVENT DETECT...” with the UP/DOWN button and click the ENTER button. Then the following screen pops up. • Use the UP/DOWN button to move to the item you want to set, and then use the ENTER and LEFT/RIGHT buttons to change the setting.
e-37 e-36 Chapter 4: DISPLA Y MODE setting method 4-1) SINGLE SCREEN DISPLA Y The initial display mode is QUAD A mode. Use the UP and DOWN buttons to select the channel you want to view on a single screen, and then press the ENTER button. The channel you selected will be displayed on a single screen.
e-39 e-38 4-3) AUTO SEQUENTIAL DISPLA Y MODE Pressing on the SEQUENCE KEY on the front allows screen to automatically switch to SINGLE MODE full screen or QUAD MODE.
e-41 e-40 08/01/03 12:30:00 08/01/03 12:30:00 CAM 2 08/01/03 12:30:00 CAM 2 08/01/03 12:30:00 CAM 2 4-5) ZOOM MODE DISPLA Y While in a single screen display, press the ZOOM key to display the zoom area. Use the LEFT, RIGHT, UP, and DOWN keys to move to the area you want to zoom in, and then press the ENTER key.
e-43 e-42 Model Name Broadcasting System Imaging Device Effective Pixels Synchronization Resolution Signal Output S/N Ratio Minimum Scene Illumination Gamma Correction Lens Auto Exposure PIR Sensor Au.
e-44 Memo Video Input Video Output Voice Input Voice Output Alarm/Motion Features: Connected to Alarm Box/Camera Sequence Event List Display mode Horizontal Resolution Operation Temperature Dimension (W x D x H (mm)) Weight Power consumption Video system Operation Humidity Range AC Input Ranges • CAMERA 8 Input: 1.
Memo 00403A SSC-17TQ_ENG 10/9/03 11:30 AM Page e-46.
Part No.: AB68-00403A (Rev.01) Printed in Korea Samsung CCTV dba GV1 1621 West Crosby, Suite 104 Carrollton, TX. 75006 PHONE : 866.492.8246 00403A Cover_SSC-17TQ 10/9/03 11:31 AM Page 2.
An important point after buying a device Samsung SSC-17TQ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SSC-17TQ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SSC-17TQ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SSC-17TQ you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SSC-17TQ will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SSC-17TQ, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SSC-17TQ.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SSC-17TQ. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SSC-17TQ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
