Instruction/ maintenance manual of the product SIR-4250 Samsung
Go to page of 22
Thank you for purchasing a SAMSUNG CCD CAMERA. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ENGLISH High Resolution D/N IR Dome Camera SIR-4250 User’ s Manual www.
Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description.
COLOR IR CAMERA User’s Manual 5 COLOR IR CAMERA User’s Manual 4 F eatures ■ Front ■ Back ■ Installation ■ Adjust the panning and tilting, rotating while watching the monitor ■ Adjusting .
Ultra High Sensitivity SSNR (Samsung Super Noise Reduction) By using built-in SSNR Chip manufactured by SAMSUNG TECHWIN, the amount of low illuminance noise has been significantly reduced, and the signal-to-noise ratio (S/N) as well as horizontal resolution have been improved, resulting in a clear and sharp image display even in the dark.
COLOR IR CAMERA COLOR IR CAMERA User’s Manual User’s Manual 9 8 Precautions Do not install under extreme temperature conditions. Use only under temperature conditions between -10˚C and +50˚C. Provide good ventilation when using in high temperature conditions.
COLOR IR CAMERA COLOR IR CAMERA User’s Manual User’s Manual 11 10 FRONT Components and Accessories Overview 1. High Resolution D/N IR Dome Camera SIR-4250 3.
COLOR IR CAMERA COLOR IR CAMERA User’s Manual User’s Manual 13 12 BACK Overview Function Button • SETUP button : Used for the menu display. Confirm the status of the selected function.
COLOR IR CAMERA COLOR IR CAMERA User’s Manual User’s Manual 15 14 Installation Installation 1) You can adjust camera to any direction by using Pan, Tilt, Rotate mechanism. • Pan Base moves by 170˚ to each side direction and 340˚ on the whole. • Tilt Base covers total 146˚ angle(73˚ to each side).
Installation COLOR IR CAMERA User’s Manual 17 COLOR IR CAMERA User’s Manual 16 • When adjusting the rotating angle, loosen rotate base holding screw as following Figure A. And then tighten it again. • When adjusting the tilting angle, just grip the tilt base and adjust tilting angle.
COLOR IR CAMERA COLOR IR CAMERA User’s Manual User’s Manual 19 18 Connecting to Monitor The recommended adaptor specification for SIR-4250N/P is DC 12V/4A. Please check the standard power requirement before connecting to power. • As shown in the table above, voltage decreases as the wire gets longer.
COLOR IR CAMERA User’s Manual 21 Using a RS-485 communication, it will be able to control the OSD menu at the SAMSUNG TECHWIN System Controller or DVR.
COLOR IR CAMERA User’s Manual 23 COLOR IR CAMERA User’s Manual 22 Operating Y our Camera Settings can be made using the RS-485 communication Please refer 20 pages (RS-485 communication control) and connect to the RS- 485 control terminal(TRX+, TRX-) Function setting uses 5 buttons within this product or RS-485 communication.
COLOR IR CAMERA User’s Manual 25 COLOR IR CAMERA User’s Manual 24 1. Please press the SETUP button. • Settings can now be made. The SETUP menu is displayed on the monitor. 2. Please select any function you wish to activate by using the UP and DOWN buttons.
COLOR IR CAMERA User’s Manual 27 COLOR IR CAMERA User’s Manual 26 Operating Y our Camera SHUTTER (condition and speed control) Because SIR-4250 uses built-in dc lens, shutter speed is fixed at 1/60 basically.
COLOR IR CAMERA User’s Manual 29 COLOR IR CAMERA User’s Manual 28 Operating Y our Camera When there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the BACKLIGHT function.
COLOR IR CAMERA User’s Manual 31 COLOR IR CAMERA User’s Manual 30 Operating Y our Camera The background noise in the low light level decreases automatically as the level of gain changes. 1. Please position the arrow to point to 'SSNR' on the SETUP menu by using the UP and DOWN buttons.
COLOR IR CAMERA User’s Manual 33 COLOR IR CAMERA User’s Manual 32 Operating Y our Camera SPECIAL 1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the UP or DOWN button.
COLOR IR CAMERA User’s Manual 35 COLOR IR CAMERA User’s Manual 34 Operating Y our Camera 5) When a name has been chosen, please select a position for the name display. Please move the cursor onto 'POS' and then press the SETUP button. The name will appear at the top left hand corner.
COLOR IR CAMERA User’s Manual 37 COLOR IR CAMERA User’s Manual 36 Operating Y our Camera • Please adjust the size of the area to be observed by using the UP, DOWN, LEFT or RIGHT button. • Please press the SETUP button to save the changes and complete the setting.
Operating Y our Camera T roubleshooting COLOR IR CAMERA User’s Manual 39 COLOR IR CAMERA User’s Manual 38 RESET : Returns to the level which was set by the manufacturer for shipment. RETURN : Returns to the SETUP menu. Saves all the setting menus and then exits.
Dimension Specifications COLOR IR CAMERA User’s Manual 41 COLOR IR CAMERA User’s Manual 40 POWER Sensor Total Pixels Effective Pixels Scanning System Synchronization Frequancy Resolution Video Output S/N (Y signal) Min.
COLOR IR CAMERA User’s Manual 42 DECLARATION OF CONFORMITY Application of Council Directive(s) 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO.
An important point after buying a device Samsung SIR-4250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SIR-4250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SIR-4250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SIR-4250 you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SIR-4250 will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SIR-4250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SIR-4250.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SIR-4250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SIR-4250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
