Instruction/ maintenance manual of the product SCC-ZM395P Samsung
Go to page of 34
Version 1.1 - 1 - www.samsungsecurity.com Color Camera Module SPECIFICATIONS MODEL SCC-ZM395 DATE Nov. 01. 2009 CUSTOMER APPROVED SUPPLIER CUSTOMER SAMSUNG ELECTRONICS Co .
Version 1.1 - 2 - Table of Contents - Revision History 1. Features --------------------------------------------- 4 2. Precautions ---------------------------------------- 5 3. Specifications Camera Module Spec. -------------------------------- 6 Spectral Response Spec.
Version 1.1 - 3 - - Revision History Date Version Description '09. 09. 13 '09. 10. 01 '09. 11. 01 0.1 1.0 1.1 Establishment ( for R&D sample) Mass Product ion Protocol changed and f.
Version 1.1 - 4 - 1. Features ■ 1/4" 410 K/470K Sony Ex-View-HAD Double Scan CCD P o w e rZ o o mO p t i c a l 39x (3.4~132.6 mm), Digital 12 x(0.
Version 1.1 - 5 - 2. Precautions ■ Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sen sor.
Version 1.1 - 6 - 3. Specifications 3-1. CAMERA Module Spec. Items Sub-items SCC-ZM395N SCC-ZM395P CCD Device SONY 1/4" ExView-HAD PS CCD ( ICX-448) SONY 1/4" ExView-HAD PS CCD ( ICX-449) Total 811 x 508 795 x 596 Effective 768 x 494 752 x 582 Sync.
Version 1.1 - 7 - 3-2. Spectral Response Spec. CCD ( ICX448AK/449AK).
Version 1.1 - 8 - 3-3. Hardware Spec. Rear View ① CN207 : I/O Connector-1 Pin NO Pin Name Description Normal Active I/O 1 RxD Read Data CMOS 5V ( Low : Max 0.
Version 1.1 - 9 - 3-4. Interface Circuit ① Video Amp Block ② Communication ( TXD/RXD) Block : TTL Level ③ Power I nput Block ④ Lpulse (External sync) Block DSP EXT_SYN 3.
Version 1.1 - 10 - 3-5. Reliability Zoom Lens ① Zoom Operation : more than 500,000 times Tele side Wide side 1sec 1 moving 5 moving 1 Cycle 5sec holding 2000step ↑ +1000step ↑ -1000step ↑ 960p.
Version 1.1 - 11 - 3-6. Dimension Front Left Side Rear Right Side Top Side Bottom Side Diagonal H : 20.9 mm Horizontal H : 18.9576mm Vertical H : 18.4620mm Lens Effective Angle.
Version 1.1 - 12 - 3-7. Packing Specifications (1 Carton =1 0 ea) MODEL NAME Zoom Module CARTON BOX LABEL CUSHION P ANEL (2 x 5) BAG CAP Test Report.
Version 1.1 - 13 - 4. Function 4-1. OSD MENU Stru cture MAIN MENU Description CAMERA SET Camera related functions an d data. INTELLIGE NCE Motion de tection, and more. PRIVACY ZONE Privacy related settings PRESET SET Preset position and Preset ID OTHER SET Configure for Factory Defaults, and more.
Version 1.1 - 14 - 4-2. Function ( OSD) □ USING ICONS IN THE MENU ◆ If these icons appe ar in the left and rig ht corner of a menu item, you can use the joystick to move to the previous or ne xt menu. ◆ ( EXIT) Exit the menu sett ing. Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel.
Version 1.1 - 15 - 4-2-1. CAMERA SETUP You can configure the ge neral setting s of the module. Select < MAIN MENU> → < CAMERA SET>. The Camera Setup menu appe ars. Change th e settings as necessary , or select an ite m to check. ● CAMERA ID The CAMERA ID menu is used for you to assign a unique name to a camera.
Version 1.1 - 16 - - WDR : If you set < BACKLIGHT> to < WDR>, you will see a menu where you can set th e WDR options. specify the shutter speed in WDR LEVEL, and the compositio n level in < WEIGHT>. Select OUTDOOR, or INDOOR in < WHITE BAL>.
Version 1.1 - 17 - ● DNR ( Digital Noise Reduction) Reduces the n oise on the scre en. This is espe cially useful f or a severely distor ted screen. You can set the level if you set DNR to USER. This module use the moti on adaptive DNR algorith m. This is mixed 2D & 3D method data depends on moti on.
Version 1.1 - 18 - - BURST : If set to < O F F > ,t h eb u r s ts i g n a lw i l ln o tb e output in NIGHT mode. - DAY → NIGHT BRIGHTNESS : Specif y the brig htness level switching from COLOR to BW filter. Adjus ting from HIGH t oL O Ww i l lc a u s et os w i t c ht h ef i l t e ri n a darker screen.
Version 1.1 - 19 - According to t he specified recor ding mode, select a< WHITE BAL> mode w ith necessary options. - ATW1,2 : The camera can automa tically adjust the c olor temperature in real time, according to the ambient conditions.
Version 1.1 - 20 - ● DETAIL Controls the ho rizontal or v ertical distinc tion. ● V-SYNC Select the vertical sync mode for INT or LINE. I fy o us e l e c tI N T ,t h ec a m e r aw i l lu s e the internal synchronization. If selecting LINE, th e camera will use the externa l power source frequen cy for the synchronizatio n.
Version 1.1 - 21 - ● MASK AREA S e l e c tt h en u m b e ro ft h ea r e at ob em a s k e dt h a tw i l lb e excluded from moti on detection. Select the mask number and s et the mask size and its coverage. ● DISPLAY : ON, OFF With the DISPLAY option set to ON, a motion function will be displayed on the screen, if detected.
Version 1.1 - 22 - ※ Setting one or more pri vacy zone and enablin g privacy function will disable the PIP functio n. For better p rivacy prot ection, make your privacy zo ne bigger than the r equired, bigger by about 30%. Video portion of mosaic pattern or colored by the privacy zone setu p is not recoverable.
Version 1.1 - 23 - 4-2-7. SYSTEM INFORMATION You can view the system informatio n including th e protocol, address, baud rate, serial number, camera version, and EEPROM version. 4-2-8. LANGUAGE SET UP The camera supports 5 differen t languages. Select a preferr ed language.
Version 1.1 - 24 - 5. Communication 1) Connection ◆ Data Communication : Start-Stop Synchronized serial interface ◆ Data length :8 bit data ◆ Stop bit :1 bit ◆ Parity : None ◆ Baudrate : 4800, 9600, 19200, 38 400 bps ※ defaul t value :9 6 0 0 bps 2) Communication Protoco l ◆ All communication data consist of nine bytes.
Version 1.1 - 25 - 9 Byte Fixed Ack. Return Code of Camera ACK is applicable on ly in case that Byte4 of the command is 03H. Byte5, Byte6 and Byte7 of the A ck. data means as follows. ① * Byte5 of the A ck. data indicates whether the camera receive d command successfully.
Version 1.1 - 26 - ◆ Camera Control Command Command Byte4 Byte5 Byte6 Byte7 Byte8 Items Ack COMMUNI CA TION PROTOC OL 02H 19H 03H 00H **H 00 H: SAMSUNG 01 H: VICON 02 H: PANASONIC 03 H: PHILIPS 04 H.
Version 1.1 - 27 - BLC ON USER AREA Horizontal Start Point 02H 02H 07H * Hi * Low 0 x00H ~0 x277H O BLC ON USER AREA Horizontal End Point 02H 02H 08H * Hi * Low 0 x79H ~0 x2B7H O BLC ON USER AREA Vert.
Version 1.1 - 28 - FLICKER- LESS FLICKERLESS 02H 0 CH 00H 00H **H 00 H:OFF , 01 H:ON O * This function is disabled when SHUTTER is F IX or SENS-UP is FIX or AGC is F IX. DIS DIS 02H 15H 00H 00 H **H 00 H:OFF, 01 H:O N O * When zoom ratio is more than 45x including DZOOM, DIS function becomes automatically OFF .
Version 1.1 - 29 - * When BACKLIGHT is BLC, the MASK AREA is disable * The Mask area only can be used in AUTO mode * The area maximum length is 239 ( 0 xEF) ; maximum width is 188 (0 xB C) If you set .
Version 1.1 - 30 - DETAIL DETAIL 02H 0 FH 00H 00H **H 00 H~03H: 0~3 O V-SYNC V-SYNC 02H 10H 00H 00H **H 00 H: INT, 01 H: LI NE LOCK O V-SYNC PHASE 02H 10H 01H ** Hi ** Low NTSC 000 H~20CH: -262~+262 PAL 000 H~270H: -312~+312 O * When power is DC, LINE LOCK is disabled automatically.
Version 1.1 - 31 - PRIVACY M ASK AREA SIZE 02H 17H 03H *1H *2H *1 MASK AREA NO 00H ~ 0 BH : Mask NO.1~12 *2: SIZE adjust 00 H: height increase 01 H: height decrease 02 H: width increase 03 H: width decrease O PRIVACY M ASK AREA LOCATION 02H 17H 04H *1H *2H *1 MASK AREA NO 00H ~ 0 BH : MASK NO.
Version 1.1 - 32 - PRESET ID MENU DISPLAY 02H 2 0H *1H *2H *3H *1H 00 H~FFH: PRESET No.0~255 *2H ( PR E SET ID Sequence) 01 H~ 0C H: 0~1 2 *3H ( String) O * String Table 00H A 05H F 0 AH K0 FH P 14H U.
Version 1.1 - 33 - ◆ Camera Inquiry Command Command Byte4 Byte5 Byte6 Byte7 Byte8 Items ZOOM POSITION 50H FFH FFH FFH FFH A0 00 00 70 ◆◆ ◆◆ ◇◇ ◇◇ " ◇◇ ◇◇ " Zoom Pos.
Version 1.1 - 34 - ◆ Pan/Tilt angle dec ide the privacy area display ( NO Ack. Signal ) Command Byte4 Byte5 Byte6 Byte7 Byte8 Items PAN/TILT ANGLE 02H 25H **H **H **H R eceived the current pan/tilt value, the privacy zone display area will be changed automatically.
An important point after buying a device Samsung SCC-ZM395P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SCC-ZM395P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SCC-ZM395P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SCC-ZM395P you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SCC-ZM395P will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SCC-ZM395P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SCC-ZM395P.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SCC-ZM395P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SCC-ZM395P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
