Instruction/ maintenance manual of the product SCC-C7478 Samsung
Go to page of 33
36x Smart Dome Camera User’s Guide SCC-C7478 imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.
2 – 36x SMART DOME CAMERA Safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.. This symbol indicates high voltage is present inside.
English – 3 ENG Safety information CAUTION Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibrationor magnetic interference. Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°C), or high humidity.
4 – 36x SMART DOME CAMERA Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings.
English – 5 ENG Contents Introduction Features 6 Product & Accessories 7 Parts Name & Functions 8 Installation DIP Switch Setup 9 Installation using Mount Bracket 10 Cabling 13 Operation Che.
6 – 36x SMART DOME CAMERA Introduction FEATURES Camera Specifi cations CCD Sensor : EX-view HAD TM CCD Zoom Magnifi cation : × 36 Optical Zoom, × 12 Digital Zoom (Max × 432 Zoom) Wide Dynamic Range Function Day & Night Function : ICR(IR Cut fi lter Removal) Various Focus Mode : Auto Focus / Manual Focus / Semi-Auto Focus.
English – 7 ENG Introduction PRODUCT & ACCESSORIES Product ❖ Accessories ❖ Wall Mount Type Ceiling Mount Type Hexagonal wrench Anchor bolts (4pcs) Water proof tape Housing Safety Cab.
8 – 36x SMART DOME CAMERA Introduction PARTS NAME & FUNCTIONS Dome Cover Do not detach protection vinyl from dome cover before fi nishing all installation process to protect dome cover from scratches or dust. In the dome cover, there are Fan and Heater to remove moisture on the bubble dome.
English – 9 ENG Installation pkG z GO X¥Y P w iGy yzT [_ { W W WGa GY[W W W W XGa G[_W W W W YGa G`]W.
10 – 36x SMART DOME CAMERA Installation RS-485 Termination Resistor Pin 8 is used for ON/OFF of RS-485 Termination. Normally, it must be OFF state. Especially when you have trouble with long Daisy chain style connection, turn ON this termination switch of last camera.
English – 11 ENG Installation ⑤ After hooking the safety cable on the hole of pipe [1], attach the upper housing to wall mount bracket by turning it at least seven turns [2]. To fi x the upper body orientation, turn the handle of double nuts to clockwise tightly [3].
12 – 36x SMART DOME CAMERA Installation ⑨ Close the dome cover. Care must be taken to locate dome cover by matching the “Arrow” mark. ⑩ Tighten four screws on the dome cover in sequence as shown in the picture bellow. To maintain the best sealing, the torque of each screw must be in the range between 0.
English – 13 ENG Installation BNC VIDEO Connector t o the dom e camera DVR/ Keyboar d D+ D- D+ RS-485 AL ARM O UT PUT 12 34 POWER G 1234 567 8 ALA RM I NP UT NC. Monitor BNC VIDEO Connector t o the dom e camera DVR/ Keyboar d D+ D- D RS-485 DVR/ Keyboar d D+ D- D- D RS-485 AL ARM O UT PUT 12 34 POWER G 1234 567 8 ALA RM I NP UT NC.
14 – 36x SMART DOME CAMERA Installation Video Connection Connect with BNC coaxial cable. Alarm Input Connection Sensor Input a It is noted that short circuit between GND and Input pin means alarm activation. If you want to use Alarm Input, the types of sensor must be selected in OSD menu.
English – 15 ENG Operation CHECK POINTS BEFORE OPERATION Before power is applied, please check the cables carefully. The camera ID of the controller must be identical to that of the camera to be controlled. The camera ID can be checked in the System Information of OSD Menu.
16 – 36x SMART DOME CAMERA Operation PRESET Function Max. 127 positions can be stored as Preset position. The Preset number can be assigned from 1 to 128, but 95 is reserved for starting OSD menu. Camera characteristics (i.e. White Balance, Auto Exposure) can be set up independently for each preset and they are adjusted by using OSD menu.
English – 17 ENG Operation SCAN Function The Scan function allows running sequence of Presets, Pattern and/or Auto Pans. Max 8 Scan can be stored. Each Scan can have max 20 action entities which can be preset, pattern or Auto Pan. Preset speed can be set up and the repeat number of Pattern & Auto Pan can be set up in Scan setup.
18 – 36x SMART DOME CAMERA Operation be set up independently for each preset. There are 2 modes, “General” mode & “Special” mode. The General mode means that WB or AE can be set up totally and simultaneously for all presets in “ZOOM CAMERA SETUP” menu.
English – 19 ENG MAIN MENU System Information Shows info and current confi guration. Display Setup Enable/Disable of OSD display on Main Screen. Motion Setup Setup for motion related settings Function Setup Setup for various functions such as Preset, Auto Pan, Pattern, Scan and Schedule.
20 – 36x SMART DOME CAMERA How to use OSD Menu Display [ON/OFF] Sets if camera makes mask shows or not on images. Clear Mask [CANCEL/OK] Deletes data in the selected mask NO. Privacy Zone Area Setup Move camera to area to mask. Then the menu to adjust mask size will be displayed.
English – 21 ENG How to use OSD Menu Parking Action Setup If Park Enable is set to ON, camera runs assigned function automatically if there is no PTZ command during assigned “Wait Time”. Park Enable [ON/OFF] Wait Time [5 sec ~ 4 hour] The time is displayed with “hh:mm:ss” format and you can change this by 1 sec unit.
22 – 36x SMART DOME CAMERA How to use OSD Menu PRESET SETUP Preset Number [1~128] If a selected preset is already defi ned, camera moves to pre-defi ned position and preset characteristics such as Label and Relay Outputs show on monitor. If a selected preset is not defi ned, “UNDEFINED” shows on monitor.
English – 23 ENG How to use OSD Menu If you want to use blank, choose Space character (“ ”). If you want to delete a character before, use back space character (“ ”). ③ If you complete the Label editing, move cursor to “OK” and press NEAR or ENTER key to save completed label.
24 – 36x SMART DOME CAMERA How to use OSD Menu Edit Pattern ① By using Joystick, move to start position with appropriate zoom. To start pattern recording, press NEAR or ENTER key. To exit this menu, press FAR key. ② Move camera with joystick of controller or run preset function to memorize the path (mostly curve path) in a selected pattern.
English – 25 ENG How to use OSD Menu ③ Set up Action, Dwell time and Option. Note that selected item is displayed in reverse. Move cursor Left/Right to select items and move cursor Up/Down to change each value. Action NO. [NONE/PRESET/AUTO PAN/PATTERN] DWELL [1 second ~ 4 minutes] Sets Dwell Time between functions OPT Option.
26 – 36x SMART DOME CAMERA How to use OSD Menu SCHEDULE SETUP Master Enable [ON/OFF] Decide whether Schedule function is active or not. Edit Schedule ① After move the Cursor to the number by using Up/Down keys, press “ NEAR ”(Enter) Key to edit.
English – 27 ENG How to use OSD Menu CAMERA SETUP Setup the general functions of zoom camera module Focus Mode [AUTO/MANUAL/SEMIAUTO] Sets camera focus mode. SEMIAUTO Mode This mode exchanges focus mode automatically between Manual Focus mode and Auto Focus mode.
28 – 36x SMART DOME CAMERA How to use OSD Menu IRIS [Works when AE MODE is MANUAL or IRIS model] Range: CLOSE/F1.6/F2/F2.4/F2.8/F3.4/F4/F4.8/ F5.6/F6.8/F8/ F9.6/F11/F14/F16/F19/F22/F28. (18 steps) GAIN [Works when AE MODE is MANUAL] Enhances image brightness automatically in case that luminance level of image signal is too low.
English – 29 ENG How to use OSD Menu Password Setup You can defi ne 4 characters long password. If this function is set to ENABLE, it is required to type this password whenever to enter OSD MENU. It is noted that MASTER PSSWORD : “4321” Set Home Position HOME position means the origin of PAN angle calculation.
30 – 36x SMART DOME CAMERA How to use OSD Menu SYSTEM INITIALIZE Clear All Data Deletes all confi guration data such as display, camera, motion setup and so on.
English – 31 ENG Specifi cations SPECIFICATIONS Appearance Wall Mount Ceiling Mount ❖ • • Item Details Camera Broadcasting Type SCC-C7478N : NTSC Standard Color System SCC-C7478P : PAL Standa.
32 – 36x SMART DOME CAMERA Specifi cations DIMENSION Wall Mount Bracket • Unit (mm) Ceiling Mount Bracket •.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature,indicates that it should not be disposed with other household wastes at the end of its working life.
An important point after buying a device Samsung SCC-C7478 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SCC-C7478 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SCC-C7478 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SCC-C7478 you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SCC-C7478 will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SCC-C7478, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SCC-C7478.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SCC-C7478. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SCC-C7478 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
