Instruction/ maintenance manual of the product SCC-B5396N Samsung
Go to page of 33
ENG DIGITAL COLOR DOME CAMERA user manual SCC-B5396 SCC-B5398 imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.
2 – DIGITAL COLOR DOME CAMERA CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
English – 3 ENG S n t e r Safety information If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. Continued use in such a condition may cause fi re or electric shock.
4 – DIGITAL COLOR DOME CAMERA Important Safety Instructions WARNING Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings.
English – 5 ENG s e n d v e o r Contents Introduction Features 6 Product & Accessories 7 Part Names and Functions 8 Installation s Installation procedure 11 Adjusting the camera direction 12 How.
6 – DIGITAL COLOR DOME CAMERA Introduction FEATURES High Resolution This camera has realized high resolution of 600 lines using the top-notch full digital image processing and special algorithm technologies. Intelligent Motion Detection & Tracking This is an intelligent function that automatically detects a motion of an object.
English – 7 ENG Introduction Components Checking components in the package Camera T est Monitor Cable User’s Guide Image Part name Standard Quantity Usage Plastic anchor HUD 5 4 (EA) Attach each piece to screw connection holes for strengthening connection ASSY screw machine BH M5 X L6.
8 – DIGITAL COLOR DOME CAMERA Introduction ❖ • 1 2 4 Lens 91 0 11 3 8 12 Video connector Power connector 5 6 6 7 7 1. Dome cover: Covers the inner cover , lens, and main body to protect them. 2. Cover screw: Use it to assemble or disassemble both dome cover and case.
English – 9 ENG Introduction Setting switches ❖ SETUP Switch This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the MAIN MENU appears. ef (Left/Right) : By pressing this switch left or right, you can move left or right on the menu or change the displayed value.
10 – DIGITAL COLOR DOME CAMERA Installation C B A Bottom of camera Installing camera Before installation Before installing your camera, you have to read the following cautions: Y ou have to check whether the location (ceiling or wall) can bear fi ve times the weight of your camera.
English – 11 ENG Installation n Installing on a pipe Before installation, you have to be familiar with the above cautions and fi ll in the holes that are not used for installation.
12 – DIGITAL COLOR DOME CAMERA Installation Adjusting the camera direction When the camera is fi xed on the ceiling, you can adjust the camera viewing angle. Y ou can rotate your camera leftward or rightward (Panning), and can change the slope of your camera upward or downward (T ilting).
English – 13 ENG e . e 0 b y w s t o e . e g u s e USING ICONS IN THE MENU (EXIT) Exits the menu setting. Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel. (RET) Returns to the previous menu. (HOME) Returns to the main menu.
14 – DIGITAL COLOR DOME CAMERA How to use OSD Menu PROFILE e PROFILE f STANDARD ITS BACKLIGHT DAY/NIGHT GAMING CUSTOM In the PROFILE menu, you can confi gure the following camera settings at once.
English – 15 ENG How to use OSD Menu CAMERA SET Menu STANDARD ITS BACKLIGHT DAY/NIGHT GAMING Previous Menu Sub-menus WHITE BAL DAY DAY/NIGHT DAY DAY/NIGHT DAY D A Y -- --- MODE ATW2 ATW1 ATW1 ATW1 A.
16 – DIGITAL COLOR DOME CAMERA How to use OSD Menu CAMERA SETUP e CAMERA SET f CAMERA ID OFF IRIS ALC MOTION (F.FAST)--- DNR MID SHUTTER OFF SENS-UP AUTO X4 FLICKERLESS (OFF)--- XDR MID .
English – 17 ENG How to use OSD Menu . n - ALC LEVEL [00]----I---- BACKLIGHT OFF The LEVEL menu is used to adjust the overall brightness, where “+” will increase the brightness and “–” will decrease it. ② If you set the BACKLIGHT option to BLC , you will see a menu where you can set the BLC area.
18 – DIGITAL COLOR DOME CAMERA How to use OSD Menu AGC FIX LEVEL [01] If you press the SETUP switch with a FIX sub menu selected, you will see the appropriate screen. As a fi xed value of the AGC gain is used in FIX mode, you can select one of the 16 detailed levels from VERY LOW to VERY HIGH before fi xing it.
English – 19 ENG How to use OSD Menu e n. O s 0) . O Note : If the SENS-UP function is set to AUTO , only items of OFF and AUTO are available in the SHUTTER menu. If the SENS-UP mode is set to FIX , the SHUTTER menu will be deactivated. If the FLICKERLESS function is set to ON , the SHUTTER menu will be deactivated.
20 – DIGITAL COLOR DOME CAMERA How to use OSD Menu If you press the SETUP switch with a NIGHT sub menu selected, you will see a menu where you can set Burst to OFF/ON . If BURST is set to ON , the Burst signal will output together with the black-and-white composite video signal.
English – 21 ENG How to use OSD Menu r o r o You can specify MASK 1 and 2 simultaneously. The MASK is only for determining the mode switching, and any excessive bright area at night will be excluded by the confi gured MASK. Note : If BACKLIGHT is set to BLC , the MASK AREA function will be deactivated.
22 – DIGITAL COLOR DOME CAMERA How to use OSD Menu ATW1 (Auto Tracing White Balance mode 1): The camera can automatically adjust the color temperature in real time, according to the ambient conditions. The color temperature ranges from approx. 2500K to 9300K.
English – 23 ENG How to use OSD Menu a n a l a l . Note : Use of DC 12V will fi x V-SYNC to INT , which can not be changed. AGC COLOR SUP [LOW , MID, HIGH] Adjust the color scheme according to the AGC value. REVERSE [OFF, H, V, H/V] Mirrors video signals horizontally, vertically, or both.
24 – DIGITAL COLOR DOME CAMERA How to use OSD Menu ADVANCED [OFF, FIXED/MOVED, FENCE] Detects a motion of an object and displays an image of any moving object before tracking the moving route. FENCE This is to detect if a moving object passes through the specifi ed LINE or AREA .
English – 25 ENG How to use OSD Menu E o n a f d n . e f y n - How to set the area AREA PIXEL LEVEL [4] <SIZE> <LOCATION> ① If you press the SETUP switch with the AREA option set to ON , you can specify the position and size of the area.
26 – DIGITAL COLOR DOME CAMERA How to use OSD Menu DISPLAY [ON, OFF] With the DISPLAY option set to ON , a motion or a set ADVANCED function will be displayed on the screen, if detected. SENSITIVITY [1~7] Set the sensitivity of the motion detection.
English – 27 ENG How to use OSD Menu L - How to set the point You can set each position of the 4 points. ① If you press the SETUP switch in <POINT> , you will see the points available in the PRIVACY ZONE . Each time you press the SETUP switch, the points available will move.
28 – DIGITAL COLOR DOME CAMERA How to use OSD Menu SYSTEM INFORMATION e SYSTEM INFO f TYPE 3_VAR_NOR_P SERIAL NO. 000000000000000 CAMERA VER. 0.50_090101 You can check the system information such as SERIAL NO and CAMERA VER.
English – 29 ENG Specifi cations SPECIFICATIONS Items Sub-items SCC-B5396N/SCC-B5398N Camera Type CCTV Camera Image Device 1/3” Super-HAD IT CCD Pixels Total 811 x 508 Effective 768 x 494 Scannin.
30 – DIGITAL COLOR DOME CAMERA Specifi cations Items Sub-items SCC-B5396N/SCC-B5398N AGC Off/On (Max.Level Setting) Line Lock Off/On (Phase Control) Camera ID Off/On (Max.
English – 31 ENG Specifi cations Items Sub-items SCC-B5398P/SCC-B5396P Camera Type CCTV Camera Image Device 1/3” Super-HAD IT CCD Pixels Total 795 x 596 Effective 752 x 582 Scanning System Interl.
32 – DIGITAL COLOR DOME CAMERA Specifi cations Items Sub-items SCC-B5398P/SCC-B5396P AGC Off/On (Max.Level Setting) Line Lock Off/On (Phase Control) Camera ID Off/On (Max.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.
An important point after buying a device Samsung SCC-B5396N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SCC-B5396N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SCC-B5396N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SCC-B5396N you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SCC-B5396N will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SCC-B5396N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SCC-B5396N.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SCC-B5396N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SCC-B5396N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
