Instruction/ maintenance manual of the product SCC-B531xN Samsung
Go to page of 20
User’ s Guide SCC-B531x(B) Digital Color Dome Camera ENG FRE SP A JAP AB68-00647C(01)Eng.indd 1 2007-05-14 ｿﾀﾈﾄ 4:22:41.
2 3 This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
2 ENG 3 9. If this product fails to operate normally , contact the nearest s ervice center . Never disassemble or modify this product in any way . (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair .) 10. When cleaning, do not spray water directly onto parts of the product.
4 5 IMPORT ANT SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference.
4 ENG 5 IMPORT ANT SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference.
6 7 17) Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
6 ENG 7 Overview ...................................................................................... 8 About this guide ............................................................................ 8 Product overview ................................
8 9 ❚ About this guide This user guide includes basic instructions for the product. It is recommended that all users read this guide before use. This guide is divided as follows: Chapter 1, “Overview ,” introduces the user guide and product related information.
8 ENG 9 Components of your camera Y our camera has the following components: 1. Cover dome : Covers the lens and main body to protect them. 2. Main body : Includes a lens, a switch board, a PCB board, screws, and such. 3. Locker : Used to open or close the Cover dome.
10 1 1 ❚ Setting switches Setting function switches T o set the available functions on your camera, adjust eight switches as shown below: Installation No Name Brief description 1 LL Line lock ON/OFF.
10 ENG 1 1 2. Switch 2 (LSS) : This sens-up mode accumulates the image fields in memory to reduce noise but increase the brightness and contrast rate. When this switch is set to ON , the camera automatically switches to a maximum of 128 times of image acquisition speed to implement a clear picture for darker image.
12 13 ❚ Connecting cables and setting switches T o connect cables 1. Connect the BNC cable to the Video connector attached on your camera. 2. Connect the BNC cable to the Video Input on a monitor . 3. Connect the power adapter to the Power connector attached on your camera.
12 ENG 13 ❚ Installing camera Before installation Before installing your camera, you have to read the following cautions: Y ou have to check whether the location (ceiling or wall) can bear five times the weight of your camera. Don’t let the cable to be caught in improper place or the electric line cover to be damaged.
14 15 4. When you install the Mount bracket on the ceiling, remove the Ceiling mount opener by pressing it hard to connect the line attached on your camera through the hole in the ceiling. Otherwise, you can use the empty space opposite to the CAMERA FRONT sign for line connection.
14 ENG 15 SCC-B531X AB68-00647C(01)Eng.indd 15 2007-05-14 ｿﾀﾈﾄ 4:23:15.
16 17 Appendix A: Specifications for NTSC Standard Item Details Product type CCTV color dome camera Power input AC 24V ± 10% (60Hz ± 0.3 Hz), DC 12V +10%/-5% Broadcast type NTSC Standard color system (525 Lines, 60 Fields) Power consumption Approx.
16 ENG 17 Item Details Controls Line Lock (LL) Sens-up; Low Speed Shutter(LSS) Horizontal Reverse (H-REV) V ertical Reverse (V-REV) Backlight compensation (BLC) Auto gain control (AGC) Switching betwe.
18 19 Appendix B: Specifications for P AL Standar d Item Details Product type CCTV color dome camera Power input AC 24V ± 10% (50Hz ± 0.3 Hz), DC 12V +10%/-5% Broadcast type P AL Standard color system (625 Lines, 50 Fields) Power consumption Approx.
18 ENG 19 Item Details Controls Line Lock (LL) Sens-up; Low Speed Shutter(LSS) Horizontal Reverse (H-REV) V ertical Reverse (V-REV) Backlight compensation (BLC) Auto gain control (AGC) Switching betwe.
AB68-00647C(01)Eng.indd 20 2007-05-14 ｿﾀﾈﾄ 4:23:16.
An important point after buying a device Samsung SCC-B531xN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SCC-B531xN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SCC-B531xN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SCC-B531xN you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SCC-B531xN will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SCC-B531xN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SCC-B531xN.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SCC-B531xN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SCC-B531xN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
