Instruction/ maintenance manual of the product SCC-931TP Samsung
Go to page of 22
ANTI-V ANDAL DOME CAMERA SCC-931T(P) User ’ s Manual Bedienungsanleitung Guide de l’utilisateur Guía del Usuario Manuale d’uso E D F Es I 00355A(01) SCC-931T(P)-eng 2006.
2 3 E E Impor tant Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
E 5 E 4 T able of Contents Chapter 1 Over view This chapter briefly introduces the Camera and describes its key features, part names and functions. Chapter 1 Overview 5 Introduction 6 Part Names and F.
E 7 E 6 Introduction Par t Names and Functions The Anti-V andal Dome Camera is a dome-typed surveillance device that offers the best features of surveillance for banks, retail stores, commercial buildings, industrial settings, and etc.
8 9 Par t Names and Functions E E ❶ Camera Operation Switches (Setup Switches) The functions of the camera operation switches change depending on whether the Camera is currently in the usual operation mode (i.e., the setup menu is not showing on the screen) or the setup menu mode.
10 11 Before Installation E E Checking the Contents of the Package Be sure to check that the following items are included in the package. Anti-V andal Dome Camera User’s Guide ALARM & RS485 Cable User’s Guide ✔ PLASTIC ANCHOR 2 ea. ❙ ❙ for ceiling installation ✔ ASSY SCREW T APPING 2 ea.
12 13 Before Installation E E Precautions for Installation and Use Installation Examples ✔ Please check whether the installation site can sufficiently support the weight of the Camera before installation. ✔ Make sure that the cable is not caught on anything or its insulation sheath is not removed.
14 15 Preparing Cables E E Installing the Camera The following cables are required to install and use the Camera. Power Adapter Cable Video Cable The power adapter that plugs into the Camera’s power input receptacle has the rated volt- age of DC 12V 600mA or AC 24V 300mA.
16 17 Installing the Camera E E 6. Adjust the LENS direction. 1) Turn the STOPPER RING counter-clockwise as shown in the illustration to move the LENS body and COVER LENS. 2) Move the LENS body to adjust the vertical direction and turn the LENS body together with the COVER LENS to adjust the horizontal direction.
18 19 Installing the Camera E E 6. Remove the DOME COVER to adjust the LENS direction. 1) Use the supplied L WRENCH to unfasten the 4 BOL TS for CASE fixing by turning them counter- clockwise as shown in the illustration. 2) Disassemble the ASSY -DOME in the direction shown in the illustration.
20 21 Installing the Camera E E 7) Route the cables through the PIPE assembly hole on the side of the PIPE, align the INDEX KEY arrow mark ( ) of the CAMERA body to the groove on the CAMERA, mount the CAMERA body and turn it clockwise all the way tight, and then fasten the two SCREWS.
E 23 E 22 Connecting Cables and Checking Operations 1. First connect one end of the BNC cable to the VIDEO OUT . 2. Next, connect the other end of the BNC cable to the video input terminal of the monitor .
E 25 E 24 Structure of the Setup Menu ON... ALC... MANU... MANU... LINE... ON... CAMERA ID ON.../OFF CAMERA ID SETUP CAMERA ID POSITION SETUP AREA SETUP BLC SETUP LEVEL SETUP LEVEL SETUP 3200K/5600K/USER RED, BLUE SETUP PHASE SETUP AREA SETUP SENSITIVITY SETUP RS485, PRESET D-ZOOM, PIP , MIRROR, POSI/NEGA ZOOM SPEED DET AIL SETUP LANGUAGE IRIS ALC.
26 27 CAMERA MENU Or ganization E E ➼ ALC (Auto Light Control) If you set the IRIS to ALC and press the [ENTER] key , a submenu screen where you can set the video output level and BLC will be displayed. In the LEVEL item, you can use the [LEFT/RIGHT] keys to set the video output level.
28 29 CAMERA MENU Or ganization E E AUTO FOCUS In the AUTO FOCUS menu, you can specify the Focus method. Y ou can set the Focus to ONEAF , AF , or MF . ➼ AF (Auto Focus) Automatically FOCUSes by continuously monitoring the screen with the AUTO FOCUS MODE.
30 31 CAMERA MENU Or ganization E E AGC/MOTION ➼ AGC (Auto Gain Control) Y ou can specify whether to control the AGC GAIN when the obtained video is below a certain level of brightness because it was recorded under insufficient lighting.
32 33 CAMERA MENU Or ganization E E ➼ AT W Set the WHITE BAL menu to A TW . ➼ AW C Set the WHITE BAL menu to A WC and press the [ENTER] key with a piece of white paper placed in front of the lens. In the A WC mode, Auto White Balance Control works only when the [ENTER] key is pressed.
34 35 CAMERA MENU Or ganization E E ➼ CTRL TYPE This function is not used on the Anti-V andal Dome Camera. ➼ RS485 Select the Baud Rate (4800, 9600, 19200, or 38400 bps) and Camera Address (0~255) for RS485 communication. When using a multiple number of cameras, each must use a different address.
36 37 CAMERA MENU Or ganization E E Y ou can store up to 10 Zoom and Focus positions with the PRESET . The PRESET function can be used when you connect the SSC-1000(Controller[Sold Separately]) and RS485. When you select the ON... item and press the [ENTER] key , you can use the [LEFT , RIGHT , UP , DOWN] keys to set the PIP position.
38 39 CAMERA MENU Or ganization E E Y ou can move the cursor to the SENSITIVITY position and use the [LEFT/RIGHT] keys to set the sensitivity for MOTION detection (LOW , MEDIUM, HIGH). After setting the position in the same way you did with BLC AREA, press the [ENTER] key to return to the previous MOTION DET MENU.
E 41 E 40 Product Specifications ITEM DESCRIPTION Product T ype Anti-V andal Dome Camera Power Source V oltage AC 24V ± 10% (NTSC:60Hz ± 0.1Hz, P AL:50Hz ± 0.
42 Product Specifications E ITEM DESCRIPTION Back Light Compensation Off/On (Area Setting) Sense Up Off/Auto 2x~128x/Fix 2x~128x Digital Zoom Off/On(x10), PIP Motion Detection Off/On (Area/Sensitivity Setting) Video Control POSI/NEGA, MIRROR, Detail Setting Signal Output Composite Video Out : 1.
An important point after buying a device Samsung SCC-931TP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SCC-931TP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SCC-931TP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SCC-931TP you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SCC-931TP will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SCC-931TP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SCC-931TP.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SCC-931TP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SCC-931TP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
