Instruction/ maintenance manual of the product P715 Ryobi
Go to page of 10
OPERA TOR’S MANUAL 18 VOL T SPOTLIGHT P715 SA VE THIS MANUAL FOR FUTURE REFERENCE Y our spotlight has been engineered and manufactur ed to our high standard for dependability , ease of operation, and operator safety . When properly car ed for , it will give you years of rugged, trouble-free performance.
2 Introduction ..................................................................................................................................................................... 2 W arranty ............................................
3 GENERAL SAFETY RULES WARNING! READ AND UNDERST AND ALL INSTRUCTIONS. Fail- ure to follow all instructions listed below , may result in electric shock, fire and/or serious personal injury .
4 SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the pr oduct better and safer .
5 FEA TURES Fig. 1 PRODUCT SPECIFICA TIONS Bulb ..................................................................6 V Halogen W eight ..................................................................... 1.5 lbs. LOCK-ON BUTTON SWITCH TRIGGER KNOW YOUR SPOTLIGHT See Figure 1.
6 PULL T AB TO REMOVE Fig. 2 REMOVING THE WARNING LABEL See Figure 2. The spotlight has a cling-type attached warning label on the lens. Remove this warning label before use as shown in figure 2. WARNING: Do not allow familiarity with products to make you care- less.
7 OPERA TION DEPRESS BOTH LA TCHES TO RELEASE Fig. 3 ALIGN RAISED RIB ON BA TTERY P ACK WITH GROOVE IN BA TTERY POR T TO INST ALL BA TTER Y P ACK See Figures 3 - 4. Place the switch trigger in the OFF position. Place the battery pack in the spotlight.
8 MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: T o avoid serious personal injury , always remove the battery pack from the pr oduct when cleaning or performing any maintenance.
9 MAINTENANCE BULB ASSEMBL Y Fig. 7 RET AINER PIN CAUTION: Do not use a higher rated fuse other than the specified amperage. This could cause damage to the product. REPLACEMENT FUSE See Figure 8. If the spotlight blows its fuse, you will need to replace it.
10 OPERA TOR’S MANUAL 18 VOL T SPOTLIGHT P715 P715 987000-151 09-24-07 (REV :01) • P ARTS AND SER VICE Prior to r equesting service or pur chasing r eplacement parts, please obtain your model and serial number from the pr oduct data plate.
An important point after buying a device Ryobi P715 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi P715 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi P715 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi P715 you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi P715 will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi P715, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi P715.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi P715. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi P715 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
