Instruction/ maintenance manual of the product 1S85 Rubbermaid
Go to page of 9
RUBBERMAID 7' x 3'6" RESIN STORAGE BUILDING ASSEMBL Y INSTRUCTIONS Pre-Assembly: • Review the parts list and make sure that no parts are missing. • Level the area where the shed will be located. • Areas of “fill dirt” should be tamped/compacted to prevent settling/sinking.
Level construcion site before beginning assembly of shed. A foundation may be constructed if desired. OPTIONAL STEP: If desired, recessed anchor locations (4 places) can be used to anchor the shed floor to a foundation.
Screw Holes C cli c k J-5H51 J-5H51 J-5H51 Lubricate dovetails on Left Back Panel (E) 4 places with liquid soap. Connect Left Back Panel (E) into dovetails of Left Side Panel (C), engage snaps on bottom of Left Back Panel (E) into Floor (J-5H51). Repeat Steps 3– 5 to assemble right side of shed.
1 1 1 1 1 2 2 2 2 2 1 1 1 1 1 2 2 2 2 2 E G E G Q Install Gable (M) onto top of front wall engaging the 2 dovetails on the front panel and the dovetail on the side panel on both the left and right sides of the shed.
Place Ridge Beam (R) into cups at the top of each Gable (M). Align slots in Ridge Beam (R) with holes in Gable (M) tabs, install Bolt (BB), Washer (CC), and Nut (DD) 1 place, ONL Y TIGHTEN NUT ‘FINGER’ TIGHT .
Lubricate roof snaps on Gable (M) 8 places on each Gable (M). Raise the Left Roof Panel (N) onto the left side of the shed assembly , the arrows on the roof panel should face the inside of the shed and point towards the Ridge Beam (R).
Install Screws (AA) 16 places in Gable (M). While one person holds down the bottom of the roof, install screws (AA) 4 places in screw holes on the top of the Side Panels (C&D).
Install Roof Pins (EE) 4 places connecting the Roof Panels to the Gables. 2 1 EE (4) OPTIONAL STEP: If desired, add wood to create a loft (wood not included). .75" x 24" x 37.5" .75" x 37.25" x 37.5" .75" x 24" x 37.
88.09" 94.62" 45.06" 1869757 Customer Service T oll Free: 1-888-895-2110 M–F 8:30 AM to 5:00 PM EST or visit us at www .rubbermaid.com Printed in U.S.A. © 2012 Rubbermaid Incorporated Huntersville, NC U.S.A. 28078-1801 www .rubbermaid.
An important point after buying a device Rubbermaid 1S85 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Rubbermaid 1S85 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Rubbermaid 1S85 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Rubbermaid 1S85 you will learn all the available features of the product, as well as information on its operation. The information that you get Rubbermaid 1S85 will certainly help you make a decision on the purchase.
If you already are a holder of Rubbermaid 1S85, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Rubbermaid 1S85.
However, one of the most important roles played by the user manual is to help in solving problems with Rubbermaid 1S85. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Rubbermaid 1S85 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
