Instruction/ maintenance manual of the product 6424 AB Soft
Go to page of 14
OUTDOOR STORAGE BUILDING OWNER’S MANUAL MODEL 6424 30” OUTDOOR STORAGE EXTENSION KIT OUTDOOR STORAGE Copy.
BEFORE BEGINNING ASSEMBLY Identify and inventory all parts using the checklist boxes on the Parts List. Keep the hardware bags and their contents separate.
3 11 0 11 4 125 AE TK TB TA AC AB AA AD HARDWARE IS ACTUAL SIZE (Unless otherwise indicated) TI TJ TD TF TH TE If you are Installing a New Shed 1. Check contents of boxes and compare to parts listed on the Parts List.
4 1 a. Remove last three skylights. 2 a. Remove the back 3 roof caps. 3 a. Remove the back Roof panels and Roof support bars. **Save all hardware for re-assembly!**.
5 4 a. Remove the next Roof panels and Roof support bars. 5 a. Remove the Roof T russ..
6 6 a. Remove the last two Side W all Panels. 7 a. Slide the back section of the shed away from the front. Y ou will need to tip the back section forward slightly in order to disconnect the fl oor panels Be sure that there is nothing on the back shelves before moving the back section.
7 a. Remove plastic sheeting from Window (AE) and slide Window into slot on the Window W all Panel (125). Attach a Window Latch (TK) above each corner of the Window as shown. When tightening screws (TH), be sure that Window Latches will slide freely .
8 9 a. Add new Floor Panel (1 10). Then, slide the back section into place and connect the fl oor panels (you will need to tip the panels forward slightly to connect the panels). 10 a. Add W all Panels (108). Insert a wood block directly under the tab you want to insert, then slide block to next tab and repeat.
9 b. Use T russ Connector (T A) to attach Roof T russ Channels at top. Secure with Screws (TF) and Nuts (TE). Before completely tightening, lay assembly on its side to be sure Channels and Brace are parallel. Completely tighten all hardware. 11 Assemble T russ a.
10 c. Slide a Threaded Rod through the Truss Support Brace and the top of the T russ Connector . TD (2) d. Secure the top and bottom of the Threaded Rod with a 1/4” Cap Nut (TD).
11 12 a. Add T russ. 13 a. Add Roof Panels (1 14) and Roof Supports (AD). b. Add a center Roof Cap (1 17). Roof Panel Ridge Roof Panel Wal l.
12 14 a. Add next T russ. 15 a. Add Roof Panels (1 14) and Roof Supports (AD). b. Add a center Roof Cap (1 17)..
13 b. Add the last Center Roof Cap (1 17) and the End Roof Cap. 16 a. Add Roof Panels (1 14) and Roof Supports (AD). 17 a. Add Skylights.
14 Congratulations on your Lifetime ® Outdoor Shed purchase. By following the instructions below , your new Lifetime shed should provide you with years of service and enjoyment. Cleaning and Care The polyethylene walls and shelves are stain- and solvent resistant.
An important point after buying a device AB Soft 6424 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AB Soft 6424 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AB Soft 6424 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AB Soft 6424 you will learn all the available features of the product, as well as information on its operation. The information that you get AB Soft 6424 will certainly help you make a decision on the purchase.
If you already are a holder of AB Soft 6424, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AB Soft 6424.
However, one of the most important roles played by the user manual is to help in solving problems with AB Soft 6424. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AB Soft 6424 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center