Instruction/ maintenance manual of the product RC-100 Rosewill
Go to page of 8
USB 2.0 2-Port PCI Adapter RC100 User Manual.
1 User Manual USB 2.0 2-Port PCI Adapter RC100 System Requir ements • Windows® 98SE, 2000, ME, XP(Pentium® or K6® - class processor -266 MHz or higher) • Mac® OS 10.1 or Above • 32MB of RAM • Available PCI Slot • CD-ROM Drive(for driver installation) Specifications • VIA VT6212L chipset • USB 1.
2 User Manual USB 2.0 2-Port PCI Adapter RC100 Pin No. Definition 1 Power 2 Power 3 USB3 D- 4 USB4 D- 5 USB3 D+ 6 USB4 D+ 7 GND 8 GND 9 No Pin 10 NC 1. Remove your computer’ s cover . (Note: If necessary , consult your computer’ s manual for help in removing the cover) 2.
3 User Manual USB 2.0 2-Port PCI Adapter RC100 Controller” driver sear ch program. Click “Next”. 2. Select “Search for the best driver for your device”. Click “Next”. 3. Don’t select any location and click “Next”. 4. Select “The updated driver (Recommended) VIA T ech 3038 PCI to USB Universal Host Controller”.
4 User Manual USB 2.0 2-Port PCI Adapter RC100 5. Click “Next” again to confirm the driver and begin installation. Please insert the disk labeled “Windows 98 CD disk”. 6. After driver installation finished, click “Finish”. 7. Next, you will see Windows find a “VIA T ech 3038 PCI to USB Universal Contr oller” device again.
5 User Manual USB 2.0 2-Port PCI Adapter RC100 10. Once you have rebooted, your USB 2.0 Four Port PCI Car d is ready to be used. If you open the Device Manager , you will see the newly installed devices. T o locate the Device Manager right click “My Computer” and select “Properties”, then the “Device Manager” tab.
6 User Manual USB 2.0 2-Port PCI Adapter RC100 2. After you have rebooted, Please insert the Driver CD into the CD-ROM drive of your computer . Browse to the VIA USB 2.0 Driver Folder “PCI_IOV iausb20” on the Driver CD, then double-click the installation file “Setup.
7 User Manual USB 2.0 2-Port PCI Adapter RC100 Windows® XP Installation Windows® XP operating system natively supports this USB 2.0 Four Port PCI Card.
An important point after buying a device Rosewill RC-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Rosewill RC-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Rosewill RC-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Rosewill RC-100 you will learn all the available features of the product, as well as information on its operation. The information that you get Rosewill RC-100 will certainly help you make a decision on the purchase.
If you already are a holder of Rosewill RC-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Rosewill RC-100.
However, one of the most important roles played by the user manual is to help in solving problems with Rosewill RC-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Rosewill RC-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
