Instruction/ maintenance manual of the product REVDN700-2 REVO
Go to page of 21
INSTRUCTION MANUAL WDR Super High Resolution Day & Night Color Camera Model No: REVDN700-2 Vandal Proof dome Camera.
LIMITATION OF LIABILITY THE INFORMATION IN THIS PUBLICAT IO N IS BELIEVED TO BE ACCURATE IN ALL RESPECTS, HOWEVER, WE CANNOT ASSUME RESPONSIBILITY FOR ANY CONSEQUENCES RESULTING FROM T HE USE THEREOF. THE INFORMATION CONTAINED HEREIN IS SUBJECT TO CH ANGE WITHOUT NOTICE.
W ARNING This i s a Class A product. I n a domes ti c e nvir onment t his pr oduct may cause radio inter fer ence in whi ch cas e the user may be requi red to ta ke adequat e measures .
TABLE OF CONTENTS CONTENTS OF PACKAGE ------------------------------------------------------------------------- 4 INTRODUCTION -------------------------------------------------------------------------.
INTRODUCTION The camera provided high- quality image using SONY 1/3” CCD and di gital signal processing LSIs. Features: z 1/3" Super-HAD CCD z Super high-resolution (700T VL) z Wide Dynamic Range z Day & Night(Auto, Manual, External, Filter delay, Chan ge level adjust) z 0.
CAMERA CONNECTIONS Connection Cable Description COLOR Description RED AC24V/DC12V WHITE AC24V/DC12V BLUE RS485(-) GREEN RS485(+) YELLOW ALARM OUT GRAY DN EXT-IN BLACK&WHITE DN EXT-OUT BLACK GND SK.
INSTALLATION 1. Loosen the four torx screws located midw ay up the front of the housing leavin g the screws intact in the front portion. (Fig. 1) 2. Drill the mounting location, usin g the Drilling guide. (Fig. 3) 3. Attach the housing to the ceiling using s u itable fasteners, M6x3 5 tapping screws are supplied.
LENS ADJUSTMENT Focus : Adjust lens focus from near (N) to infinity. Field of vie w : Adjust setting from Telephoto (T) to wide (W) field of View. DC AUTO IRIS LENS 2.6-6mm 4-9mm 2.8~12mm 6-50mm Image Size 1/3” CCD 1/3" CCD 1/3" CCD 1/3" CCD Focal Length 2.
CAMERA OVERVIEW A. Up B. Right C. Down D. Left E. Enter External AD Key Control (optional) <Remarks> 1) Menu: Represent presen t menu subject on top of screen. In case of used Multi-Camset, Represen t CAM ID and “camset” name included. Common Headers: : Currently active menu item is displayed.
* There are 4 types of configuration area. Editing Area(No Save), Default(Read On ly). Sa ve Area(Use on Start), Backup * Don’t Power off while doing Save, Load, Back up, Overwrite CAMERA ADJUSTMENT <White Balance> 1) A TW/Wide Mode : No limits in the range of color temperature.
improve this phenomenon. NOTE: * Motion is none : Noise removal mode. * Motion is occured: Fast screen update mode. 3) Low Light : If using UDF function, this function being dis abled.
If you exit menu, doing Initialize started while 4~5 seconds the backgrou nd. During initialization the backgr ound, it is good to be none of moving objects. When Day / Night mode is changed or C am Se t is changed, the background of the re- initialization performed.
Poly (Polygon) It you select one of “a,b,c,d ”, the active point is displayed. Move the point with 4-arrow keys. Press [ENTER] key is to finish edit point. NOTE: * For more than 180 of interior angle is not permitted. Line : Select Start/End Point.
*) Please don ’ t use as a signal for video recording start. * ) In Simple mode is not supported. Abandon/A b s ent Rect, Poly Detect different region to stored background. *) Please don’t use as a signal for video recording start. * ) In Simple mode is not supported.
Rst Time (sec): Time for maintain event. Afte r this, background will be update. Unfocus : Detection on/off of unfoc used state/defoc used state. - Windy Setup (Windy Area Detection Setup) : Not applied in Simple PVA mode Sens(Sensitivity) : Adjust sensitivity of windy object detection.
live mode. So not only reduci ng the recording data but also not to miss object movement. - No Motion(s) : Adjust Interval while no motion. - Motion (0.1s) : Adjust Interval while motion exists. <System Setup> 1) General - Cam Info : Display camera basic information.
* User can stop the pr oceeding while on operating. Done : Complete white pixel detection. View Detected WP: Print detected pixel on s creen. Retry : Restart WPC process.
3) Lens : Select lens (DC lens/Video lens/Manual Lens) - Iris Speed: Only for DC/Video Lens, Adjust Iris speed. NOTE: * If iris speed is too high, it can occur AE hunting. * If iris speed is too low, IRIS adjusting operate too slow ly. 4) LLC (Line Lock Con trol) Active only used AC Power.
EXTERNAL DIMENSION Window Size 0.1 in. (2.5mm thick), impact-resistant P.C (LEXAN) 3.93 in. (10cm) diameter Cable Entry One 1" (25mm) opening holes Weight – Unit: Shippi ng: 1.
SPECIFICATIONS ITEM NTSC PAL ELECTRICAL Input Voltage DUAL(DC12V, AC24V) ±10% Power Consumption 3.5 Watts (300mA) Power Connector 2-Pi n Terminal Block VIDEO Image Device 1/3" Sony EXview 960H CCD II Total Pixels 1020(H) x 508(V) 1020(H) x 596(V) Effective Pixels 976(H) x 494(V) 976(H) x 582(V) Scanning System 2:1 Interlace Sync.
5030xxxxA 21.
An important point after buying a device REVO REVDN700-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought REVO REVDN700-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data REVO REVDN700-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, REVO REVDN700-2 you will learn all the available features of the product, as well as information on its operation. The information that you get REVO REVDN700-2 will certainly help you make a decision on the purchase.
If you already are a holder of REVO REVDN700-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime REVO REVDN700-2.
However, one of the most important roles played by the user manual is to help in solving problems with REVO REVDN700-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device REVO REVDN700-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
