Instruction/ maintenance manual of the product REMJ70 Remington
Go to page of 24
PORT ABLE FORCED AIR HEA TERS OWNER’S MANUAL 150 SIDE HANDLE PFA/PV 005 REMJ150 IMPORTANT Read and understand this manual before assembling, starting or servicing heater. Improper use of heater can cause serious injury. Keep this manual for future reference.
2 102961 Safety Information ......................................................................... 2 Product Identification .................................................................... 4 Unpacking ..........................................
3 102961 SAFETY INFORMA TION Continued W ARNINGS (Continued) • Use only kerosene to avoid risk of fire or explosion. Never use gasoline, naphtha, paint thinners, alcohol, or other highly flammable fuels.
4 102961 Side Cover PRODUCT IDENTIFICA TION Figure 1 - REMJ70 Fan Guard Power Cord Fuel Cap Fan Guard Hot Air Outlet Upper Shell Fuel Tank Lower Shell Fuel Gauge Flame-Out Control Reset Button ON/OFF .
5 102961 UNP ACKING 1. Remove all packing items applied to heater for shipment. 2. Remove all items from carton. 3. Check items for any shipping damage. If heater is damaged, promptly inform dealer where you bought heater. ASSEMBL Y These models are furnished with wheels and handles.
6 102961 THEOR Y OF OPERA TION The Fuel System: The air pump forces air through the air line. The air is then pushed through the burner head nozzle. This air causes fuel to lift from the tank. A fine mist of fuel is sprayed into the combustion chamber.
7 102961 W ARNING Review and understand the warnings in the Safety Information Section , page 3. They are needed to safely operate this heater. Follow all local codes when using this heater. OPERA TION To Start Heater 1. Follow all ventilation and safety information.
8 102961 To Stop Heater 1. Turn ON/OFF switch to “OFF.” 2. Unplug power cord from outlet. To Restart Heater 1. Wait 2 minutes after stopping heater. 2. Repeat steps under To Start Heater , page 7. Note: If shipping, transport companies require fuel tanks to be empty.
9 102961 TROUBLE- SHOOTING OBSERVED FAULT POSSIBLE CAUSE REMEDY Wrong pump pressure Dirty air output, air intake, and lint filters Dirty fuel filter Dirt in nozzle Dirty photocell lens Bad flame-out control Heater ignites, but flame-out control shuts off heater after a short period of time See Pump Pressure Adjustment , page 12.
10 102961 SER VICE PROCEDURES Upper Shell Removal 1. Remove screws along each side of heater using 5/16" nut-driver. These screws attach upper and lower shells together. 2. Lift upper shell off. 3. Remove fan guard. Figure 9 - Fuel Filter Removal (REMJ70) Side Cover Fuel Filter (REMJ70) 1.
11 102961 Fuel Filter (REMJ150) 1. Remove side cover screws using 5/16" nut-driver. 2. Remove side cover. 3. Pull upper fuel line off fuel filter neck. 4. Carefully pry bushing, lower fuel line, and fuel filter out of fuel tank. 5. Wash fuel filter with clean fuel and replace in tank.
12 102961 Air Output, Air Intake, and Lint Filters 1. Remove upper shell (see page 10). 2. Remove filter end cover screws using 5/16" nut- driver. 3. Remove filter end cover. 4. Replace air output and lint filters. 5. Wash or replace air intake filter (see Preventative Maintenance Schedule, page 8).
13 102961 Nozzle 1. Remove upper shell (see page 10). 2. Remove fan (see page 15). 3. Remove fuel and air line hoses from burner head. 4. Remove spark plug wire from spark plug. 5. Remove spark plug from burner head using 13/16" open-end wrench. 6.
14 102961 Pump Rotor (Procedure if rotor is binding) 1. Remove upper shell (see page 10). 2. Remove filter end cover screws using 5/16" nut- driver. 3. Remove filter end cover and air filters. 4. Remove pump plate screws using 5/16" nut- driver.
15 102961 REMJ70 REMJ150 Heat Output (Kcal/hr) 17,640 38,500 Fuel Consumption (liters/hr) 1.9 4.2 Fuel T ank Capacity (liters) 16 47 Run T ime per T ank (hours) 8 11 Hot Air Output (m 3 /min) 6.7@50Hz 12.4@50Hz 7.5@60Hz 13.7@60Hz V oltage 100 100 Frequency (Hz) 50/60 50/60 W attage (W) 200 340 Pump Pressure (kg/cm 2 ) 0.
16 102961 ILLUSTRA TED P ARTS BREAKDOWN REMJ70 18-2 Motor and Pump Assembly 18-5 18-16 18-4 18-8 18-3 18-6 18-7 18-9 18-10 18-11 18-12 18-13 18-14 18-15 10-2 10-3 10-4 10-5 10-6 10-7 10-1 18-1 18-18 B.
17 102961 KEY PART PART NO. NUMBER DESCRIPTION QTY. 19 M50050 Rubber Boot 1 20 NTC-4C Hex locknut 2 21 M50104-02 Shorty Bushing (wires) 1 22 M11084-26 Screw, #10-16 x 3/8" 6 23 098511-81 Lower Sh.
18 102961 10-2 10-11 Motor and Pump Assembly 10-1 10-4 10-3 10-5 10-6 10-7 10-8 10-9 10-10 10-12 10-13 10-14 10-15 10-16 10-17 10-18 BURNER HEAD 100 EAI/EBI PFA/P 022 Burner Head Assembly 7-1 7-2 7-3 .
19 102961 17 101901-03 Electronic Ignitor 1 18 M11084-29 Screw, #10-16 x 3/4" 2 19 M51345-01 Fuel Line 1 20 M51150-01 Fuel Filter 1 21 M51151-02 Fuel Line Tube 1 22 M10990-3 Rubber Bushing 1 23 M.
20 102961 WHEELS AND HANDLES 3 6 5 7 2 4 1 7 4 3 5 6 1 2 REMJ70 REMJ150 KEY PART PART REMJ70 REMJ150 NO. NUMBER DESCRIPTION QTY. QTY. 1 097198-02 Handle (Rear) 1 — 097777-03 Handles — 2 2 M12345-3.
21 102961 WIRING DIAGRAMS White Photo- cell Black Blue Flame Out Control B Reset Button R Red Blue White Spark Plug Green/ Yellow Black Power Plug Green White White White Red Red Green Terminal Board Motor Ignitor Plug Receptacle Power On Switch Black Red Relay Black ACCESSOR Y Purchase accessory from your local dealer.
22 102961 NOTES _________________________________________________________________ _________________________________________________________________ ____________________________________________________.
23 102961 NOTES _________________________________________________________________ _________________________________________________________________ ____________________________________________________.
24 102961 Printed in U.S.A. 102961-01 Rev. A 06/96.
An important point after buying a device Remington REMJ70 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Remington REMJ70 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Remington REMJ70 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Remington REMJ70 you will learn all the available features of the product, as well as information on its operation. The information that you get Remington REMJ70 will certainly help you make a decision on the purchase.
If you already are a holder of Remington REMJ70, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Remington REMJ70.
However, one of the most important roles played by the user manual is to help in solving problems with Remington REMJ70. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Remington REMJ70 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center