Instruction/ maintenance manual of the product Vmux-2100 RAD Data comm
Go to page of 118
Vmux-2100 Installation and Operation Manual Voice Trunking Gateway.
.
Vmux-2100 Voice Trunking Gateway Installation and Operation Manual Notice T h i s m a n u a l c o n t a i n s i n f o r m a t i o n t h a t i s p r o p r i e t a r y t o R A D D a t a C o m m u n i c a t i o n s L t d .
Limited Warranty RAD w arr ant s to D IST RIB UTOR that the hard war e in the Vmux-2100 to be deli ver ed he reu nde r sha ll be free of defects i n material and workmanship unde r normal use and service for a period of twelve (12) months following the date of shipment to DISTRIBUTOR.
General Safety Instructions The following in structions ser ve as a general guid e for the safe installation and operation of telecommunications products. Addition al i nstructions, if appl icable, are included ins ide the manual. Safety Symbols This symbol may appear on the equipment or in the text.
Handling Energized Products General Safety Practices Do not touch or tamper with the power supply when the power cord is connected. Line voltages may be present inside certain products even when the powe r switch (if installed) is in the OFF position or a fuse is blown.
Connection of Data and Telecommunications Cables Data and telecommunicatio n interfaces ar e classified accor ding to their safety status. The following table list s the status of several standard in terfaces. If the st atus of a given port differs from the standard one, a no tice will be given i n the manual.
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cords. Pour réduire les risques s’incendie, utiliser seulement des conducteurs de télécommunications 26 AWG ou de section supérieure. Some ports are suitable for connection to intra-buildin g or non-exposed wiring or cabling only.
FCC-15 User Information This equipment has been tested and found to comply with the limits of the Class A digital device, pursuant to Part 15 of the FCC rules. These limi ts are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Declaration of Conformity Manufacturer’s Name: RAD Data Communications Ltd. Manufacturer’s Address: 24 Raoul Wallenberg St. Tel Aviv 69719 Israel Declares that the prod uct: Product Name: VMUX-210.
Vmux-2100 Installation and Operation Manual i Contents Chapter 1. Introduction 1.1 Overview .......................................................................................................... 1-1 Versio ns ......................................
Table of Contents ii Vmux-2100 Installation and Operation Manual Turning Off Vmux-2100........................................................................................... 3- 2 3.3 Default Settings ...............................................
Table of Contents Vmux-2100 Installation and Operation Manual iii Configuring Voice Card Parameters .......................................................................... 5-3 Transferring Database to the Remote Vmux-2100 ..........................
Table of Contents iv Vmux-2100 Installation and Operation Manual List of Figures 1-1. Transmitting Comp ressed Voic e and Signaling over IP Network ................................. 1-2 1-2. Transmitting 480/384 Voice Channels ov er a Single E1/T1 Link (16:1 Compression) .
Table of Contents Vmux-2100 Installation and Operation Manual v 4-33. Edit Bundle Men u ................................................................................................. 4-26 4-34. Connectivity Parameters Menu .........................
Table of Contents vi Vmux-2100 Installation and Operation Manual List of Tables 1-1. Ethernet Frame Fiel ds ................................................................................................ 1-8 1-2. UDP Source Port as Destinat ion Voice Port .
Overview 1-1 Chapter 1 Introduction 1.1 Overview Vmux-2100 is a modular voice trun king gate way that enables up to 16 E1 or T1 circuits to be extended over a single E1, T1 or IP link.
Chapter 1 Introduction Vmux-2100 Installation and Operation Manual 1-2 Overview Applications Figure 1-1 sh ows a Vmux-2100 application, where the gateway transmits compres sed voice over a n IP netw ork, includ ing transparent tran smissio n of CCS and CAS signaling.
Vmux-2100 Installation and Operation Manual Chapter 1 Introduction Overview 1-3 Features E1 Main Link Balanced redundant E1 main links port s use HDB3 coding and c omply with G.703, G.704, G.706, G. 732 and G.823 standards. The E1 fra mers support pass-through, G.
Chapter 1 Introduction Vmux-2100 Installation and Operation Manual 1-4 Overview Bundling Bundle is a logical internal port of Vmux- 2100, containing up to 60 timeslots. Each E1/T1 group handles up to five bundles. A bundle is route d to a defined remo te IP address (remote group address).
Vmux-2100 Installation and Operation Manual Chapter 1 Introduction Physical Description 1-5 Vmux-2100 supports a four-level secu rity and user-authenticatio n system: • Administrator – Allowed to configure all the parameters of Vmux-2100.
Chapter 1 Introduction Vmux-2100 Installation and Operation Manual 1-6 Functional Description 1.3 Functional Description Figure 1-5 illustrates the block diagra m of Vmux-2100.
Vmux-2100 Installation and Operation Manual Chapter 1 Introduction Functional Description 1-7 In addition to the translation of individu al bits, the signaling profiles can also be used to define the signaling bit patterns that indicate the idle and OOS states.
Chapter 1 Introduction Vmux-2100 Installation and Operation Manual 1-8 Functional Description Ethernet Frame At a later stage, the TDMoIP frame becomes a part of the standard Ethernet frame, which also includes a UDP header, IP he ader and MAC.
Vmux-2100 Installation and Operation Manual Chapter 1 Introduction Functional Description 1-9 VLAN Support Vmux-2100 supports VLA N, according to IEEE 802.1p&q. When VLAN support is enabled Vmux-2100 ad ds four bytes t o th e MAC layer of the Ethernet frame.
Chapter 1 Introduction Vmux-2100 Installation and Operation Manual 1-10 Functional Description Bandwidth Utilization By using TDMoIP multipl exing and the voice activity detection, Vmux-2100 supports a higher number of voice channe ls over TDM than it is poss ible by utilizin g conventio nal compres sion meth ods alone.
Vmux-2100 Installation and Operation Manual Chapter 1 Introduction Technical Specifications 1-11 1.4 Technical Specifications Ethernet Main Link Standards IEEE 802.
Chapter 1 Introduction Vmux-2100 Installation and Operation Manual 1-12 Technical Specifications T1 Main Link Number of Links Two (one re dundant) Data Rate 1.
Vmux-2100 Installation and Operation Manual Chapter 1 Introduction Technical Specifications 1-13 Line Code AMI Zero Suppression B8ZS Framing D4, ESF Receive Signal Level 0 to -36 dB with CSU 0 to -30 dB without CSU Transmit Signal Level 0, -7.5, -15, or -22.
Chapter 1 Introduction Vmux-2100 Installation and Operation Manual 1-14 Technical Specifications Indicators Ethernet Main Link ACT (yellow), blinks according to the Ethernet traffic LINK (green), ON .
Site Requirements and Prerequisites 2-1 Chapter 2 Installation and Setup This chapter describes installation an d setup procedures for the Vmux-2100 device.
Chapter 2 Installation and Setup Vmux-2100 Installation and Operation Manual 2-2 Installation and Setup 2.2 Package Contents The Vmux-2100 package includes the following items: • One Vmux-2100 unit .
Vmux-2100 Installation and Operation Manual Chapter 2 Installation and Setup AM Installation and Setup 2-3 JP1 6 JP1 4 JP11 JP1 3 JP8 JP1 2 JP5 JP7 FGND 3 , 6 FGND 3 , 6 NO NO YES JP10 JP1 JP9 UNBA L UNBA L UNBA L UNBA L UNBA L UNBA L UNB UNB JP6 BAL BAL BAL BAL BAL BAL BAL BAL YES Figure 2-1.
Chapter 2 Installation and Setup Vmux-2100 Installation and Operation Manual 2-4 Installation and Setup Connecting the Main Link The Vmux-2100 Ethernet main link interface termi nates in an 8-pin R J-45 connector. Appendix A specifies the pinout of the Ethernet connector.
Vmux-2100 Installation and Operation Manual Chapter 2 Installation and Setup AM Installation and Setup 2-5 Connecting the Power Vmux-2100 includes two hot-swappable AC or DC power supplies, supporting load sharing. To connect Vmux-2100 t o the power source, refer to the appropriate section below, depending on your ver sion of the unit (AC or D C).
Chapter 2 Installation and Setup Vmux-2100 Installation and Operation Manual 2-6 Installation and Setup.
Front Panel Indicators 3-1 Chapter 3 Operation This chapter provides the following information for Vmux-2100: • Vmux-2100 front-panel indicators • Operating procedures (turn-on, fron t-panel indications, performance monitoring and turn-off).
Chapter 3 Operation Vmux-2100 Installation and Operation Manual 3-2 Operating Vmux-2100 Table 3-1. Vmux-2100 L EDs (Cont.) Name Function Location LINK (green) ON – Good link integrity Ethernet main .
Vmux-2100 Installation and Operation Manual Chapter 3 Operation Default Settings 3-3 3.3 Default Settings Vmux-2100 is managed by an ASCII te rminal or PC running a terminal emulat ion program via menu-driven embe dded software. Table 3-3 lists the default settings of the Vmux-2100 configurat ion parameters.
Chapter 3 Operation Vmux-2100 Installation and Operation Manual 3-4 Default Settings Table 3-3. Vmux-2100 D efault Settings (Cont.) Parameter Default Value Main Link (T1 Parameters) Connect No Clock S.
Vmux-2100 Installation and Operation Manual Chapter 3 Operation Default Settings 3-5 Table 3-3. Vmux-2100 D efault Settings (Cont.) Parameter Default Value External E1 Connect No Frame 732S Restoratio.
Chapter 3 Operation Vmux-2100 Installation and Operation Manual 3-6 Default Settings.
Preparing for the Control Session 4-1 Chapter 4 Management from a Terminal The configuration of Vmux-2100 is per formed via menu-dr iven embedded software, using a standard ASCII terminal or a PC running a terminal emulat ion application connected to the rear panel CONTROL port.
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-2 Preparing for t he Control Session Initiating a Control Session Vmux-2100 supports two de fault terminal rates: • 115.2 kbps, for 2 0–30 seconds after the power-u p, until the boot sequence is completed.
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Navigat ing the Management Menus 4-3 4.2 Navigating the Management Menus This section provides a ge neral description of the software men u operation and conventions for navigating the menus.
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-4 Starting the Control Session 4.3 Starting the Control Session Once you have installed Vmux-210 0, and completed the installa tion and operation procedures described in Chapter 2 and Chapter 3 , you can start the control session.
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring the Vmux-2100 System 4-5 4.4 Displaying the Vmux-2100 Inventory Vmux-2100 inventory displays information on the types of the voice modules detected in the unit, together with their hardware and software versions.
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-6 Configuring the Vmux-2100 System Configuration 1. System 2. Hub 3. Card @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 4-4. Configuration Men u 2.
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring the Vmux-2100 System 4-7 Management 1. Host IP 2. Manager List 3. Host Mux Name ... 4. User Administration 5. Signaling Configuration 6. Telnet (Enable) @ - Db Update; # - Db Undo ESC-prev.
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-8 Configuring the Vmux-2100 System Defining the Manager List You can define the network ma nagement stations to which the SNMP agent of Vmux-2100 will send traps. Up to ten managers can be defined.
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring the Vmux-2100 System 4-9 User Administration 1. Add New User 2. Delete User 3. Change User Details 4. Show All Users > @ - Db Update; # - Db Undo ESC-prev.
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-10 Configuring the Vmux-2100 System Deleting an Existing Us er from the Database To delete an existing user: 1. From the User Administration menu, choose Delete User .
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring the Vmux-2100 System 4-11 4. Choose Confirm and save password and then re-enter the new password to confirm the change.
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-12 Configuring the Vmux-2100 System Configuring the Control Port Vmux-2100 allows you to config ure the baud rate, timeout period, and connection of a dial-in modem to the rear panel CONTROL port.
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring the Vmux-2100 System 4-13 3. From the Dial-In Modem menu, choose: Disable to disable connection of a dial-in modem to the control port Enable to enable connection of a dial-in mo dem to the control port.
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-14 Configuring the Vmux-2100 System Signaling Configuration 1. Signaling Profile Configuration 2. SS7 Keep-Alive Suppression Rate (0% - No Suppression / Not SS7) @ - Db Update; # - Db Undo ESC-prev.
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring the Vmux-2100 System 4-15 6. In the signaling table, select a signaling bit that you want to configure by pressing <Tab> .
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-16 Configuring the Vmux-2100 System To configure the keep-alive suppression rate: 1. From the Signaling Configuration menu (see Figure 4-15 ), choose SS7 Keep-Alive Suppression Rate .
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Entering Main Link and Voice Modules into the Database 4-17 Date & Time Update 1. Set Time (hh:mm)... (13:23) 2. Set Date (dd/mm/yyyy)... (4/2/2002) @ - Db Update; # - Db Undo ESC-prev.
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-18 Configuring Main Link and Voice E1/T1 Ports 3. From the Main Board menu, select one of the following module types: M-IP – 10/100BaseT port only M-IPE1 – 10/100BaseT port and E1 port M-IPT1 – 10/100BaseT port and T1 por t.
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring Main Link and Voice E1/T1 Ports 4-19 Configure the timeslots of each E1/T1 port (voice or data, mapping to specific bundles, routing to remote ports an d timeslots).
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-20 Configuring Main Link and Voice E1/T1 Ports Lan Parameters 1. Set Auto Negotiation (Disable) 2. Set Capability > (100baseT Full Duplex) @ - Db Update; # - Db Undo ESC-prev.
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring Main Link and Voice E1/T1 Ports 4-21 Main Link 1 or Main Link 2 1. Connect > (Yes) 2. Frame > (G.732S) 3. Restoration Time> (CCITT) 4. Clock Source> (Lbt (Local)) 5.
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-22 Configuring Main Link and Voice E1/T1 Ports Idle Code (code transmitt e d to fill unused timeslots in the E1 frames): 00 to ff . 4. From the E1 Parameters menu, choose Time Slot Table to assign the E1 main link to carry the user data (and idle code).
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring Main Link and Voice E1/T1 Ports 4-23 Main Link 1 or Main Link 2 1. Connect > (Yes) 2. Clock Source> (Lbt (Local)) 3. Frame > (Esf) 4. Interface Type> (Csu)) 5.
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-24 Configuring Main Link and Voice E1/T1 Ports 266–399 Fee t 399–533 Fee t 533–655 Feet .
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring Main Link and Voice E1/T1 Ports 4-25 Slot 1 1. Group 1 2. Group 2 @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 4-29. Slot Menu 2. From the Slot menu, select a group to configure.
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-26 Configuring Main Link and Voice E1/T1 Ports Bundle Configuration 1. Add Bundle 2. Delete Bundle 3. Edit Bundle @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 4-32.
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring Main Link and Voice E1/T1 Ports 4-27 Function: TDMoIP Max Bytes In Multiplexed Frame (size of a.
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-28 Configuring Main Link and Voice E1/T1 Ports When operating Vmux-2100 in a TDM networ k (for example, leased line),.
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring Main Link and Voice E1/T1 Ports 4-29 If you intend to change the voice parame ters, it is recommended to disconnect a bundle before configuring it. The bundle must be disconnected at the local and remote sites.
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-30 Configuring Main Link and Voice E1/T1 Ports 2. From the Card menu, select a slot to configure. The Slot menu appears (see Figur e 4-29 ). 3. From the Slot menu, select an E1/T1 group to configure.
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring Main Link and Voice E1/T1 Ports 4-31 7. From the Time Slot Configuration me nu, configure the following par.
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-32 Resetting Vmux-2100 4.8 Restoring Default Settings You can restore default settings of the ex ternal E1/T1 ports.
Application Requirements 5-1 Chapter 5 Configuring Vmux-2100 for a Typical Application This chapter gives detailed instructions for co nfiguring Vmux-2100 for a typical application in which two Vm ux-2100 units operate point-to-point over a TDM network.
Chapter 5 Configuring Vmux-2100 for a Typical Application Vmux-2100 Installation and Operation Manual 5-2 Configuring Vmux-2100 for Operation with CAS Signaling AM 5.
Vmux-2100 Installation and Operation Manual Chapter 5 Co nfiguring Vmux-2100 for a Typical Application AM Configuring Vmux-2100 for Operation with CAS Signaling 5-3 7.
Chapter 5 Configuring Vmux-2100 for a Typical Application Vmux-2100 Installation and Operation Manual 5-4 Configuring Vmux-2100 for Operation with CAS Signaling AM 4.
Vmux-2100 Installation and Operation Manual Chapter 5 Co nfiguring Vmux-2100 for a Typical Application AM Configuring Vmux-2100 for Op eration with CCS Signaling 5-5 1 1 30 voice tim es lots rou ted t.
Chapter 5 Configuring Vmux-2100 for a Typical Application Vmux-2100 Installation and Operation Manual 5-6 Configuring Vmux-2100 for Operation with CCS Signaling AM 5.
Tone Injection 6-1 Chapter 6 Diagnostics This chapter describes the Vmux-2100 di agno stic functions, which include: • Tone injection • Loopbacks (local and remote) • Ping utility. 6.1 Tone Injection The test tone is a data sequence at a rate of 1 kH z.
Chapter 6 Diagnostics Vmux-2100 Installation and Operation Manual 6-2 Tone Injection Diagnostics 1. Inject Tone Test 2. Local Loop Test 3. Remote Loop Test 4. Display Active test 5. Ping @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 6-2.
Vmux-2100 Installation and Operation Manual Chapter 6 Diagnostics Loopback Tests 6-3 6.2 Loopback Tests Vmux-2100 supports activation of the loca l and remote loopbacks. The purpose of these tests is to determine the source of a break in the data flow.
Chapter 6 Diagnostics Vmux-2100 Installation and Operation Manual 6-4 Pinging Remote Devices Remote Loopback Vmux-2100 can activate a remote loopback to test internal connection between the E1/T1 voice port and the main link. In th is mode, data comin g from the network (E1/T1 or IP) is looped back to the network (to the remote side).
Vmux-2100 Installation and Operation Manual Chapter 6 Diagnostics Displaying the Active Tests 6-5 Ping 1. Ip Address ... (0.0.0.0) 2. Number Of Pings [1 - 16]... (1) 3. Activate @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 6-7.
Chapter 6 Diagnostics Vmux-2100 Installation and Operation Manual 6-6 Displaying the Active Tests.
Alarms 7-1 Chapter 7 Monitoring and Statistics Collection This chapter describes the alarms, sani t y checks (configuration errors and warnings), main link and voice modul e statistics supported by Vmux-2100.
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-2 Alarms Status 1. Display 2. Clear 3. Display Sanity @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 7-1. S tatus Menu 3. From the Status menu, choose Display .
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Alarms 7-3 Working with Permanent Buffer The permanent buffer is represen ted by the Alarm Status screen. To access the Alarm St atus screen: • From the Display menu (see Figure 7-2 ), choose Display Alarm Status .
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-4 Alarms Table 7-1. Vmux-210 0 Alarms (Cont.) ID Code Terminal Message Description Severity 43 POWER SUP PLY NO. 2 WAS REMOVED Power supply 2 has been removed from its slot Major 44 FAN No.
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Sanity Checks 7-5 7.2 Sanity Checks Configuration errors and mismatches are rendered by the Vmux-2100 management software as sanity checks. Their main purpose is to maintain the database validity.
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-6 Sanity Checks Sanity Error and Warning List Table 7-2 lists in alphabetical order all sanity errors and warnings generated by Vmux-2100.
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Collecting Statistics 7-7 Table 7-2. Sanity Er ro rs and Warnin gs (Cont.
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-8 Collecting Statistics Main Module Statistics 1. Cpu Utilization 2. Ethernet statistics 3. Hdlc statistics* @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 7-7.
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Collecting Statistics 7-9 Table 7-3. Main Link Ethernet Statistics Values (Co nt.
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-10 Collecting Statistics To clear the main port Ethernet statistics: • From the Ethernet Statistics menu, choose Clear to reset the Ethernet performance registers.
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Collecting Statistics 7-11 Table 7-4. Main Link HDLC Statistics Values Field Description Rx Total Frames Tota.
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-12 Collecting Statistics Calculating the Main Card CPU Utilization When calculating the CPU utilization, Vm.
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Collecting Statistics 7-13 Displaying E1/T1 Group Ethernet Statistics Each E1/T1 group and main link card o f Vmux-2100 is connected to an internal Ethernet bus used for the data transm ission between the modules.
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-14 Collecting Statistics Ethernet Statistics of Slot 2, Group 1 Rx statistics Total Frames :[ 919545] Total.
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Collecting Statistics 7-15 Table 7-5. E1/T1 Gr oup Ethernet Statistics Values Field Description Rx Total Fram.
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-16 Collecting Statistics 3. From the HDLC Statistics menu, choose Group Number> and then enter the desired group num ber from the displayed list to sel ect the group.
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Collecting Statistics 7-17 Displaying the E1/T1 Group Memory Statistics Vmux-2100 estimates the num ber of fr.
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-18 Collecting Statistics To display the bundle st atistics: 1.
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Collecting Statistics 7-19 Table 7-7. E1/T1 Gr oup Bundle Statistics Value s (Cont.
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-20 Collecting Statistics 5. From the Voice Statistics menu, choose Mode .
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Collecting Statistics 7-21 Displaying the Voice Signaling Statistics When operating with the CAS signal ing, Vmux-210 0 transmits signaling information in one of the timeslots.
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-22 Collecting Statistics Calculating the E1/T1 Group CPU Utilization Statistics When calculating the CPU ut.
Ethernet Interface Connector A-1 Appendix A Interface Connector Specifications A.1 E1/T1 Ports Balanced E1/T1 Interface Connector The balanced E1/T1 interfaces of the ma in link and voice modules terminate in RJ-45 connectors. Figure A-1 illustrates location of the pins in t he E1/T1 balanced connector.
Appendix A Interface Connector Specifications Vmux-2100 Installation and Operation Manual A-2 CBL-VMUX-MM-MODEM Cross Cable A.3 CONTROL Connector The control terminal interface terminates in a V. 24/RS-232 9-pin D-ty pe female DCE connector. Table A-3 lists the CO NTROL connector pin assignments.
Vmux-2100 Installation and Operation Manual Appendix A Interface Connector Specifications CBL-VMUX-MM-MODEM Cross Cable A-3 Table A-4. CBL-VMUX-MM-MODE M Cross Cable Wiring MODEM Connector Pin VMUX Co.
Appendix A Interface Connector Specifications Vmux-2100 Installation and Operation Manual A-4 CBL-VMUX-MM-MODEM Cross Cable.
Booting Vmux-2100 B-1 Appendix B Boot Manager and Software Downloading B.1 Introduction This chapter describes the Vmux-2100 boot so ftware and provi des instructions for software downloading via XMODEM or TFTP appl ications. The Vmux-2100 softw are is stored in the Flash memory in two sections: boo t and file system.
Appendix B Boot Manager and Software Downloading Vmux-2100 Installation and Operation Manual B-2 Booting Vmux-2100 Accessing the File System The file system menu is an option that allows the user to perform basic file transfer operations. These operations are all optional.
Vmux-2100 Installation and Operation Manual Appendix B Boot Manager and Software Downloading Downloading the Application and Configuration Software B-3 B.3 Downloading the Application and Configuration Software New application software releases are dist ributed as *.
Appendix B Boot Manager and Software Downloading Vmux-2100 Installation and Operation Ma nual B-4 Downloading the Application and Configuration Software Downloading Application Files via TFTP The application software is download ed when Vmux-2100 has been already completed the boot-up procedure and th e management soft ware is running.
C-1 Appendix C Configuration Menus This appendix lists all menus of the Vmux -2100 management software. 2. Conf igurati on Main me nu 1. Inventory 1. System 1. Man agement 1. Main Boa rd 1. Main Board 2. Slot 1 3. Slot 2 4. Slot 3 5. Slot 4 2. Slot 1 1.
Appendix C Configuration Menus Vmux-2100 Installation and Operation Manual C-2 Ma in menu 3. M onit oring 4. Digno sti cs 1. Status 1. Inject T one T est 2. Local L oop T est 3. Remot e Loop T es t 4. 5. Di spl ay Act i ve T es t Pin g 2. Statistic s 1.
An important point after buying a device RAD Data comm Vmux-2100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RAD Data comm Vmux-2100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RAD Data comm Vmux-2100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RAD Data comm Vmux-2100 you will learn all the available features of the product, as well as information on its operation. The information that you get RAD Data comm Vmux-2100 will certainly help you make a decision on the purchase.
If you already are a holder of RAD Data comm Vmux-2100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RAD Data comm Vmux-2100.
However, one of the most important roles played by the user manual is to help in solving problems with RAD Data comm Vmux-2100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RAD Data comm Vmux-2100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center