Instruction/ maintenance manual of the product 10 SERIES QSC Audio
Go to page of 4
1 WLX0001 rev . B T itle: WideLine rigging hardware torque adjustment Bulletin #: WLX0001 Issue Date: December 15, 2008 Models Affected: WideLine 8 Series and WideLine 10 Series Bulletin Revision: B P.
2 WLX0001 rev . B 4. WL3082 and WL212-sw only: Remove the screws in the rigging bars (three screws on the WL3082; two screws on the WL212-sw). See Figure 3. These screws may have either TORX or Phillips heads. Apply a dab of Loctite QuickStix 248 to the thread at the end of each screw .
3 WLX0001 rev . B 9. WL2102-w and WL218-sw only : Reinstall the screws using a power drill-screwdriver at its lowest torque setting to lightly secure the screws. T orque all of them to 60 in-lb or 7 N-m (Figure 5). Quality review: T esting rigging hardware All models: Rig the boxes together as they will be hung.
4 WLX0001 rev . B Contact information If you need any further information regarding this service procedure, please contact QSC T echnical Services at the addresses or numbers below . T elephone: 1-800-772-2834 (within USA only) +1 (714) 957-7150 Fax: +1 (714) 754-6173 Skype ID: qscaudio E-mail: tech_support@qscaudio.
An important point after buying a device QSC Audio 10 SERIES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought QSC Audio 10 SERIES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data QSC Audio 10 SERIES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, QSC Audio 10 SERIES you will learn all the available features of the product, as well as information on its operation. The information that you get QSC Audio 10 SERIES will certainly help you make a decision on the purchase.
If you already are a holder of QSC Audio 10 SERIES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime QSC Audio 10 SERIES.
However, one of the most important roles played by the user manual is to help in solving problems with QSC Audio 10 SERIES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device QSC Audio 10 SERIES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
