EN
PSC logo
Official user manual

PSC XLR

20 pages·707 KB·Scanner·PDF·ENDEFRITNLJA
PSC XLR
Table of Contents 11 sections Unpacking and Inspecting Your Scanner · Installation · Power Supply · How to Scan · … ShowHide
Page 1 of the PSC XLR user manual — Models SR, HD, LR and XLR
Page 1 · click to enlarge
Page 1

Handheld Bar Code Scanner

Models SR, HD, LR and XLR

PSC XLR — Models SR, HD, LR and XLR diagram (page 1)
Fig. 1 · Models SR, HD, LR and XLR
Page 2 of the PSC XLR user manual — Disclaimer
Page 2 · click to enlarge
Page 2

PSC Scanning, Inc.

959 Terry Street Eugene, Oregon 97402 Telephone: (541) 683-5700 Telefax: (541) 345-7140

All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of PSC Inc. Owners of PSC Inc.’s products are hereby granted non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser’s own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained on this documentation and shall ensure that all notices appear on any reproductions of the documentation.

Should future revisions of this manual be published, you can acquire printed versions by contacting PSC Customer Administration. Elec- tronic versions will either be downloadable from the PSC web site (www.pscnet.com) or provided on appropriate media. If you visit our web site and would like to make comments or suggestions about this or other PSC publications, please let us know via the “Contact PSC” page.

Disclaimer

Reasonable measures have been taken to ensure that the information included in this manual is complete and accurate. However, PSC reserves the right to change any specification at any time without prior notice.

PSC and the PSC logo are registered trademarks of PSC Inc. All other trademarks and trade names referred to herein are property of their respective owners.

Page 4 of the PSC XLR user manual — NOTES
Page 4 · click to enlarge
Page 4

NOTES

Page 5 of the PSC XLR user manual — Unpacking and Inspecting Your Scanner
Page 5 · click to enlarge
Page 5

Unpacking and Inspecting Your Scanner

After unpacking your new scanner, check the contents of the ship- ping carton to ensure all the items you ordered are included:

  • PowerScan ™ handheld scanner
  • Interface Cable
  • Power Supply (if you ordered one)
  • User’s Guide (this manual)
  • Programming Guide
  • Optional Accessories that you ordered. (The PowerScan handheld bar code scanner can be purchased with or without accessory kits.)

If your package contains wrong or missing components, contact your place of purchase. If there are damaged components, immediately file a claim with the carrier. You may want to save your packing material in case you need to ship the scanner at some later time.

Manuals for the PowerScan scanner are available on our website. See the back cover for our web address.

Page 6 of the PSC XLR user manual — Power Supply
Page 6 · click to enlarge
Page 6

Installation

Refer to Figure 1 and follow these steps to install the scanner:

Consult your host terminal manual to determine if power must be turned off before connecting peripheral devices such as the scanner.

1. Should you need to disconnect the interface (I/F) cable from the scanner, loosen the Phillips head screw at the bottom of the handle and rotate the cable restraint clip away from the cable to release it. Reverse this procedure to connect the cable.

Do not attempt to pull the End Cap off, as this may damage the scanner.

CAUTION

2. Connect the I/F cable to the proper port on the host terminal.
3. If your system requires an AC/DC adapter to power the scanner, connect the adapter’s power cord at the I/F connector. (Note: In most cases, the scanner uses Power Off the Terminal [P.O.T.], and does not require this step.) Contact your PSC dealer if you’re not sure if an AC/DC adapter should be used with your system.
4. Connect the AC/DC adapter at the wall outlet. (P.O.T. units skip this step.)
5. Verify operation—point at a flat surface and pull the trigger. A red beam should be visible. Scan a sample bar code and confirm that the scanner reads the bar code by beeping and/ or sending the data to the host terminal.

Power Supply

The scanner requires either a Listed Class 2 or Listed LPS power source which supplies power directly to the scanner.

Page 7 of the PSC XLR user manual — Figure 1. Installing the Scanner
Page 7 · click to enlarge
Page 7

Figure 1. Installing the Scanner

PSC XLR — Figure 1. Installing the Scanner diagram (page 7)
Fig. 2 · Figure 1. Installing the Scanner
Page 8 of the PSC XLR user manual — Figure 2. Scanning Tips
Page 8 · click to enlarge
Page 8

How to Scan

Figure 2 illustrates some tips to help get the best scanning results:

1. The scanner must be pointed at a slight angle to the bar code. Do not hold the scanner perpendicular to the bar code.
2. The laser beam must cross the entire bar code. The scanner cannot correctly read if the entire bar code is not scanned.

Figure 2. Scanning Tips

PSC XLR — Figure 2. Scanning Tips diagram (page 8)
Fig. 3 · Figure 2. Scanning Tips
Page 9 of the PSC XLR user manual — CENTIMETERS
Page 9 · click to enlarge
Page 9

Scanning Range

There are currently four different model types for this scanner. Depending upon the model type of your scanner, you’ll need to hold the unit at a given distance from the bar code to achieve optimum scanning results. The following diagrams provide range of field infor- mation for each of the models when scanning grade A, Code 39 bar codes: Standard Range (SR), High Density (HD), Long Range (LR) and Extra Long Range (XLR).

In the context of the illustration below, a "mil" repre- sents the minimum bar code element width. Mea- surements are based on SR models set with the standard 28° scan width (as opposed to the Half Angle setting of 14°). Reference the PowerScan Pro- gramming Manual (P/N R44-1840) for more informa- tion about the Half Angle feature.

Specifications are subject to change without notice.

Figure 3. Depth of Field (SR)

Depth of Field

Paper Labels (SR decoded model, Code 39)

FRONT OF SCANNER

7.5 mil

1 2 3 4 5

FEET

20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

CENTIMETERS

Show 6 more labels / short text on this page
5 mil · 10 mil · 15 mil · 20 mil · 40 mil · 55 mil
Page 10 of the PSC XLR user manual — INCHES
Page 10 · click to enlarge
Page 10

In the context of the illustration below, a "mil" repre- sents the minimum bar code element width. Mea- surements are based on HD models set with the standard 28° scan width (as opposed to the Half Angle setting of 14°). Reference the PowerScan Pro- gramming Manual (P/N R44-1840) for more informa- tion about the Half Angle feature.

Specifications are subject to change without notice.

Figure 4. Depth of Field (HD)

Depth of Field Paper Labels (HD decoded model, Code 39)

FRONT OF SCANNER

7.5 mil

1 2 3 4 5 6 7 8

INCHES

0 CENTIMETERS 5

Show 6 more labels / short text on this page
3 mil · 4 mil · 5 mil · 10 mil · 20 mil · 10 15 20
Page 11 of the PSC XLR user manual — Depth of Field Paper Labels (LR decoded model, Code 39)
Page 11 · click to enlarge
Page 11
PSC XLR — Scanning Range diagram (page 11)
Fig. 4 · Scanning Range

In the context of the illustration below, a "mil" repre- sents the minimum bar code element width. Mea- surements are based on LR models set with the a 14° scan width (as opposed to the alternate Full Angle setting of 28°). Reference the PowerScan Pro- gramming Manual (P/N R44-1840) for more informa- tion about the Half Angle feature.

Figure 5. Depth of Field (LR)

PSC XLR — Figure 5. Depth of Field (LR) diagram (page 11)
Fig. 5 · Figure 5. Depth of Field (LR)

Depth of Field Paper Labels (LR decoded model, Code 39)

20 30 40 50 60 70 80 90 100 110 120 130 140 150 160

170 180 190 200 210 220 230 240 250 260 270 280

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

670 650 630 610 590 570 550 530 510 490 470 450 430 410 390 370 350 330 310 290 270 250 230 210 190 170 150 130 110 90 70 50 30 10

Page 12 of the PSC XLR user manual — Depth of Field Paper Labels (XLR decoded model, Code 39)
Page 12 · click to enlarge
Page 12
PSC XLR — Scanning Range diagram (page 12)
Fig. 6 · Scanning Range

In the context of the illustration below, a "mil" repre- sents the minimum bar code element width. Mea- surements are based on XLR models set with a 10° scan angle width.

Figure 6. Depth of Field (XLR)

PSC XLR — Figure 6. Depth of Field (XLR) diagram (page 12)
Fig. 7 · Figure 6. Depth of Field (XLR)

Depth of Field Paper Labels (XLR decoded model, Code 39)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

450 400 350 300 250 200 150 100 50

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

1100 1050 1000 950 900 850 800 750 700 650 600 550 500 450 400 350 300 250 200 150 100 50

Page 13 of the PSC XLR user manual — Enhanced Scanning for Hard-to-Read Bar Codes
Page 13 · click to enlarge
Page 13

Active Symbologies

The active (enabled) bar code symbologies in the factory defaults are:

  • Code 39 (C39)
  • Code 128 (C128)
  • Interleaved 2 of 5 (I 2 of 5)

Your scanner should be pre-programmed with these standard factory default settings, unless...

...it was shipped to you programmed with unique, customer con-

figuration settings.

...you or another user have made changes to scanner program-

ming.

Enhanced Scanning for Hard-to-Read Bar Codes

Decoded scanners can be programmed to decode extremely poor quality bar codes by activating advanced Quadralogic™ Decoding. To select this feature, see the PowerScan™ Scanner Programming Guide (P/N R44-1840) available from your dealer, or you can down- load the manual from our website.

Scanner programming can also be performed using your PC and the Configurator Express™ On-Screen Programming tool also available from your dealer.

Page 14 of the PSC XLR user manual — Figure 8. Scanner Labeling
Page 14 · click to enlarge
Page 14

Test Your Scanner

The bar code below (Figure 7) is provided to test your scanner’s abil- ity to read a typical Code 39 label.

Figure 7. Code 39 Bar Code Sample

T e s t

Figure 8. Scanner Labeling

PSC XLR — Figure 8. Scanner Labeling diagram (page 14)
Fig. 8 · Figure 8. Scanner Labeling

Complies with 21CFR 1040 and part 15 of FCC Rules. Applicable patents are listed on label inside unit.

1mw - 650-685nm CLASS 2 LASER PRODUCT Based on 100 sec., EN60825-1/A11:1996

COVERED BY ONE OR MORE OF THE FOLLOWING PATENTS:

  • 4,387,297
  • 4,409,470
  • 4,460,120 4,593,186
  • 4,652,750
  • 4,673,805 4,736,095
  • 4,816,660
  • 4,845,350 4,861,972
  • 4,866,257
  • 4,879,456 5,179,270
  • 5,180,904
  • 5,237,161 5,247,161
  • 5,247,162
  • 5,258,604 5,260,554
  • 5,298,728
  • 5,311,000 5,330,370
  • 5,468,949
  • 5,475,206 5,481,098 Other patents pending
PSC XLR — Figure 8. Scanner Labeling diagram (page 14)
Fig. 9 · Figure 8. Scanner Labeling

Figure 8 above shows label placement ONLY. For actual regulatory, patent and other applicable infor- mation, view the labels on the product itself, or call your nearest sales or service representative.

Page 15 of the PSC XLR user manual — CAUTION
Page 15 · click to enlarge
Page 15

Laser Cautions

The PowerScan bar code scanner is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J for Class II laser products. Class II products are not considered to be hazardous. The scanner contains a Visible Laser Diode (VLD) at a wavelength of 650- 670 nanometers and is designed so that there can be no human access to harmful levels of laser light during normal operation, user mainte- nance, or during prescribed service operations.

If the scan pattern is a single dot when depressing the trigger, discontinue operation and return the unit to the factory. Exception: When using Marker Beam Mode a single aiming dot is projected momentarily.

CAUTION

Do not attempt to open or otherwise service any components in the optics cavity. Opening or servic- ing any part of the optics cavity by unauthorized personnel may violate laser safety regulations.

CAUTION

Radio Frequency Interference

This device complies with Part 15 of the FCC Rules. Operation is sub- ject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numerique de la classe B respecte toutes les exigences du Reglement sur le material broilleur du Canada.

Page 16 of the PSC XLR user manual — Troubleshooting
Page 16 · click to enlarge
Page 16

Troubleshooting

You can isolate problems with your scanning system by performing these checks (refer to Figure 9):

1. If your scanner’s cable is designed to receive Power Off the Terminal (P.O.T.), it will not operate unless it is connected to a working host terminal that is powered on.
2. Ensure that the interface cable is securely attached to the host. Consult your technical support manager or refer to your host system manual to identify the proper connection for the scanner.
3. If an external power supply is used, verify that it is securely connected to the interface cable and AC outlet. Also ensure that the power supply is the correct voltage rating for your area.
4. Check to see that the interface cable is securely connected at the scanner handle. Push the connector in to assure that it is firmly seated. Use a Phillips head screwdriver to ensure that the screw at the bottom of the scanner is fully tightened (but do not overtighten).
5. If, after checking all connections, the scanner still fails to function properly, exchange the power supply with a known good power supply.
6. Ensure that the scanner's interface type is compatible with the host terminal by consulting your POS system manual and/or the PowerScan Scanner Programming Guide (P/N R44-1840).

7. Verify that the bar codes you are scanning are of satisfactory quality. Bar code label verifiers are available from your dealer if you need precise reporting of bar code details. Bar codes that are damaged (wrinkled, smudged, or torn) may cause the scanner to read poorly or not at all. If bar code quality seems to be the problem, check to see if the scanner will read a known good bar code (see Figure 7). You may also want to modify the programmable setting for advanced Quadralogic™ decoding (see the section in this manual titled, Enhanced Scanning for Hard-to-Read Bar Codes).

Page 17 of the PSC XLR user manual — Figure 9. Troubleshooting the Scanner
Page 17 · click to enlarge
Page 17

Figure 9. Troubleshooting the Scanner

PSC XLR — Figure 9. Troubleshooting the Scanner diagram (page 17)
Fig. 10 · Figure 9. Troubleshooting the Scanner

9 9 5 3 1 7 5 7 9 0

Page 18 of the PSC XLR user manual — NOTES
Page 18 · click to enlarge
Page 18

NOTES

Page 19 of the PSC XLR user manual — Directives: EMC 89/336/EEC Low Voltage 73/23/EEC
Page 19 · click to enlarge
Page 19

DECLARATION OF CONFORMITY

PSC hereby declares that the Equipment specified below has been tested and found compliant to the following Directives and Standards:

Directives: EMC 89/336/EEC Low Voltage 73/23/EEC

Standards: EN55022-B EN60825 EN50082-1 EN60950

Equipment

Type: Bar Code Scanning Equipment

Product: PowerScan™ Bar Code Scanner PowerScan™ LR Bar Code Scanner PowerScan™ XLR Bar Code Scanner

PSC XLR — Directives: EMC 89/336/EEC Low Voltage 73/23/EEC diagram (page 19)
Fig. 11 · Directives: EMC 89/336/EEC Low Voltage 73/23/EEC
PSC XLR — Directives: EMC 89/336/EEC Low Voltage 73/23/EEC diagram (page 19)
Fig. 12 · Directives: EMC 89/336/EEC Low Voltage 73/23/EEC

Charles W. Vanlue Director, Corporate Quality PSC, Inc. 959 Terry Street Eugene, OR 97402 U.S.A.

Nigel Davis Vice President Europe, Middle East & Africa PSC Bar Code Ltd. Axis 3, Rhodes Way Watford, England WD24YW UK

Page 20 of the PSC XLR user manual — www.pscnet.com
Page 20 · click to enlarge
Page 20

Asia Pacific PSC Hong Kong Hong Kong Telephone: [852]-2-584-6210 Fax: [852]-2-521-0291

Italy PSC S.r.l. Vimercate (MI), Italy Telephone: [39] (0) 39/62903.1 Fax: [39] (0) 39/685496

Australia PSC Asia Pacific Pty Ltd. North Ryde, Australia Telephone: [61] 0 (2) 9878 8999 Fax: [61] 0 (2) 9878 8688

Japan PSC Japan K.K. Shinagawa-ku, Tokyo, Japan Telephone: 81 (0)3 3491 6761 Fax: 81 (0)3 3491 6656

France PSC Sarl LES ULIS Cedex, France Telephone: [33].01.64.86.71.00 Fax: [33].01.64 46.72.44

Latin America PSC S.A., INC. Miami, Florida, USA Telephone: (305) 539-0111 Fax: (305) 539-0206

Germany PSC GmbH Darmstadt, Germany Telephone: + 49 (0) 61 51/93 58-0 Fax: + 49 (0) 61 51/93 58 58

United Kingdom PSC Bar Code Ltd. Watford, England Telephone: 44 (0) 1923 809500 Fax: 44 (0) 1923 809 505

Corporate Headquarters 675 Basket Road Webster, NY 14580-9787 Telephone: (716) 265-1600 Fax: (716) 265-6400

PSC Scanning, Inc. 959 Terry Street Eugene, OR 97402-9150 Telephone: (541) 683-5700 Fax: (541) 686-1702

www.pscnet.com

PRINTED WITH SOY INK

Printed on recycled paper

© 2000 PSC INC. R44-2094 (Rev. B) Printed in USA (11/00)

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the PSC XLR

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the PSC XLR

Be the first to ask — other owners or our team will answer.

Original document

PSC XLR manual PDF

20 pages·707 KB·Scanner·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…