Instruction/ maintenance manual of the product UPS-200 Powercom
Go to page of 12
U P S Uninterruptible Power System UPS-200/250/400 USER MANUAL 66P-S025-036.
2 TABEL OF CONTENTS 1.IMPORTANT SAFETY INSTRUCTIONS … … … … … … … … … … … … ..1 2.INTRODUCTION … … … ………………… .. … … … … … … … … … … … … … .5 2.1 SYSTEM DESCRIPTION … … … … … … … … … … … … … .
3 1. IMPORTANT SAFETY INSTRUCTIONS, SAVE THESE INSTRUCTIONS 1.1 • This manual contains important instructions for Model UPS series that should be followed during installation and maintenance of the UPS. • Unplug the unit from the AC outlet and make certain of all switches are in the “ off ” position before cleaning.
4 1.2 SAFETY CAUTION: l This unit is should be installed from service personnel. l The equipment can be operated by any individuals with no previous experience. l The socket-outlet shall be installed near the equipment and easily accessible. l Attention, hazardous through electric shock.
5 2.1 SYSTEM DESCRIPTION: This unit is a stand by uninterruptable power supply (UPS.) , it can keep computers or other critical equipments performing through power disturbances and outages. 2.2 FEATURES: • Utilizes microprocessor based controls, minimizes the dependency on hardware, maximizes system flexibility and assures super reliability.
6 UPS-200/250/400 Front Side View UPS-200/250/400 Rear Side View 1 BRAND NAME 2 POWER SWITCH 3 OUTLET SOCKET 4 INLET SOCKET 3 INSTALLATION AND OPERATION 3.
7 This unit can be installed besides the computer or equipment, do not install it in non-ventilated areas. 3.2 Unpacking The following items are included in the carton l User ’ s manual. l Power cord. l UPS 3.3 Connecting the UPS For UPS series: Use the power cord to connect the wall power (utility power) and inlet socket.
8 flash and buzzer will be slowly beeping. 3.4.2 Turn on the computer , if it is over loaded, the LED and buzzer will rapidly flash and beep, you should check the power rating of the loaded equipment then remove the less critical one.
9 A few helpful hints: -Periodically vacuum dust from ventilation openings. -Occasionally wipe exterior with a damp cloth. 5 TROUBLESHOOTING If the UPS fails to operate properly, please check the following TROUBLESHOOGING CHART. If the unit is to be returned for service, please note the following information and pack it in the original carton .
10 1) Unplug unit from AC power source and disconnect all connected equipment. 2) Disconnect AC power cord from unit. 3) Turn unit upside down and using a phillips screws driver, unscrew the 4 screws holding the top of the unit to bottom. Put screws in a safe place for reconnection.
11 charged. Before storing, charger the UPS for at least 4 hours. Remove any accessories in the accessory slot and disconnect any cables connected to the computer interface port to avoid unnecessary draining the battery.
12 Frequency (on battery) 50 or 60 Hz +/-2% Transfer Time 2/4 milliseconds, including detection time Spike Protection 320 joules, 2ms Overload Protection UPS automatic shutdown if overload exceeds 110% of nominal at 60 seconds and 130% at 3 seconds.
An important point after buying a device Powercom UPS-200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Powercom UPS-200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Powercom UPS-200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Powercom UPS-200 you will learn all the available features of the product, as well as information on its operation. The information that you get Powercom UPS-200 will certainly help you make a decision on the purchase.
If you already are a holder of Powercom UPS-200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Powercom UPS-200.
However, one of the most important roles played by the user manual is to help in solving problems with Powercom UPS-200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Powercom UPS-200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center