Instruction/ maintenance manual of the product LS-1000U Posiflex
Go to page of 22
FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications.
FUNDAMENTAL INFORMA TION MODEL NAME : LS - 1000 CONTENT ( Besides this guide) : Fig . 1 Box content besides this g uide INSTALLATION GUIDES 1. Install the USB or RS232 interface cable onto the scanner by inserting the 8 pin RJ45 type modular plug ( Fig.
Description Function Scan Window Reads barcodes Object Detector Trigger and wake up scanner automatically when present ed with barcode in its range Beeper Hole Fo r beep tone indication USING THE SCANNER SCANNER INTRODUCTION Features The scanner unit is a compact and space - saving hands - free omni - directional laser scanner .
Wake up scanner When the scanner enters the sleep mode, pressing this switch can wake the scanner up. The sleep mode feature can be programmed using the menu labels from the Programming Guide. NO TE: The default time - out value is set to 10 minutes after laser sl e p t , 30 minutes after motor slep t .
SCANNER SETUP (PROGRAMMING) In most of the cases no setup is required. The defaul t setup of the scanner makes the scanner able to detect automatically the most commonly applied bar code types as tabulated above and send the data to the host system as if they are read from an USB or RS232 keyboard .
Cover unwanted codes with your hand and present the desired codes, one by one, to the scanner, the scanner beeps once as it accepts each code. When done, again present the < Enter/Exit programming mode > barcode. The scanner beeps twice, once long and once short, and the LED returns to blue.
SCANNER OPERATION Operating the Scanner The scanner read s barcodes in omni - directional scan mode as regular practice. It can also operate in single - line mode for a better aiming on a specific barcode that is printed on a surface with more than one barcode printed closely.
Sleep Mode After the scanner has been inactive for a period of time, the laser automatically turns off; then the motor will turn off and the scanner will enter the “ Sleep Mode ” , the blue status LED keeps blink ing as indication. To wake up the scanner, simply present an object close to the scan window, or press the function button.
Beeper Indications A beeper gives audible feedback on scanner operation. Beeps Indication One bee p A barcode has been successfully decoded. Four beeps in series This indicates the scanner passed the power on self - test and is operating properly. Two beeps: low - high The scanner has entered programming mode.
Page 10 make sure that the scanner is installed as instructed in this manual and that all cables are properly connected. If the problem remains, contact your dealer. Problem Diagnostic Tips The scanner window is dirty. Clean the scanner window as described in the Maintenance section.
The software running on the POS system does not support the data format of the barcode label. Enter/Exit Programming Mode Note: Scan t h is code to enter and exit programming mode. A slightly enlarged image of this code is also printed on the last page of this section for ease of application .
RESET Note: The reading of the “RESET” label turns all the parameters back to default values but leaving the interface mode unchanged. It is suggested to scan also the “ Return to USB default ” or “ Return to RS232 default ” label after this for LS - 1000 scanners.
Message Terminator - Enter Message Terminator - H.tab Message terminator - None International Keyboard (ALT method) Page 13.
Return to customer default Note: The reading of the label will recover all parameter back to customer default . Codabar Enable Save as customer default Codabar Disable Page 14.
Full ASCII COD E 39 Disable Code 39 Enable Code 39 Disable Full ASCII CODE39 Enable Page 15.
UPC/EAN/JAN Disable UPC/EAN/JAN Enable ITF 2 OF 5 Disable ITF 2 of 5 Enable Page 16.
UPC/EAN ADD ON OFF ADD ON 5 only ADD ON 2 only ADD ON 2 or 5 Page 17.
EAN/UPC +Add on (none mandatory) Force UPC - A to EAN - 13 format enable EAN/UPC + Add on (mandatory) Force UPC - A to EAN - 13 format disable Page 18.
EAN - 13 Convert to ISBN/ISSN Enable EAN - 13 Convert to ISBN/ISSN Disable EAN - 128 Enable EAN - 128 Disable Page 19.
Code 128 Enable Code 128 Disable Code 93 Enable Code 93 Disable Page 20.
Chinese Post Code Enable Chinese Pos t Code Disable Code 32 (Italian Pharmacy Code) Enable Code 32 (Italian Pharmacy Code) Disable Page 21.
MSI enable MSI Disable Enter/Exit Programming Mode Page 22.
An important point after buying a device Posiflex LS-1000U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Posiflex LS-1000U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Posiflex LS-1000U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Posiflex LS-1000U you will learn all the available features of the product, as well as information on its operation. The information that you get Posiflex LS-1000U will certainly help you make a decision on the purchase.
If you already are a holder of Posiflex LS-1000U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Posiflex LS-1000U.
However, one of the most important roles played by the user manual is to help in solving problems with Posiflex LS-1000U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Posiflex LS-1000U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
