Instruction/ maintenance manual of the product NAS-7201 Planet Technology
Go to page of 10
2 Bay SA T A NAS RAID Server NAS-7201 Quick Inst allation Guide V ersion 1.0.
T able of Content s 1. OVERVIEW .................................................................................................................. 3 2. P ACKAGE CONTENTS .................................................................................
1. Overview Thank you for purchasing NAS-7201, the 2-bay SA T A RAID NAS server , this guide provides physical inst allation and initial HDD configuratio n for the this NAS RAID Server .
3. Hardware Installation Step 1: Rem ove the Front Case Follow the figure below to release the screws and ope n the front ca se with the direction. Slightly push the front case and lift up the pla stic case.
Step 3: Slide in the HDDs HDD1 HDD2 Gently slide in the SA T A HDD one by one as the figure. When HDD touch the SA T A connector , slightly push the HDD to make it well co nne ct ed to the SA T A interface of the RAID Server Caution Before slide in the HDD, please do make sure the HDD is in the correct direction.
Step 4. Lock the HDD To lock the HDD through two screws so that the HDD can well connected to the NAS server. Step 5 Slide back the side case After the HDD is installed, lock the HDD with screws and slide back the case.
Step 6 Lock the front case Follow the figure below to put back the front case. Be careful for the LED wires. Please align the LED wires to the space between the two HDD and close the case gentley then push with the direction Pull the case back and follow the arrow direction to push the front case.
4. Hardware Connection o n p Step s Description 1 Connect NAS-7201 and a Switch, Hub, Route r , or computer with RJ-45 Ethernet cable. 2 Connect USB p rinte r(s) or USB storage device(s) to this devic e with USB cable(s). NAS-7201 can automatically mount the USB devices connected.
5. Basic Configuration 5.1. Web configuration access The NAS-7201 provides GUI (W eb based, Graphical User Interface) for ma nagement and ad- ministration. The default IP addre ss of NAS server is 192.168.0.100 . Y ou may now open your web browser , and insert http://192.
5.2. HDD Formation and RAID Setting For new atta ched ha rd disk, you shoul d format the HDD before any setting. 1. Go to 『 Maintenance 』 Æ 『 RAI D Setting 』 to configure the server RAID level and File system.
An important point after buying a device Planet Technology NAS-7201 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Planet Technology NAS-7201 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Planet Technology NAS-7201 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Planet Technology NAS-7201 you will learn all the available features of the product, as well as information on its operation. The information that you get Planet Technology NAS-7201 will certainly help you make a decision on the purchase.
If you already are a holder of Planet Technology NAS-7201, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Planet Technology NAS-7201.
However, one of the most important roles played by the user manual is to help in solving problems with Planet Technology NAS-7201. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Planet Technology NAS-7201 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
