Instruction/ maintenance manual of the product DJM-707 Pioneer
Go to page of 16
1 <DRB1353> Operating Instructions DJ MIXER DJM-707.
2 <DRB1353> Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
3 <DRB1353> IMPORTANT NOTICE The serial number for this equipment is located on the bottom plate. Please write this serial number on your enclosed warranty card and keep it in a secure area.
4 <DRB1353> Location Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity. ÷ Do not install the unit in a location which is exposed to direct rays of the sun, or near stoves or radiators. Excessive heat can adversely affect the cabinet and internal components.
5 <DRB1353> CONNECTIONS When connecting or changing the connection of units, make sure to first turn off the power switch and disconnect the power cord from the outlet.
6 <DRB1353> CONNECTIONS F ADER CURVE F ADER ST ART PHONES POWER CROSS F ADER 2 CROSS F ADER 1 CH - 2 CH-1 CH-1 C.F . CH-2 MAX MIN FADER CUT LA G C.F. 1 CH-1 C.F . 2 CH-2 F ADER REVERSE OFF ON OFF ON OFF ON PROFESSIONAL 2CHANNEL MIXER DJM-707 2. Connecting Headphones (front panel) Headphones 3.
7 <DRB1353> PART NAMES AND FUNCTIONS PHONO 1 /LINE 1 + 9 + 12 -12 + 6 -26 + 12 -12 TRIM POWER MIC LEVEL HI LOW MIC SEND SESSION IN F ADER ST ART TRANSFORM MASTER LEVEL REVERSE CH-1 CH-2 CH-1 CH-2 REVERSE FEELING ADJ. LR REVERSE TRANSFORM F ADER ST ART CH-1 F A DER ST ART C.
8 <DRB1353> PART NAMES AND FUNCTIONS 5 CH-1 equalizer dials (HI/MID/LOW) HI Use to adjust CH-1 input treble response (range of adjustment: 13 kHz, +6 dB to – 26 dB). MID Use to adjust CH-1 input midrange response (range of adjustment: 1 kHz, +6 dB to – 26 dB).
9 <DRB1353> PART NAMES AND FUNCTIONS 24 CH-1 fader lever The CH-1 fader lever is used to control the level of signals sent to the cross fader. Signal level is maximum at scale mark “ 10, ” and minimum at scale mark “ 0 ” .
10 <DRB1353> PART NAMES AND FUNCTIONS F ADER CUR VE F ADER ST AR T PHONES POWER CROSS F ADER 2 CROSS F ADER 1 C H - 2 CH-1 CH-1 C.F . CH-2 MAX MIN F ADER CUT LAG C.
11 <DRB1353> PART NAMES AND FUNCTIONS BOOTH/ SESSION OUT CD PHONO / LINE PHONO / LINE PHONO LINE SIGNAL GND RL (MONO) (MONO) MASTER 2 MASTER 1 SEND RETURN CH-2 CD CH-1 MIC PHONO LINE SIGNAL GND .
12 <DRB1353> FADER OPERATIONS Adjusting Fader Lever Operating Sensation Operating load adjust screw (FEELING ADJ.) The supplied hexagonal Allen driver can be used to adjust the hexagonal Allen screw located next to the top panel ’ s cross fader slider opening, thus modifying the sliding resistance of the lever.
13 <DRB1353> FADER OPERATIONS Start playback with channel fader 1 To control a connected CD player, set the front panel FADER START selector switch for the corresponding channel to its [CH-1] or [CH-2] position. When using the CH-1 fader lever to start the CH-1 CD player, set the front panel C.
14 <DRB1353> The power does not turn on. There is little or no sound. Sound is distorted. CD player’s fader won’t start. External effector don’t work. External effector’s sound distorted. ÷ Connect the cord to a power outlet. ÷ Set the Input selector switch to the device currently playing.
15 <DRB1353> Audio Section Input terminal (input level/impedance) CD 1, 2 ....................................... – 14 dBV (200 mV) / 22 k Ω LINE 1, 2 .................................... – 14 dBV (200 mV) / 22 k Ω PHONO 1, 2 ...........
Published by Pioneer Corporation. Copyright © 2003 Pioneer Corporation. All rights reserved. PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. Multimedia and Mass Storage Division: 2265 East 220th Street, Long Beach, CA 90810, U.
An important point after buying a device Pioneer DJM-707 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pioneer DJM-707 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pioneer DJM-707 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pioneer DJM-707 you will learn all the available features of the product, as well as information on its operation. The information that you get Pioneer DJM-707 will certainly help you make a decision on the purchase.
If you already are a holder of Pioneer DJM-707, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pioneer DJM-707.
However, one of the most important roles played by the user manual is to help in solving problems with Pioneer DJM-707. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pioneer DJM-707 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
