Instruction/ maintenance manual of the product NetFly UP4 WN Atlantis Land
Go to page of 121
.
ITALIANO Questo prodotto è co perto da gara nzia Atlantis della durata di 2 anni. Per maggiori dettagli in merito o per accedere alla docume ntazione completa in Italiano fare riferimento al sito www.atlantis-l and.com. ENGLISH This product is covered by Atlantis 2 ye ars warranty.
3 ITALIANO 1. PANORAMICA D I PRODOTT O ............................................................. 11 1.1 Come funzio na la scheda di ret e Wireless .................................... 11 1.2 Requisiti di sistema ...................................
4 1.1 How the Ad apter works ................................ .............................. 52 1.2 System Requ irements ................................................................ . 53 2. PACKAGE CONT ENTS .......................................
5 3.1 Installatio n Sous Win dows .......................................................... 89 3.2 Suppr imer les driv ers et l’uti litaire ................................................ 89 4. INSTALLATION HARDWARE ...............................
6 AVVERTENZE Abbiamo fatto di tutto al fine di evi tare che nel testo, nelle imm agini e nelle tabelle presenti i n questo m anuale, nel software e nell'hardware fossero prese nti degli erro ri . Tuttavia, non possiamo garantire che non siano prese nti errori e/o o missioni.
7 l’installazione, la periferica è stata trovata conforme ai seguenti standard: EN 300.328 (radio), EN 301 48 9-1, EN 301 489 -17(compatibilità elettrom agnetica) ed EN 60950(sicurezza).
8 Importanti i nformazioni per i l corretto ricic laggio/smaltimento di questa app arecchiatura Il simbolo qui sotto i ndicato, ripor tato sull'apparec chiatura elet tronica da Le i acquista ta e.
9 1 Il distributore non sarà tenuto a ritirare l'apparecchiatura elettronica qualora vi s ia un rischio di contaminazione del personale incaricati o qualora r isulti ev idente che l'apparecchiatura in questione non contiene i suoi componenti e ssenziali o contiene rifiuti diversi da apparecchiature elett riche e/o elettroniche.
10 Atlantis invita a visitare il sito we b www.atla ntis-land.com alla relativa pagina di prodotto per reperire m anualistica e contenuti tec nici (aggiornamenti dr iver e/o funzionalità, utility, support note) aggiorn ati.
11 La ringraziamo per aver scelto l’adattatore NetFly Wireless, la via più se mplice pe r il Wireless network ing. Questo manu ale contiene informazio ni de ttagliate in me rito all’installazione e a ll’utilizzo del prodotto, lo utilizzi come rif erimento per qualsiasi problema o inform azione.
12 Se i computer collegati a lla rete wireless devono accedere a riso rse o periferiche condivise sulla rete cablata sarà necessario utilizzare la modalità Infrastructur e . L’ Access Point trasmetter à l e informazioni ai client wireless che potranno muoversi all’interno d i un determ inato ra ggio di azione.
13 1.2 Requisiti di sistema Prima di procedere con l’installazione del pro dotto veri ficare di disporre dei se guenti requisiti: PC con uno slot USB V2.
14 Un Cd- Rom contenente u tility e manuale dell’utente (Italiano, Inglese e Francese) Coupon di Garanzia e WEEE Nel caso i n c ui il c ontenuto non sia quello sovradescritto, contattare il proprio rivenditore imme diatamente. 3 . INSTALLAZIONE SOFTWARE Questa sezione descrive la procedura di ins tallazione dei driver e utility .
15 Laddove il CDRom non dovesse avviarsi automaticament e è possibile laciare il file di avvio l ocalizzato in CDRom:start.h tm. 3.2 Rimozione d ei driver/utilit y Per disinstallare l’ada ttatore W.
16 4.2 Installazio ne modelli USB Terminata l’ins tallazione dei dr iver/utility e collegato l’ adattatore ad una porta U SB il Sistema Operativo pro vvederà ad ins tallare i driver del la nuova periferica.
17 Segnale basso Non connesso e/o e rrore di connession e Dispositivo non rileva to o non presente Per disabilita re l’utility Zero Con figuration di Windows XP, fare riferimento all’appe ndice A.
18 5. RaUI FOR WINDOWS RaUI è l’utility grafic a per la gestio ne e configurazione del dispo sitivo. L’Util ity di config urazione in clude 10 tabs: Profile, Network, Advanc ed, Stati stics, WMM, WPS, CCX, Ra dio On/Off, About and Help.
19 Tramite la pre ssione dei pulsanti Add ed Edit sarà possibilie creare dei nuovi pro fili di connessione opp ure modificare un profilo già esistente. Selezionando un profilo di con nessione esistente, sar à possibile rimuoverlo tramite la pressione del pulsan te Delete .
20 Profile Name: Immettere il nome da assegn are al profilo di con nessione. SSID: Inserire l’SSID del la rete o selezio narlo dal menu a tendina. Power Save Mode: Selezionare la modalità di risp armio ene rgetico tr a CAM (Constant Aw ake Mode) oppure Power Saving M ode.
21 Di seguito verrà ese mplificato come impo stare un profilo di sicurezz a..
22 5.1.1 Configurare un p rofilo WEP Authentication Type : Selezionare Op en o Shared . Encryption Typ e: Selezionare WE P . WEP Key (1-4 ): Inserire le chi avi WEP e selezionare q uella da utilizzare. Hexadecimal/ ASCII: Selezionare il form ato d i inserime nto delle chiavi WEP.
23 Il WEP viene oggi considerata non come assolutamente sicura e pertanto laddove possi bile si consiglia l’uso del WPA. 5.1.2 Configurare un p rofilo WPA -PSK / WPA2- PSK Authentication Type : Selezionare W PA-PSK o WPA2-PS K . Encryption Typ e: Selezionare T KIP o AES .
24 5.2 Network In questa scherma ta è possibile vis ualizzare le reti dispo nibili e visualizzarne i parametri di b ase, c ome la potenz a del segn ale, l a sicurez za adot tata dall a rete, il canale di connessio ne e l’SSID.
25 protetta, potrebbe ess ere nec essaria la cre azione di un nuovo profilo al fi le di impostare i dati per l’acce sso). 5.3 Advanced Wireless mode: Selezionare l a freque nza utilizzata (nel c aso di app arati b/g/n è fissa sui 2.
26 5 .4 Statistics In questa schermata sarà possibile visualizzare le statistiche relative alla connessione di rete corrente, s uddivise per ricezione e trasmissione. Transmit Statistics ( selezionare il t ab Transmit) : Frames Transmitted Successfully: Nu mero di frames trasmessi con successo.
27 Frames Dropped Due To Out - of -Resource: Fr ame s tagliati per mancanza di risorse a llocabili. Duplicate Frames R eceived: N umero di frame duplicati. Cliccare sul buttoner Rese t c ounters to zero per azzerare il contegg io de lle statistiche.
28.
29 5.6 WPS WPS (Wi-Fi Pro tected Set up) è un i nsieme di specifiche pensato per sem plificare la gestione e la messa i n sicurezza delle re ti wireless (per approfondi menti su l funzionamento, cons ultare l’append ice B).
30 Delete: Cancella il pro filo di connessione WP S selezionato. 5.6.1 WPS in modal ità PBC La modalità PBC (Push Bu tton Config) permette all’utente d i configurare la rete wireless tramite l a sola pressione d i un tasto (fisico o vir tuale).
31 5.10 HELP Cliccare per consulta re l’Hel p OnLi ne disponibile in lingua inglese ..
32 6. SUPPORTO OFFERTO Per qualunq ue altro problema o dubbio sul funz ionamento del prodotto, è possibile contattare il se rvizio di assistenza tecnica Atlantis tramite l’apertura d i un ticke t on - line sul portale h ttp://www.atlantis-l and.com/ita/supporto.
33 APPENDICE A: Disabilitare Zero Configuration Di seguito è indica to come disabilitare il servizio Zero Configuration di Windows XP, al fine di poter control lare il dispositivo tramite l’ utilit.
34 APPENDICE B: WPS (Wi-Fi Protected Setup) WPS (Wi -Fi Protec ted Setup) è un insiem e di specifiche mirate a facilitare notevolmente le operazioni di aggiunta di dispositivi alla propria rete wireless e la messa in s icurezza della stessa con la so la pressio ne di un pulsante oppure tramite l’immissione di un codice PIN.
35 sincronizzazione tra AP e client Selezione dell a rete a cui connettersi Inserimento della c hiave di sicurezza per la connessione del clien t.
36 APPENDICE C : AP Mode In questa mo dalità è possib ile trasform are la scheda in un vero e pro prio AP. Per tornare alla modalità client, selezionar e la vo ce Switch to Station Mode e cliccarci sopra.
37 vicini. L’interferenza si verifica quando due o più ca nali si sovrappongono degradando le prest azioni, que s ta sovrapposizione è chiam ata “ Overlap ”. E’ consigliabile mantenere una dist anza di 5 can ali tr a due utilizzati (e s. AP1 posizionato s ul canale 1, AP2 posizionato sul canale 6).
38 AP PENDICE D : Conness ione usando il Client di Windows In Windows XP/Vista e 7 è incluso un client che pe rmette la gestione di un a dattatore wireless al pari de lle Utility. In Windows XP/Vista e 7 è incluso un client che pe rmette la gestione di un a dattatore wireless al pari delle U tility.
39 Windows VISTA Cliccare sull’icon a di rete posizionata sulla System Tray (vedi immagine) e selezionare l’opzione C entro connessi oni di rete e c ondivisione oppure cliccare s u Start -> Pa nnello di Controllo -> C entro conn essioni di rete e condivisi one .
40 Windows XP Fare doppio click sull’icon a di rete posizio nata sulla System Tray (ve di immagine). Selezionare l’ SSID del l a re te desider ata e premere sul pulsante Con netti per avviare la procedur a di connessione.
41 APPENDICE E : Configurazione indirizzo IP in DHCP Client Questo c apitolo fornisce alcune indicazio ni su come impostare l’indirizzo IP alla scheda Wireless usata in modalità DHCP client. Configurazione del PC in Win dows 2000 Anda re su Start/S ettings/Control Pane l .
42 Selezionare l’opzione O ttieni a utomaticament e un indiri zzo IP e successivamente O ttieni indiriz zi server DNS automatica mente . Premere su OK per termi nare la configurazio ne.
43 AP PENDICE F : Risoluzione dei problemi Questo capitolo forn isce alcune soluzioni in me rito ai problemi nei qu ali si potrebbe incor rere duran te l’installazione e l’utilizzo del prodotto. Leggere le seg uenti indicazioni per risolve re eventuali problem i.
44 configurare le impo stazioni della rete senza fili, cliccare quindi su OK. Posso avviare un’ applicazi one d a un computer remoto presente sulla rete wireless? Qu esto dipende d irettamente dal l’applicazione stessa, se è stata progettata per lavo rare in re te (non fa differenza c he sia wire less o cablata) non ci sarà alcun problem a.
45 Cosa è il WEP? WEP è la sigla di Wired Equivale nt Privacy, u n protocollo di sicurezza per le reti locali senza fili (WLAN) definito dallo s tandard 802.1 1b. Cosa è il WPA/WPA2? WPA è la sigla di Wi-F i Protected Access , un protocollo di sicurezza per reti wireless basato su protocollo crittogra fico RC4.
46 release di questa bozza (draft 2.0)..
47 Copyright Stat ement No part of this publication may be reproduced, stored in a retrieval sys tem, or transmitted in any form o r by any means, whether electronic, me chanical, photocopying, reco rding or otherw ise without the pr ior wri ting o f the publisher.
48 CE in which Co untries where the produc t may be used freely: Germany, UK, Italy, Spain, Belg ium, Netherlands, Port ugal, Greece, Ireland, Denmark, Luxembourg, Austri a, Finland, Sweden, No rway and Iceland. France: exce pt the channel 10 through 13, law prohibits the use o f other channels.
49 Russia (CCP): only for indoor application. Declaration of Con formity Hereby We declare that this product is in compliance with the essential requirements and other re levant provisions of Directive “Electrom agnetic Compatibility” and 1999/5/CE within CE Mark ing Require memnt.
50 procedures for the waste of electric and ele ctronic equipments (WEEE). For further and more detailed information, we invite you to visit our website at www.atlanti s -land.com CE Logo with attention Mark ( ) aren’t fully compliant with minimum dime nsions requireme nt to European Directive due to limited sticke r area.
51 Thank you for purchasing the W ireless USB Adapter that provides t he easiest way to wireless networking. This User Manual contains detailed instruct ions in the operation of this product.
52 1.1 How the Adap ter works Ad -hoc Mode: An Ad -hoc netwo rk is a local area network or other small network, especially one with w ireless o r temporary plug -in co nnections, in which som e of the network devices are part o f the netw ork only for the duration of a commu nications session.
53 bandwidth u tilization. Addition ally, the Acce ss Point enables users o n a wireles s LAN to access an existing wired network, allowing wire less users to take advantag e of the wired net works re sources, such as Inte rnet, email, file tr ansfer, and printer sharing.
54 CD -Rom with Utility, Driver and Manual (English, French and Italian) 1 x Warranty Card a nd 1 x WEEE Card If any item is found missi ng or damaged, please contact your local reselle r for replacement. 3. SOFTWARE INSTALLATION This sectio n will lead yo u to install the driver a nd utili ty of the Wirele ss LAN Adapter/Card.
55 3.2 Uninstal lation To unins tall the Wireless U SB/PCI Adapter/Ad apter, go to th e Control Panel of your system. Open the Ad d/Remove Programs . Select the Ral ink Wireless Lan Card in the Add/Remove Programs a nd then click on the R emove .
56 4.2 Hardware Installation for USB Adapat er Please plug the Wireless adapter (only when re quested from OS) to a free US B slot on the PC..
57 4.3 Using the Configuration Utility When the Wireless LAN Adapter was installed, you will see the icon on the Windows task b ar. The user can configure the wire less se ttings using the W ireless Adapter Configuration Utility.
58 icon of will bring up the selectio n window and let user make the selection. Whe n coexisting with WZC, R aConfig only pro vides monitoring function, such as link status, site surveying, statistic co unters and adv ance feature status 5.
59 When use site surve y to make the connect ion, none of profiles will have the connect ion status icon. Click A dd button in order to make a new profile, and click Delete butto n, after choose a profiule, in orde r to erase an e xisting profile.
60 Network Type: Choose network type between Adhoc or Infrastructure . RTS Threshold: Set value by scrolling bar. Fragment Thresho ld: Set value by sc rolling bar. Click on Authentication and S ecurity tab in order to configure wirless security.
61 5.1.1 Configuring WEP security Authentication Type : Select Open o r Shared aut hentication. Encryption Typ e: Select WEP . WEP Key (1-4): Insert WEP keys to use and select w hich one to use for data encryption. Hexadecimal/ ASCII: Select input fo rmat for the key.
62 5.1.2 Configuring WPA-PSK / W PA2-PSK s ecurity Authentication Type : Select WPA-P SK or WPA2-PS K . Encryption Typ e: Select encryp tion type between TKIP or AES . WPA Pre-shared Key: Insert pre-shared key to use between A P and client (8-32 char acters).
63 5.2 Network Under the Network page, system will display the information o f surrounding APs from last sc an resu lt. L ist in formation’s include SSID, Signal, C hannel, E ncryption algorithm, and Network type as picture shown. Rescan: Issue an resc an command to wireless NIC to upd ate information on surrounding wireless network.
64 5.3 Advanced Wireless Mode: Selec t wireless mode (2.4Ghz) Country Region Code : e ight co untries to choose . Co untry ch annel list. Select the country where you are usi ng this Wireless Device , users are responsible for ensuring that the chann el set co nfiguration is in comp liance with the re gulatory standards of these countries.
65 Frames Transmitted Suc cessfully: Frames successfully se nt. Frames Transmitt ed Successfully Without Retry: Frames success fully sent without any retry. Frames Transmitted Successfully After Retry: Frames successfully sent with one or more reties.
66 WMM - Power Save Enable: Enable this function and select power saving mode. Please select which ACs you w ant to enable . Then click Apply button . The setting of enabling WMM – Po wer Save is succ essfully. Direct Link S etup: Th is function will be ready for f uture release of driver.
67 5.6 WPS WPS is a se t o f specifications (supporte d by 802.11n draft) that will help you to configure your network e asily. It exists 2 ways to use WPS: PBC (Push Button Configuration ) mode and PIN mode . WPS AP List: Show a list of APs with WPS support.
68 scan for devices. Set Enrollee mode in Con fig Mode . Click on PBC but ton to start sincronizat ion process between AP and client. Press PCB button on AP. For more informat ions: http://www.wi- fi.org/files/kc_80_2 0070104_Introducing_Wi -Fi_Pro tected_Setup.
69 5.9 About The About section shows the Driver Version, Firmware Version, MAC Addre ss, IP Configuration and t he Utility version. Please see this scree n before download driver upgrade from www.atl antis-land.co m 5.10 Help Click here in order to watch OnLine Help.
70 6. Support For technic al q uestions and support, please c ontact o ur help -desk by ticket on http://www.atlantis- land.com/ita/suppo rto.php . For generic inform ations, please se nd an e-mail to info@atlantis- land.com . For presales inform ations, please send an e-mail to pre vendite@atlantis -land.
71 APPENDIX A: AP Mode Double-click the Wirele ss LAN icon (o r right-click and then select Launch Config Utilities) tand chose Swi tch to AP mo de . With the Wireless USB Adapter utili ty, users can co nfigure a ll the func tions provid ed by the Wireless Monitor Utility.
72 responsible for ensuring that the c hannel se t configuration is in c ompliance with the re gulatory standards of these countries. Please c hek on the Appendix A fore more information. Beacon (ms): The time between two beacons. System def ault is 100 ms.
73 Detail information: MAC Address: The sta tion’s Mac address o f current connection. AID: Raise value by c urrent connection. Power Saving Mo de: The station of curr ent connect whet her it have to support. Event Log Record Soft AP all even t time and message.
74 APPENDIX B : Connect to a network using Windows client MS Windows XP and Windows VISTA /7 can manage the USB /PCI client with its embedded utility for wireless networks; Windows 2000 and MAC OS X re quires an external management utlity ( provided on the CD) to se t and manage the USB/ PCI wireless client.
75 Select the w ireless network S SID and clic k Conn ect . If any wireless network is available, please check that the USB/PCI wireless client is correc tly installed on your PC.
76 APPENDIX C: IP Address in DHCP Client Mode Configuring PC (Windows 20 00) Go to Start / Se ttings / Control Panel . In the Co ntrol Panel, double -click on Network and Dia l-up Connections . Double-click LAN Area Conn ection/Wireless . In the LAN Ar ea Connection /Wireless Status window, click Prop erties .
77 Configuring P C (Windows 7) Go to Start / Control Panel (select Large/Small Icon ). In the Control Panel , double-click o n Network and Sharing Center icon. Click Chang e Adapter S ettings then do uble-click Local Are a Connection/Wirel ess and click Properties .
78 APPENDIX D: Troubleshooting This chapter provides solutions to pro blems that m ay o ccur during the installati on and operation of the WLAN 8 02.11n USB Adapter. Read the descriptions below to solve your problems. QUESTION SOLUTION My computer ca nnot find the Adapt er Make sure the Adapte r has no physical damage.
79 members of the wireless network? Refer to the game’s user g uide for more information. What is Spread Spectrum? Spread Spectrum technology is a wideband radio frequency technique de veloped by the military for use in reliable, secure, mission-critical communications systems.
80 transmitting on ai r? Spectrum technology, it has the inherent security feature o f scrambling. On the softwar e side, WLAN offers the encryptio n function (WEP) to enhance security and acce ss control.
81 megabits per second of the 802.11 g/ b ( Wi - Fi ) standard. Like 8 02.11b/g, 802. 11n o perates i n the 2.4 GHz range a nd is thus compatible with it.
82 Copyright Copyright. 2002 est la propriété de cette société. Tout droits réservé s. Son t interdites, la reproduc tion, la transmiss ion, la transcription, la mémo risation dans un systèm e.
83 Déclaration de Con formité Cet appareil a été t esté et est confo rme à la Directive 1999/5/CE du Parlement européen et du Co nseil concern ant les équipemen ts hertziens et les équipeme nts de terminaux de télécommunicatio ns et l a reconnaissance mutuelle de leur co nformité.
84 Déclaration de Con formité Nous dé clarons que cet appareil a été testé et e st conforme à la Directive 99/ 5/CE du Parlement européen et du Conseil concernan t les équipe ments hertziens et les équipements de terminaux de té lécommunicatio ns et la re connaissance mutuelle de leur conform ité.
85 électriques et électroniques. Pour d e plus amples informations , nous vous invitonsà consulter notre site Internet à l'adresse suivante www.
86 Félicitations pour avoir chois it ceproduit. Ce manuel a é té rédigé pour une utilisation avancée de l’ Adaptateur Wireless USB, le terme Adaptateur s era utilisé dans ce manuel pour désigner c et appareil.
87 connexion avec le dispositif qui fournit le meilleur sign al grâce à la f on ction de roaming. Infrastructure Si le rése au sans f il est de dimension pl us réduite e t que les ressources partagée s sont localisées sur des ordinateur s qui en font partie, il devient possible d’utiliser le mode ad -hoc (Figure 2-2).
88 Ad Hoc L’adaptateur est auss i c apable de fonction ner, dans Windows (s ur 7/Vista et XP ) , comme Point d’Accè s. 1.2 Besoin systè me Avant de commencer l’ installation vérifie z si vous disposez des su ivants requis: PC de sktop avec u n slot USB V 2.
89 2. Contenu de l’emballage Une fois ouvert, vous devriez trouver le s éléments suivants: Adaptateur Wireless NetFly USB o u PCI 2 dBi Ante nne (seulement pour A0 2-PCI-W300N ) Cable .
90 Dans le P anneau de configur ation, cliquez deux fois su r Ajout /Suppression de programmes . Dans l a fenêtre Ajout/Sup pression de pro grammes qui s' affiche, sélectionn ez Ralink Wireless La n Card. Cliquez sur le bouton Modifi er/Supprimer .
91 4.3 Logiciel de configuration Lors de l’i nstallation l ogicielle, en plus des pilotes, une application permettant de configurer rapidemen t la connexion a é té installée. Double cliquez sur l’icône LAN Wireless ( ) ou clic droit puis sélectionnez Launc h Config Util ity pour lancer l’utili taire de co n figuration.
92 Pour l’activation du controle ur de Windows XP chois ir Use Zero Configuration as Config uration Utility. Pour reutiliser le logiciel de Ralink choisir Use RaConfig as Configuration Util ity. Clic droit sur ( ) puis sélectionnez e ntre : Launch Con fig Utility Switc h to AP mode Open Diag nostic Testing Mode Exit 5.
93 Pour créer un nouve au profil il est possi ble d'opérer en 2 mod alités différentes: Cliquer s ur N etwork choisir un un ré seau sans fil (avant cliquer sur Rescan ) et après cliquers sur A dd to Profil e (il faut mettre la clé s i la sécurité est active ).
94 SSID: Le S SID permet d’identifier le Réseau Wireless (WLAN ), il fa ut donc que tous les appareils soient ré glés avec le même SSID pour accéder à ce réseau . PSM: Choisir entre CAM ou PSM. Network T ype: Po ur vo us connec ter à un Po int d’Accè s, ut ilisez le mo de Infrastructure .
95 Autentication and Securi ty : WPA-PSK/WPA2 -PSK: Le WPA-P SK (Wi-Fi Protected Access pre -shared key) est une version simplifiée du WPA qui ne s upporte pas la norme 802.1x et qui nécessite un serve ur RADIUS po ur les co ntrôles d’authentification.
96 chaque fois que l a con nexion e st établie. A ce stade il f aut cl iquer sur le WEP ou 802.11x setting. Shared Key: ave c la même clé WEP e ntre les stat ions, elles s’authentifient par l.
97 5.2 Network Pour voir, sé lectionner et se connecte r à l’un des réseaux Sans -Fils dispo nibles dans l’environnement de tr avail. Cliquer sur ReScan : a ffiche les réseaux S ans- Fils visibles depuis l’Adaptateur. Sélectionnez le rése au désiré puis cli quez sur le bouton Co nnect pour établir une connexion .
98 5.3 Advanced Wireless mode: Po ur sélectionner le type de bande utilisée ( 2.4Ghz) TX Burst: Pour ac tiver la modalité TXB urst (Ralink). Fast Roaming at: Po ur activer le F ast Roaming. Select Your Countr y R egion Code: En France choisir 3 (chenaux 10 - 13).
99.
100 5.5 WMM Il est possible d’activer la fonc tion WMM (Wi -Fi Multi -Media) pour acheminer les informations issues des applica tions en fonction de leur prio rité. Selectionn er WMM Enable et cliquer s ur Apply. WMM - Power Save Enable: Select ionner WMM Power Save Enabl e et après choisir e ntre les 4 choix.
101 5.6 WPS Voir l’Help O nline en Anglais pour plus d’info s ur cette fonction (Cisc o Compatibl e eXtensions). http://www.wi- fi.org/files/kc_80_2 0070104_Introducin g_Wi-Fi_Pro tected_Setup.pdf http://www.wi- fi.org/files/wp_18_20 070108_Wi -Fi_Protected_Setup_WP_ FINAL.
102 5.7 CCX Voir l’Help O nline en Anglais pour plus d’info s ur c ette fonct ion (Cisc o Compatible eXtensions). 5.8 Radio On/ Off Pour activer/ désact iver la section sans fil. 5.9 About Cette fonction vous perme t de voir la v ersion du driver et du Firmw are, l’adresse MAC et la version de l’utili taire de configuratio n.
103 6. Support Pour tous problèmes ou re nseignements vous po uvez contacter le service d’assistence web d’ Atlantis http://www.atlantis- land.com/ita/suppor to.php. Pour avoir des info vous po uvez contacter i nfo@atlantis-l and.com ou prevendite@atlant is-land.
104 APPENDICE A : Configuration de l’adresse IP avec un serveur DHCP dans le réseau Configuration s ous Windows 2000 Allez au Pann eau de Configurat ion . Double-c liquez sur Conn exions Réseau et accès à di stance . Double-cliq uez sur connexio n au réseau local .
105 Configuration sous Windows 7 Allez sur Pann eau de Configuratio n (Gra ndes/Petites icôn es). Double- Cliquez sur Accès Réseau. Cliquer 2 foi s sur C entre Réseau et Partage , puis cliquer sur Mo difier le s paramètres de la c arte. Cliquer 2 fois s ur la carte NIC LAN et cliquez sur P ropriétés .
106 APPENDICE B: Configuration de la connession s ans fi ls en utilisant l’utilitaire de Windows Windows 7 Cliquer sur Start , puis Panneau de Configurati on (Grandes/Petit es icônes). Cliquer 2 fois sur Centre R éseau e t Partag e , puis cliquer sur Gérer les connexions Réseau .
107 APPENDICE C: AP Mode Il est possibile de c hanger l’ Ad aptateur Wireless USB dans un Point d’Accés san fils. Clic dro it sur l’icône LAN Wi reless puis sélectionnez Swi tch to AP mode et après Launch Config Uti lity po ur lancer l’ut ilitaire de configur ation.
108 s’interposent en dégr adant les per formances, c’est l’“Overla p”. On conseille de mainten ir une plage de 5 canaux entre deux utilisés (ex. AP1-canal 1, AP2-c anal 6). Access Control Seuls les clients dont l’ adresse MAC est réglée sur Acce pt peuvent accéder au ré seau wireless.
109 APPENDICE D: Résolution de problèmes Ce chapitre donne q uelques solutions aux problèmes pouvant être renco ntrés lors de l’installation ou l’usage du produit. PROBLEMATIQUE SOLUTION L’ordinateu r ne trouve pas l’ada ptateur USB L’adaptateur n’est pas mécaniquement endommagée.
110 Puis je peux jouer en réseau avec les autres ordinateurs p résents dans le WLAN? Oui, si le jeu est doté de la fonctionnalité multi- joueur en réseau.
111 ISM ? entreprises (par la FCC) qui voulaient développe r des solutions wire less pour un usage professionnel ; elle est gé néralement caractérisée par le sigle ISM band (Indus trial, Scie ntific and Me dical ). Sur cette fréquence ne travaillent que des dispositifs industriel, scientifiq ue et médical à basse puissance.
112 APPENDIX A : Country Channel List For so me Euro pean Country, it m ay have its own dom ain; users are respon sible for ensuring that the c hannel set configura tion is in compliance with the regulatory standards of these countries.
113 Hungary 1 CH1~13 Iceland 1 CH1~13 India 1 CH1~13 Indonesia 1 CH1~13 Ireland 1 CH1~13 Israel 1 CH1~13 Italy 1 CH1~13 Japan 5 CH1~14 Japan2 4 CH14~14 Japan3 1 CH1~13 Jordan 1 CH1~13 Kuwait 1 CH1~13 .
114 Poland 1 CH1~13 Portugal 1 CH1~13 Puerto Rico 0 CH1~11 Romania 0 CH1~11 Russia 1 CH1~13 Saudi Arabia 0 CH1~11 Singapore 1 CH1~13 Slovakia 1 CH1~13 Slovenia 1 CH1~13 South Africa 1 CH1~13 South Kor.
115 APPENDIX B: Technical Specifications Technical Sp ecs Code A02-PCI- WN Standards IEEE 802.11 b/g/n Chipset RaLink ® RT2760(2760 +2720) Interface PCI 32bit LED 2 (Link, ACT) WPS Yes (Software) Ant.
116 Temperature Rang e Operation: 0°C ~ 40 °C Storage: -10°C ~ 60 °C Humidity 10% ~ 75% (non Conden sing) Continuos Current Consumption 220mA (Tx), 38 0mA (Rx) System Requiremen ts PC with ava.
117 Technical Sp ecs Code A02-UP1- WN (V1.2) Standards IEEE 802.11 b/g/n Chipset RaLink ® RT3070 Interface USB V2.0/V1.1 LED 1 STATUS WPS Yes (HW button) Antenna Internal Striped A ntenna Advanced Features AP Mode on Windows 7/Vista/XP WMM Direct Link Setup Frequency Band 2412 ~ 2483 MHz Radio Technolo gy IEEE 8 02.
118 Storage: -10°C ~ 60 °C Humidity 10% ~ 75% (non Condensin g) Continuos Cu rrent Consumption 280mA (Tx), 410m A (Rx) System Requiremen ts PC with available US B V2.
119 Technical Sp ecs Code A02- UP -W 300 N (V1 .2) A02-UP4-W300N Standards IEEE 802.11 b/g/n Chipset RaLink ® RT3072 RaLink ® RT2870 Interface USB V2.
120 Temperature Rang e Operation: 0°C ~ 32°C Storage: -10°C ~ 6 0°C Humidity 10% ~ 75% (non Condensin g) Continuos Current Consumption 290mA (Tx), 440m A (Rx) System Requiremen ts PC with available US B V2.
Atlantis SpA Via S. Antonio, 8/10 20020 Lainate (MI) info@atlantis-land .com.
An important point after buying a device Atlantis Land NetFly UP4 WN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Atlantis Land NetFly UP4 WN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Atlantis Land NetFly UP4 WN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Atlantis Land NetFly UP4 WN you will learn all the available features of the product, as well as information on its operation. The information that you get Atlantis Land NetFly UP4 WN will certainly help you make a decision on the purchase.
If you already are a holder of Atlantis Land NetFly UP4 WN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Atlantis Land NetFly UP4 WN.
However, one of the most important roles played by the user manual is to help in solving problems with Atlantis Land NetFly UP4 WN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Atlantis Land NetFly UP4 WN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
