EN
Phase Technology logo
Official user manual

Phase Technology HP8i

4 pages·334 KB·Portable Speaker·PDF·ENDEFRITNLJA
Phase Technology HP8i
Table of Contents 2 sections HP8i HP8i High-Power Speaker Technical Information for System Engineers · Frequency Response Frequency Response (unequalized) ShowHide
Page 1 of the Phase Technology HP8i user manual — HP8i HP8i High-Power Speaker Technical Information for System Engineers
Page 1 · click to enlarge
Page 1

HP8i HP8i High-Power Speaker Technical Information for System Engineers

Phase Technology HP8i — HP8i HP8i High-Power Speaker Technical Information for System Engineers diagram (page 1)
Fig. 1 · HP8i HP8i High-Power Speaker Technical Information f…

Key Features Key Features • High-SPL, high-efficiency system for the sound reinforcement and PA markets.

  • BroadBeamHP ® coverage pattern providing smooth response and high SPL across the audio spectrum.
  • One 203 mm (8.0 in) concentric coaxial coated fiber driver, 25 mm (1.0 in) compression driver with a 50 mm (2.0 in) titanium diaphragm.
  • Weatherized components and sealed input panel for indoor/outdoor applications.
SpecificationsHP8i-T64 HP8i-SM-T64 Specifications: HP8i-T64 HP8i-SM-T64

System Type 8” 2-way high-power ported (64 Watt transformer or 70.7/100 Volt applications with voice coil/8 Ohm direct) Frequency Response (-3 dB)1 88 Hz – 15 kHz Low Frequency (-10 dB)1 52 Hz – 17 kHz Max. Program Power 250 W Max. Continuous Power RMS2 125 W Max. SPL dB @ 1M 116 dB Sensitivity dB @ 1W/1M3 95 dB Impedance 8 Ohm (nominal value) Tap Selector Selectable via barrier terminal strip

  • Switchable dual input option for either voice coil/8 Ohm direct or 70.7/100 Volt applications.
  • Multiple installation hardware options for overhead and surfacemount applications.
  • Integrated hanging and safety cables for easier and cleaner-looking installs.
  • Fine black or white paint finish.

70.7 V Output 100 V Output 64 W 113 dB n/a n/a 32 W 110 dB 64 W 113 dB 16 W 107 dB 32 W 110 dB 8 W 104 dB 16 W 107 dB

The SoundTube HP8i is a premium 2- way low-profile, high-efficiency, high-SPL speaker with BroadBeamHP® technology providing a wide dispersion pattern for the sound reinforcement and PA markets.

Coverage Angle (-6 dB @ 2 kHz) 115˚ Coverage Angle (-6 dB @ 8 kHz) 90˚ Directivity Factor (Q) 4.04 (100 Hz to 10 kHz averaged) 6.07 @ 2 kHz Directivity Index (DI) 5.21 dB (100 Hz to 10 kHz averaged) 7.83 dB @ 2 kHz

The HP8i is engineered for installations requiring full-range background/fore- ground music plus paging. A smooth and even coverage pattern makes the HP8i an ideal choice for use in warehouses, gyms, aerobic rooms, super stores, theme parks and other open-ceiling or outdoor applications where high SPL is required.

Transducers Low Frequency Driver 1 x 203 mm (8.0 in) concentric coaxial coated fiber driver High Frequency Driver 1 x 25 mm (1.0 in) compression driver with a 50 mm (2.0 in) titanium diaphragm Crossover Frequency 1.8 kHz

Network Type Low Pass 12 dB per octave, 2nd order High Pass 18 dB per octave 3rd order with protection circuitry Inputs Corrosion-resistant gold-plated barrier strips Enclosure Material Engineered glass-fiber reinforced composite Colors Black or white Diameter 316 mm (12.43 in) Length 405 mm (15.95 in) Net Weight 10.71 kG (23.6 lbs)

Cast Composite Enclosure Cast Composite Enclosure

SoundTube’s HP8i cast composite enclo- sure provides a low-resonance platform with effective self-damping properties for a clean, tight sound. Compression cast glass-fiber composite material coupled with SoundTube’s patented ZeroReflection™ internal shaping provides extreme stiffness, eliminating internal standing waves and external diffraction distortions. The result is accurate sound and tight bass in a com- mercial speaker.

Accessories Optional See installation options on back page

Te Technical Data chnical Data

1 Frequency response is measured in full space. 2 Continuous power rating, EIA-426-B test. 3 2.83 Volts at a distance of 1 meter.

SoundTube Entertainment strives to pro- vide complete and effective technical infor- mation and data to dealers, engineers and

SoundTube continually develops new product innovations and improvements. Updates to existing products without prior notice are an example of SoundTube’s drive for constant improvement.

© 2004 SoundTube Entertainment, Inc. All rights reserved. REV 07.20.05

Transformer Taps · Applications Applications

Page 2 of the Phase Technology HP8i user manual — Frequency Response Frequency Response (unequalized)
Page 2 · click to enlarge
Page 2

HP8i HP8i High-Power Speaker Technical Information for System Engineers

Frequency Response Frequency Response (unequalized)

designers. All data are available from SoundTube Entertainment or at www.soundtube.com

Phase Technology HP8i — Frequency Response Frequency Response (unequalized) diagram (page 2)
Fig. 2 · Frequency Response Frequency Response (unequalized)

Technical data and downloads include:

Tech Sheets – Technical information and architectural specs for system engineers.

SPL, 1W, 1M (dB)

Da Data Acquisition ta Acquisition

All performance data acquired at SoundTube’s Technical Measurement Center (TMC) are analyzed using standardized mea- surement techniques, including Measured Length Sequence (MLS) and Time Delay Spectrometry (TDS). Performance, develop- ment, and data acquisition tools include: Gold Line TEF 20 Suite, CLIO, LMS, LEAP, and proprietary modeling software.

Frequency Response on-axis in full space (4π).

Da Data for Other SoundTube ta for Other SoundTube Products Products Also available: Sales & installation information for all SoundTube speaker systems, including open ceiling, in-ceil- ing, surface-mount, in-ground and sound- focusing speakers.

Impedance Response Impedance Response

Phase Technology HP8i — Frequency Response Frequency Response (unequalized) diagram (page 2)
Fig. 3 · Frequency Response Frequency Response (unequalized)

Architectural Specifications rchitectural Specifications

The loudspeaker shall consist of one 203 mm (8.0 in) concentric coaxial coated fiber driver, 25 mm (1.0 in) compression driver with a 50 mm (2.0 in) titanium dia- phragm, and a frequency-dividing network installed in a dual-ported enclosure. The low-frequency voice coil diameter shall be 50 mm (2.0 in).

Performance specifications of a typical production unit shall be as follows: Usable frequency response shall extend from 52 Hz – 17 kHz. The loudspeaker shall be available with a switchable transformer/8 Ohm input, and shall be equipped with corrosion-resistant gold-plated barrier strips for both impedance modes. Taps shall be nominally 8 W @ 70.7 V (16 W @ 100 V), 16 W @ 70.7 V (32 W @ 100 V), 32 W @ 70.7 V (64 W @ 100 V) and 64 W @ 70.7 V (tap position not used @ 100 V). The frequency-dividing network shall have a crossover frequency of 1.8 kHz. Rated power capacity of the components and net- work shall be at least 125 Watts continuous RMS power.

Phase Response Phase Response

Phase Technology HP8i — Frequency Response Frequency Response (unequalized) diagram (page 2)
Fig. 4 · Frequency Response Frequency Response (unequalized)

The enclosure shall be constructed of a glass-fiber reinforced composite for maxi- mum performance. The grille shall be con- structed of UV-resistant ABS plastic material.

Technical data, EASE™ plots, SoundTubeSPEC™ software & product downloads available at www.soundtube.com

Frequency (Hz)

Page 3 of the Phase Technology HP8i user manual — HP8i HP8i High-Power Speaker Technical Information for System Engineers
Page 3 · click to enlarge
Page 3

HP8i HP8i High-Power Speaker Technical Information for System Engineers

Horizontal One Octave Polars Horizontal One Octave Polars

125 Hz 125 Hz

Phase Technology HP8i — HP8i HP8i High-Power Speaker Technical Information for System Engineers diagram (page 3)
Fig. 5 · HP8i HP8i High-Power Speaker Technical Information f…
Phase Technology HP8i — HP8i HP8i High-Power Speaker Technical Information for System Engineers diagram (page 3)
Fig. 6 · HP8i HP8i High-Power Speaker Technical Information f…

250 Hz 250 Hz

500 Hz 500 Hz

Phase Technology HP8i — HP8i HP8i High-Power Speaker Technical Information for System Engineers diagram (page 3)
Fig. 7 · HP8i HP8i High-Power Speaker Technical Information f…
Phase Technology HP8i — HP8i HP8i High-Power Speaker Technical Information for System Engineers diagram (page 3)
Fig. 8 · HP8i HP8i High-Power Speaker Technical Information f…

1,000 Hz 1,000 Hz

Phase Technology HP8i — HP8i HP8i High-Power Speaker Technical Information for System Engineers diagram (page 3)
Fig. 9 · HP8i HP8i High-Power Speaker Technical Information f…
Phase Technology HP8i — HP8i HP8i High-Power Speaker Technical Information for System Engineers diagram (page 3)
Fig. 10 · HP8i HP8i High-Power Speaker Technical Information f…

4,000 Hz 4,000 Hz

Technical data, EASE™ plots, SoundTubeSPEC™ software & product downloads available at www.soundtube.com

Page 4 of the Phase Technology HP8i user manual — HP8i HP8i High-Power Speaker Technical Information for System Engineers
Page 4 · click to enlarge
Page 4

HP8i HP8i High-Power Speaker Technical Information for System Engineers

Mechanical Drawings Mechanical Drawings Installation for the HP8i shall be by a single hanging aircraft cable with a 1/4-20 stud into threaded insert on rear input panel. The HP8i-SM model shall include a Surface Mount Bracket kit constructed of 12-gauge cold rolled steel (CRS) with electrostatic paint. A safety cable shall be included as a seismic and safety redun- dancy system on both models. The external wiring input connectors shall be barrier- terminal strip and shall accept from 16 – 22 gauge wire (or wire of any size using a blade terminal input). Overall cabinet dimen- sions shall be no more than 316 mm (12.43 in) in diameter, by 405 mm (15.95 in) in length, and weigh no more than 10.71 kG (23.6 lbs).

405 mm (15.95 in) 405 mm (15.95 in)

The system shall be the SoundTube HP8i for both low and high impedance.

316 mm (12.43 in) 316 mm (12.43 in)

SoundTube Entertainment SoundTube Entertainment 6430 North Business Park Loop Park City, Utah 84098 Phone 435.647.9555 Fax 435.647.9666 Toll Free 800.647.TUBE www.soundtube.com

Installation Options Installation Options

482.6 mm (19.00 in) 482.6 mm (19.00 in)

All SoundTube products come All SoundTube products come with a 5-year limited warranty with a 5-year limited warranty.

Hanging/Safety Cable with SpeedClamp™

HP8i-SM Surface-Mount speaker system

Optional Accessories Optional Accessories

(not shown) AC-CC-10 – 10’ adjustable Combi-Cable AC-CC-20 – 20’ adjustable Combi-Cable AC-HK-10 – 10’ hanging cable AC-HK-20 – 20’ hanging cable AC-BC1 – Beam Clamp AC-SL1 – Snap Link AC-FE1 – Forged Eyebolt AC-HP8-GC – Protective Sports Cage Grille

  • SoundTube Entertainment manufactures a complete line of speakers for: Open-Ceiling
  • In-Ceiling
  • Surface-Mount
  • Outdoor
  • Sound-Focusing Open-Ceiling
  • In-Ceiling
  • Surface-Mount
  • Outdoor
  • Sound-Focusing

All SoundTube products are designed and engineered in the

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Phase Technology HP8i

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Phase Technology HP8i

Be the first to ask — other owners or our team will answer.

Original document

Phase Technology HP8i manual PDF

4 pages·334 KB·Portable Speaker·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…