Instruction/ maintenance manual of the product C-110-XXXXX Perle Systems
Go to page of 20
P/N 5500307-15 Perle 10/100 Ethernet Media Convert er Module Installation Guide C-110-XX XXX Unm anaged Module CM-110-XX XXX Managed Modu le.
Perle 10/100 Media Converter M odule – Installation Guide 2 Over vie w This docum ent contains instructions n ecessar y for the instal lation and operation of the Perle 10/1 00 Ethernet M edia Con verter Modul e(s) (C- 110 and CM-11 0) that are us ed in conjunc tion with a P erle MCR Ch assis.
Perle 10/100 Media Converter M odule – Installation Guide 3 Installatio n The m odule comes equi pped with a ba nk of DIP switches an d jum pers for setting conf iguration. The default d ip switch set tings (all s witches in the UP position) and default jum per settings will work for mos t installations.
Perle 10/100 Media Converter M odule – Installation Guide 4 Auto-Config Jumper (CM-110 only ) The Auto-Co nfig jum per (J6) is located jus t belo w the Auto-MDIX jumper ( see above). Ref er to the diagram below f or labelling. T his jumper onl y applies to CM- 110 m odules.
Perle 10/100 Media Converter M odule – Installation Guide 5 DIP Switches DIP Switch Settings Auto Negoti ation (Sw itch 1) Switch Posit ion Mode Up (defau lt) Auto Down Off Note: Auto ne gotiation s.
Perle 10/100 Media Converter M odule – Installation Guide 6 Converter M odule will be determ ined by the Du plex (switch 4) and Speed (s witch 5) dip s witch settings .
Perle 10/100 Media Converter M odule – Installation Guide 7 fiber link on either the tra nsm it or receive line will b e passed throu gh to the local co pper connec tion thus notifying the c onnected de vice.
Perle 10/100 Media Converter M odule – Installation Guide 8 Duplex (copp er) (Sw itch 4) Switch Posit ion Mode Up (defau lt) Full Down Half Note: W hen Auto Negoti ation (SW 1) is set to Of f, the Media Converter will use this D uplex settin g for its copp er connectio n.
Perle 10/100 Media Converter M odule – Installation Guide 9 Duplex (fiber) ( Swit ch 6) Switch Posit ion Mode Up (defau lt) Full Down Half Up: T he Media Converter Module’s f iber link wil l be set to F ull Duplex Mode. Dow n: The Media Conv erter Module’s f iber will be s et to Half D uplex Mode.
Perle 10/100 Media Converter M odule – Installation Guide 10 Installing or Replacing Media Converter Modules Caution: O bserve electro static dis charge precau tions wh en installing the Media Con verter Module(s) into th e Chassis. Failure to obs erve this caution co uld result in d amage to t he Media Convert er M odul e(s) and /o r chassis.
Perle 10/100 Media Converter M odule – Installation Guide 11 6. Tighten the ca ptive retai ner scr ew to ensure the Me dia Converter M odule is loc ked in place . 7. Rem ove the dust cap f rom the fiber c onnector and connect th e fiber and copp er cables .
Perle 10/100 Media Converter M odule – Installation Guide 12 • Connect the fiber cable f rom one Medi a Converter M odule to the other Media C onverter/s witch/f iber device. Installing the Copper Cable • Locate 10/100 Base-T compliant copper c ables with male, RJ- 45 connectors installed at both ends .
Perle 10/100 Media Converter M odule – Installation Guide 13 Operation Status LED The Perle 10/ 100 Etherne t Media C onverter Mod ules have six s ingle color status LEDs located on t he face plate of the m odule. PWR On – Power is on; mod ule is operating normal ly Blinking (slow ) – The module is in Loopback mode .
Perle 10/100 Media Converter M odule – Installation Guide 14 Other Features Auto-M DIX: Auto-MDIX ( autom atic medium- dependant interf ace crossover) detects the s ignalling on the 10/100 BASE-T interface to det erm ine the type of c able connec ted (straight-thr ough or cros sover) and automatical ly configures t he conn ection.
Perle 10/100 Media Converter M odule – Installation Guide 15 Troubleshooting General • Ensure that the Me dia Converter Module is s ecurely s eated in the chassis. T he PWR LED s hould be on. • Ensure both devices on either end of the fib er are com patible.
Perle 10/100 Media Converter M odule – Installation Guide 16 Method 2: The f iber connection ca n also be verified b y configuring the r emote Media Con verter for loop back m ode. The LKF L EDs on both Media Con verters should be lit. Data s hould pas s through t he local converter, o ver the fiber co nnection to th e rem ote Media Converter.
Perle 10/100 Media Converter M odule – Installation Guide 17 Technical Specifications Power Inpu t/Consumpt ion 12V DC / 2.1 W Operating T emperatur e: 0 °C to 50 °C (32 °F to 122 ° F) Storage T.
Perle 10/100 Media Converter M odule – Installation Guide 18 C-110-S2ST120 CM-110-S2ST120 S M TX: 1550 RX: 1550 M in: 0 Max: 5 Min: -35 Max: 0 35 C-110-S2LC120 CM-110-S2LC120 SM TX: 15 50 RX: 1550 M.
Perle 10/100 Media Converter M odule – Installation Guide 19 Compliance Information FCC This product has been found to comply with the li mits for a Class A digital device, pursuant to Part 15 of the FCC rules.
Perle 10/100 Media Converter M odule – Installation Guide 20 Warranty / Reg istration Perle’s stan dard Lifetim e Warrant y provides cus tomers with r eturn to factor y repa irs for Perle products that fail under the condit ions of the warrant y coverage.
An important point after buying a device Perle Systems C-110-XXXXX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Perle Systems C-110-XXXXX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Perle Systems C-110-XXXXX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Perle Systems C-110-XXXXX you will learn all the available features of the product, as well as information on its operation. The information that you get Perle Systems C-110-XXXXX will certainly help you make a decision on the purchase.
If you already are a holder of Perle Systems C-110-XXXXX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Perle Systems C-110-XXXXX.
However, one of the most important roles played by the user manual is to help in solving problems with Perle Systems C-110-XXXXX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Perle Systems C-110-XXXXX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
