Instruction/ maintenance manual of the product C-100-XXXXX Perle Systems
Go to page of 19
P/N 5500306-15 Perle Fast Ethernet Media Con verter Modul e Installation Guide C-100-XX XXX Unm anaged Module CM-100-XX XXX Managed Mo dule.
Fast Ethernet Media Converter – Installation Guide 2 Over vie w This docum ent contains instructions n ecessar y for the ins tallation and operation of the Perle Fast Ethernet Media Convert er Module(s) (C-100 and CM-10 0) that are us ed in conju nction with a P erle MCR Ch assis.
Fast Ethernet Media Converter – Installation Guide 3 Installatio n The m odule comes equi pped with a ba nk of DIP switches an d jumpers for setting conf iguration. The default DI P switch sett ings (al l switches in the UP posit ion) and jum per settings will work f or most installatio ns.
Fast Ethernet Media Converter – Installation Guide 4 Auto-Config Jumper (CM-100 only ) The Auto-Co nfig jum per (J6) is located j ust belo w the Auto-MDIX jumper ( see above). Ref er to the diagram below f or labelling. This jum per only applies to CM-100 m odules.
Fast Ethernet Media Converter – Installation Guide 5 DIP Switches DIP Switch Settings Auto Negoti ation (Sw itch 1) Switc h Position Mode Up (defau lt) Auto Down Off Auto : In this mode of operation the Me dia Conv erter Module will negotiate Ethernet param eters on th e copper conn ection.
Fast Ethernet Media Converter – Installation Guide 6 Link M ode (Switch 2) Switch Position Mode Up (defau lt) Link Pass- Through Mode Down Standard Mo de Link Pass-T hrough: In this mode, the link state on one connec tion is directly reflecte d throug h the Media Co nverter Mo dule to the ot her connection.
Fast Ethernet Media Converter – Installation Guide 7 If the Media C onverter has been set to Link Pas s-Thr ough mode, the effec t will be the sam e as FEF, since the link loss on the fiber r eceiver will bring do wn the copp er link, which will in turn c ause the tra nsm it fiber link to be brought d own.
Fast Ethernet Media Converter – Installation Guide 8 Unused (Sw itch 4) Pause (Sw itch 5) Switch Position Mode Up (defau lt) Enabled Down Disabled Enabled: W hen Auto Neg otiation has been set to Auto (SW 1), the Media Con verter Modul e will use this s etting for its Ethernet param eter negotiation o n the copper connection.
Fast Ethernet Media Converter – Installation Guide 9 Installing or Replacing Media Converter Modules Caution: O bserve electro static dis charge precau tions w hen installing the Media Con verter Module(s) into t he Chassis. Failure to obs erve this caution co uld result in d amage to the Module(s ) and/or chassis.
Fast Ethernet Media Converter – Installation Guide 10 7. Rem ove the dust cap f rom the fiber c onnector and connec t the fiber and c opper cabl es. Removing Media Convert Modules 1. Loosen the c aptive reta iner screw on th e front of the Media Converter M odule and ge ntly pull the m odule ou t.
Fast Ethernet Media Converter – Installation Guide 11 Installing the Simplex Fiber Cable • Locate a 1 00Base-X compliant sim plex (1 stran d) fiber cable with appropr iate connector s. • Connect the fiber cab le from one Media Converter Module to another Medi a Converter/s witch/f iber device.
Fast Ethernet Media Converter – Installation Guide 12 Operation Status LED The Perle F ast Ethernet M edia Conv erter m odules have three single color s tatus LEDs located on th e face plate of the m odule. PWR - Pow er/Test • On : Power is on, m odule operating norm ally.
Fast Ethernet Media Converter – Installation Guide 13 Other Features Auto-M DIX: Auto-MDIX ( autom atic medium -dependant inter face) detects the signalling on the 100B ASE-T interface to deter mine the t ype of cable connect ed (straight- through or c rossover) a nd automatical ly configures t he conn ection.
Fast Ethernet Media Converter – Installation Guide 14 Troubleshooting General • Ensure the m odule is corr ectly seated to the bac kplane in the MCR Chass is. The PW R LED should be on solid. • Ensure both devices on either end of the fiber are compatible.
Fast Ethernet Media Converter – Installation Guide 15 Method 2: The f iber connection ca n also be verified b y configuring the rem ote Media Converter for loopback mode. T he LKF LEDs o n both Media C onverters should be lit. Data sho uld pass through the local con verter, over the fiber conn ection to th e rem ote Media Con verter.
Fast Ethernet Media Converter – Installation Guide 16 Technical Specifications Power Inpu t/Consump tion 12V DC / 2.0 W Operating T emperatur e: 0 ° C to 50 ° C (32 ° F to 122 ° F) Storage Tem p.
Fast Ethernet Media Converter – Installation Guide 17 C-100-S2SC120 CM-100-S2SC120 SM T X: 1550 RX: 1550 Min: 0 Max: 5 Min: -35 Max: -3 35 C-100-S2ST120 CM-100-S2ST120 SM TX: 1550 RX: 1550 Min: 0 Ma.
Fast Ethernet Media Converter – Installation Guide 18 Compliance Information FCC This product has been found to comply with the li mits for a Class A digital devi ce, pursuant to Part 15 of the FCC rules.
Fast Ethernet Media Converter – Installation Guide 19 Warranty / Reg istration Perle’s stan dard Lifetim e Warrant y provides cus tomers with return to f actory repairs f or Perle pro ducts that f ail under the conditions of the warrant y coverage.
An important point after buying a device Perle Systems C-100-XXXXX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Perle Systems C-100-XXXXX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Perle Systems C-100-XXXXX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Perle Systems C-100-XXXXX you will learn all the available features of the product, as well as information on its operation. The information that you get Perle Systems C-100-XXXXX will certainly help you make a decision on the purchase.
If you already are a holder of Perle Systems C-100-XXXXX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Perle Systems C-100-XXXXX.
However, one of the most important roles played by the user manual is to help in solving problems with Perle Systems C-100-XXXXX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Perle Systems C-100-XXXXX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
