Instruction/ maintenance manual of the product C2432M-A Pelco
Go to page of 8
DF5HD Series Heavy-Duty Fixed-Mount Dome Installation Manual C2432M-A (12/03) ® P elco • 3500 P elco Wa y • Clovis , CA 93612-5699 USA • www .pelco .
2 Pelco Installation Manual C2432M-A (12/03) LIST OF T ABLES A Video Coaxial Cable Requirements .............................................................................................. ......................... 5 B 24 V A C Wiring Distances ....
Pelco Installation Manual C2432M-A (12/03) 3 IMPOR T ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed. CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes.
4 Pelco Installation Manual C2432M-A (12/03) c. Compress the spring clips on the back box and push it through the hole, until the clips spring back. Tighten the scre ws until you hear a clicking noise. Insert the two 8-32 x .250-inch screws to secure the back box to the mounting ring.
Pelco Installation Manual C2432M-A (12/03) 5 INST ALLA TION PENDANT MODELS MOUNT AND INST ALL THE BACK BOX NOTE: If installing outdoors make sure the installation is properly sealed to keep moisture out. a. Install the mount for the pendant dome. Refer to the instruc- tions supplied with the mount.
6 Pelco Installation Manual C2432M-A (12/03) BARREL KEY LOCK TRIM LEASH BALL STU D BALL STUD RECEIVER 00495 00495 LOWER DOME INST ALLA TION IN-CEILING MODEL a. Attach the lower dome trim leash to one of the 8-32 x .250-inch screws that secure the back box to the mounting ring.
Pelco Installation Manual C2432M-A (12/03) 7 SPECIFICA TIONS ELECTRICAL Input V oltage: 24 V A C (outdoor models only) Input Power: 62 vA (for heater) MECHANICAL Construction Back Box: Aluminum Mounting Bracket: Steel Lower Dome: Clear polycarbonate, 0.
8 Pelco Installation Manual C2432M-A (12/03) REVISION HISTOR Y Manual # Date Comments C2432M 7/01 Original version. C2432M-A 12/03 Per ECO #03-9442, changed dome material description from acrylic to clear polycarbonate. P elco, the P elco logo, Camclosure, Esprit, Gene x, Legacy , and Spectra are registered trademarks of P elco.
An important point after buying a device Pelco C2432M-A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C2432M-A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C2432M-A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C2432M-A you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C2432M-A will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C2432M-A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C2432M-A.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C2432M-A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C2432M-A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
