Instruction/ maintenance manual of the product S-150/DMX American DJ
Go to page of 2
SPECIFICA TIONS: MODEL - S-150/DMX W eight: 9lbs. Size: 3.25” x 9.25” x 9.5” Lamp: ZB-150 - (BT 200H) Fuse: 10A Inter nal Supply V oltage: 120V W orking Position: Any Safe position Duty Cycle: 5 min. ON/ 5 min. OFF S-150/DMX ™ American DJ ® User Instructions Affordable Quality Lighting Products from American DJ ® Los Angeles, CA.
APPENDIX 1. In DMX pack mode, please refer to the following illustrations for desired channel setting. 2. In self-test mode, please follow the below table for desired chase: 3.
An important point after buying a device American DJ S-150/DMX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American DJ S-150/DMX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American DJ S-150/DMX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American DJ S-150/DMX you will learn all the available features of the product, as well as information on its operation. The information that you get American DJ S-150/DMX will certainly help you make a decision on the purchase.
If you already are a holder of American DJ S-150/DMX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American DJ S-150/DMX.
However, one of the most important roles played by the user manual is to help in solving problems with American DJ S-150/DMX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American DJ S-150/DMX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
